3D Printing and Characterization of Multifunctional Carbon Fiber Structural Batteries Composites Using Photopolymer Resin |
3D Printing of Woven Carbon Fiber Composites via a Stereolithography-Inspired Technique with Consolidation |
3D Woven Triboelectric Nanogenerator for Energy Harvesting |
A Comprehensive and Innovative Damage-Based Strategy to Predict Fatigue Damage Evolution in Composite Laminates |
A Comprehensive Study on Long-Term Durability of Protective Epoxy Coatings for Electrified Roadways |
A coupled Thermo-Mechanical Phase Field Model to Predict Intra and Interlaminar Fracture in Fiber-Reinforced Polymer Composites at High-Temperature Environment |
A Fracture Mechanics Based Methodology to Address Face Sheet/Core Disbonding in Composite Sandwich Structures |
A Machine Learning Approach for Predicting Bending After Impact Strength and Failure Modes in Hybrid (CFRP/GFRP) Sandwich Composites |
A Machine Learning Based Damage Constitutive Model for Short Fiber
Reinforced Polymer (SFRP) Composite |
A Magnetic Field Assisted Accelerated Composites Volumetric Additive Manufacturing |
A Methodology Proposal for the Modelling, Analysis and Optimization of HAWT Blades Used in theNnorthern Region of Baja California, Mexico |
A micro-Mechanical Analysis of Tow Undulation Effects on Compressive Failure in Woven Composite Laminates |
A Review of Surface Analysis Technologies for Increasing Robustness of Composite Bonding in the Fleet |
A Simplified Method for Multiscale Simulation for SFRP |
A Study of ASTM C273 Core Shear Test Protocol |
A Study on Theoretical Analysis Method of Sandwich SCB Test Including Geometric Nonlinearity |
Abrasive Friction Drilling in Fiber Reinforced Thermosetting Polymer Composites |
Additive Continuous Tows Preform for Fiber Angle Optimized Composite Tube |
Additive Manufacturing of Continuous Carbon Fiber Thermoset Composites Based on Frontal Polymerization |
Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composite Grid Stiffened Panels |
Additive Manufacturing of Thermoset Composites via Infrared-Assisted Frontal Polymerization |
Additive Manufacturing of Wood Nanocomposites Using Natural Fibers |
Additively Manufactured Composites: Pioneering Customisable Tow-Preg Filaments to Deliver Tailored Material Properties |
Additively Manufactured Repairs for Composites |
Advanced Single Vacuum Bag Process for Efficient On-Aircraft Composite Repair |
Advancements in Thermo-Viscoelastic Composite Process Modeling through FEA Optimization |
Advances in Fiber Alignment Process for Highly Aligned Short Fiber Preforms for Thin Ply Composites |
Advancing Additively Manufactured Composite Structural Joints Testing with Discrete Computational Modeling and Digital Twins |
AI-Driven Process Control for Resin Transfer Molding |
AI-Empowered LS-Dyna ICME Simulation Technique for Multiscale Predictive Modeling of Composites |
Amorphous Bonding of a Carbon Fiber PEEK Thermoplastic Composite |
An Experimentally Validated Phase Field Model for Anisotropic Ductile Fracture in Additively Manufactured Metallic Materials |
Analysis of Anisotropic Inclusion Problems Using Complex Variables |
Analysis of Crack Propagation Transients in Accelerated Fatigue Characterization of Adhesives |
Analysis of Power, Vibration, and Feed Force Signals During Composite Drilling for Delamination Phenomenon Identification |
Analysis of Stress Concentration Effects in High Strain Composite Column Bending Tests Fixtures |
Analysis of Triangular Rollable and Collapsible Composite Booms Under the Effects of Gravity and Twist |
Application of SHM and Damage-Tolerance Design for Hydrogen Composite Pressure Vessel |
Assessing Impact Efficacy of Novel Additively Manufactured Sandwich Structures |
Assessing Micro-Void Formation at the Tips of Fibers within the Microstructure of Additively Manufactured Polymer Composite Bead |
Assessment of the Impact Behavior of Basalt/Epoxy Laminates and their End-of-Life Scenario as a Function of Impactor Mass, Temperature and Pyro-Gasification Parameters |
Basalt Fiber Composite: Characterization and Adaptation of ASTM Standard for Full Field Measurement |
Bayesian Calibration and Uncertainty Quantification of Cohesive Zone Parameters at an Adhesively Bonded Textile and Fabric Interface |
Benchmark Machine Learning Models in Design Optimization of Tow-Steered Composite Structures |
Bio-Based Epoxy Natural Fiber Composites for Marine Energy Harvesting |
Bonded Nutplate Adhesive Cure Investigation |
Breaking the Wavelength Barrier for Precursor Damage Estimation in Composite Structures Using Nonlinear Ultrasonics |
Buckypaper Enhanced Shape Memory Polymer Composites for Improved Thermo-Mechanical Properties and Electro-Active Recovery |
Calculating Mode Mixity in Interlaminar Fracture of Composite Laminates |
Carbon-Based Damage Sensor for Composite Structures |
Characterization of Electrical Conductivity in Unidirectional Thermoplastic Composite Laminates Joined by Induction Welding |
Characterization of Flexure-Induced Through-Thickness Fracture in Tape Laminate Composites Using Ex-Situ Computed Tomography |
Characterization of In-plane Compressive Response of Triangular Honeycomb Carbon Fiber Epoxy Composite Fabricated via Direct-Ink-Writing |
Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates |
Characterization of Mode I Fatigue Fracture in Tape Laminates and Adhesively Bonded Composites Based on the J-Integral Approach |
Characterization of Prepreg Tack Using an In-Situ Peel Test Method |
Characterization of Volumetric Damage in a Woven PMC with an Embedded Lightning Strike Protection Layer |
Characterizing Fiber-Matrix Interface Debonding and Transverse Cracking in Macro Fiber Sample Composites |
Characterizing the Mixed-Mode Tack/ Decohesion Response of Uncured Thermoset Carbon/ Epoxy Tows |
Characterizing the Process-Property Interrelationships in Additively Manufactured Fiber-Reinforced Composites |
Comparison of Fabricating Polymer-Fiber-Reinforced Polymers (PFRPs) Between Powder Impregnation and Film Stacking Methods |
Comparison of the Properties and Re-Processability of Isomeric Epoxy Imine Composites |
Composite Core Designs for Freeform Structures |
Composite Repair Using Thermo-Reversible Epoxy Vitrimers for Extending Service Life and Reducing Waste |
Composite Wind Blade Repair: A Parametric Study Accounting for the Effect of Moisture on Curing |
Compressive Strength Prediction of Carbon Fiber/Polyimide Composite at Elevated Temperature Using Micro/Meso-Scale Numerical Simulation Results |
Computational Assessment of the Opening Mode Facesheet-to-Core Fracture Toughness of a Thin-Gage Facesheet Sandwich Structure |
Computational Exploration of the Mechanical Behavior of High-Performance Epoxy |
Computational Modeling of Low-Velocity Impact Damage and Moisture Interaction in Polymer Composites |
Continuous Welding of Carbon Fiber Thermoplastic Composites Using Radio Frequency (RF) Fields |
Correlating Effects of Porosity with Interlaminar Strength of L-Shaped Composite Laminates |
Correlating Microscale Damage with Dielectric State Variable Characterized by Broadband Dielectric Spectroscopy (BbDS) |
Coupled Oxidation and Damage Model for SiC/SiC Ceramic Matrix Composites |
Coupled Thermomechanical RVE Analysis of Composite Effective Thermal Conductivities Including the Influence of Failure |
Crystallization Prediction for Pulsed Light Heating Systems in Automated Fiber Placement |
Cure Kinetics, Void Contents, and Thermal Properties of Short Carbon Fiber Reinforced Composites Processed through Frontal Polymerization (FP): An Experimental and Numerical Study |
Curing Simulation of Composites through 1D Multi-Field Finite Element Models |
Curvilinear Anisotropy for Notch Insensitive and Damage Tolerant Structures Under Torsion: An Analytical and Numerical Study |
Damage Assessment in Composite Materials with Thermal Methods |
Damage Evolution of Postbuckled Composite Single-Stringer Panels Subject to Compression After Impact |
Damage Imaging in Stiffened Composite Panels by Ultrasonic Sparse Array Matched Field Processing |
Damage Mechanisms in Chopped Strand Mat and Woven Roving Mat Composites Subjected to Tension-Tension, Compression-Compression and Tension-Compression Cyclic Loads |
Damage Progress of Plain Woven CFRP Under Tensile-Tensile Cyclic Loading |
Data-Driven Approaches for Assessing Compression After Low-Velocity Impact in Carbon Fiber Reinforced Composites |
Deep Learning Models for Automatic Image Segmentation of Low Velocity Impact Damage in CFRP Composites |
Deformation Analysis of Thermosetting FRP During Cure Process Using a Homogenization-Based FEA |
Dependence of Microstructure and Flexural Response of Thin-Shell Carbon Fiber/PA6 Composite on Ply Thickness |
Design for Manufacturing of Structures with Automated Fiber Placement via Integration of Analysis and Process Planning |
Design of a Pultrusion System for Hemp-Based Rebar |
Design of a Reduced Order Finite Element Model to Study the Effects of Microstructure Morphology on Composite Properties |
Design of Flexible and Ultrasensitive 3D Printed Flexoelectric Sensor for Self-Powered Damage Detection of Composite Structures |
Design Optimization and Analysis Validation of Complex Composite Parts Using Fiber Patch Placement |
Detection and Intelligent In-Situ Self-Healing of Damage in Composite Structures |
Detection and Localization of a Fold, Twist, and Overlaps Within Tow-Steered Composite Panels During Autoclave Cure |
Detection of Microscopic Defects in CFRP Using X-Ray Talbot-Lau Interferometry |
Determination of Mode I Interlaminar Fracture Energy and Cohesive Zone Modelling Parameters in Carbon/Epoxy Composites |
Developing Continuum Damage Model Tensors for Ceramic Matrix Composites Using Genetic Programming Based Symbolic Regression |
Development and Evaluation of a Leading Edge Shaped Radar-Absorbing Sandwich Composite with Lightning Strike Protection |
Development and Implementation of an Elasto-plastic, Failure and Fracture Model for Composite Materials |
Development and Sheet Molding Compound (SMC) of Polydimethylsiloxane Composites for Thermal Insulation Applications |
Development of a Combined Cohesive and Virtual Crack-Closure Technique Approach to Represent R-Curves |
Development of a Fatigue Model for Prediction of Bondline Failure in Polymer Matrix Composites (PMCs) Using Abaqus and the Extended Finite Element Method |
Development of a Higher-Level Building Block Testing Standard Using Seven Point Bend Configuration for Performance Evaluation at Scale |
Development of Auxetic Composite Materials for Improved Impact Properties |
Development of Data-Driven Surrogate Models for Rapid Simulation of Fibre Reinforced Composites in Progressive Fracture Tests |
Development of Hierarchical Multifunctional Polymeric and Ceramic Nanocomposites |
Development of Machine Learning Based Method for Prediction Complete Delamination Morphology |
Diagnosis and Optimization of Prepreg Curing with Rheology |
Digital Light Processing of Solvent-Free Graphite Nanoparticles and Edge-Oxidized Graphite Oxide-Acrylic Nanocomposites |
Discerning Microstructure of CMC Minicomposites from Micro-CT Imaging Data Using Machine Learning |
Does Micromechanics Work for Predicting the Transverse Tensile Strength of a Composite? |
Dual-Cure Cladding Enabled Additive Manufacturing of Continuous Carbon Fiber/Epoxy Composites |
Dynamic Response of Liquid Composite Reinforced Thin-Walled Tube |
Effect of Bi-Axial Tensile Loading on the Helium Gas Leakage Behavior of Thin-Ply CFRP Laminates |
Effect of Eccentric Compression Load on Failure of Pultruded Glass Fibre-Reinforced Polymer Composites |
Effect of Edge Gluing on Failure Modes in Notched Cross-Laminated Timber Under Bending Loads |
Effect of Environmental Aging on the Thermal and Chemical Properties of Flax Fiber-Polypropylene Natural Fiber Reinforced Thermoplastic Composites |
Effect of Fiber Angle on the Radial Stress in Hybrid Aluminum/Composite Tubes |
Effect of Fiber Clustering on Void Formation in Additive Manufacturing of Continuous Carbon Fiber Thermoset Composites |
Effect of Manufacturing Imperfections in Sandwich Composites with Aluminum Honeycomb in Multi-Axial Loading |
Effect of Polymeric Nanofibrous Veils on Co-Cured Joint Strength |
Effects of Embroidery Lock-Stitching on the Tension-Shear Mechanics of Textile Reinforcements |
Effects of Repair Reinforcement on Scarf Joint Strength |
Efficient Depolymerization of Amine-Cured Epoxy Composite and Recovery of Bisphenol-A by a NaOH_KOH Eutectic |
Efficient Design of Laminate Composites Using Ensemble Kalman Inversion Method |
Efficient Manufacturing of Carbon Fiber Reinforced EPON-Based Epoxy Resin Composites via Hot Press-Triggered Frontal Polymerization |
Electrochemical Synthesis of Gold Nanoparticles-Biopolymer Nanocomposite to be Used as Biosensor Surfaces |
Elemental Sulfur Assisted Interface Functionalization of Woven Carbon Fiber PEEK Composites |
Elucidating the Effect of Vertical Aligned Carbon Nanotubes on the Progressive Failure of Tow-Based Discontinuous Composites |
Energy Absorption Characteristics of Additively Manufactured Composite Tube-Reinforced Polymer Honeycomb |
Engineering Advanced Glass Fiber Reinforced-Shape Memory Composites Via Mechanochemistry and Transparent Conductive Oxides |
Enhancement Method of the Paper Strengths by Infiltrating Photocurable Resin and Cellulose Nanofibers |
Enhancement of Interlaminar Strength of 3D-Printed Carbon Fiber Reinforced Plastic by Layer-Wise Compaction |
Enhancing Fracture Properties through Fiber Waviness Manufactured Using Tailored Fiber Placement |
Enhancing Mechanical Properties of Flax Stems through Nanoparticle Uptake |
Enhancing Thermal and Mechanical Properties of Polypropylene Composites Using Agave Fibers: A Sustainable Approach for Green Composite Materials |
Evaluating Process-Induced Residual Strains in Multi-Material Single-Lap Joints Using an Experimental Approach |
Evaluation Marcelling in Composites Using Ultrasonic Guided Wave |
Evaluation of Alumina Particle Reinforced Aluminum Matrix Composites Fabricated by Accumulative Roll Bonding Method |
Evaluation of an Intralaminar and Interlaminar Fiber-Aligned Finite Element Technique for Analyzing High-Energy Impact Damage on Composite Panel. |
Evaluation of Interlaminar Fracture Toughness of Out of Plane Wrinkled Prepreg Woven CFRP Laminates |
Evaluation of Low Viscosity Epoxy Repair Resins for Delamination Injection Repair |
Evaluation of the Permeability of Carbon/Carbon Composites to Characterize the Pyrolysis and Re-Infiltration of the Carbon Precursor During Densification |
Evaluation on Fatigue Degradation and Residual Strength of Composite Pressure Vessel |
Exceeding Structural Lifetimes: Asymptotic Self-Healing in Fiber-reinforced Polymer Composites
|
Experiment and Simulation Study of Compression Behaviors of Beam and Honeycomb Lattices |
Experimental and Numerical Investigation of Shear-Driven Fracture in Hybrid Tape/Fabric-Laminate End-Loaded-Split Specimens |
Experimental Characterization of Mode II Traction-Separation Laws for Adhesively-Bonded Composites Using an End-Loaded Split Configuration |
Experimental Measurement of Mode-I and Mode-II Traction Separation Laws for Delamination in Plain-Weave Glass Epoxy Composites |
Experimental Setup for Mechanically Testing Subscale Triangular, Rollable, and Collapsible Deployable Composite Booms |
Exploring 3D-Printed Ceramics: A Study in Nano-Reinforced Composites |
Exploring Resistive (Joule) Heating for Energy-Efficient Bonding/De-Bonding of Composites |
Extensional Viscosity and Microstructural Evolution of Highly Aligned Discontinuous Fiber Composites in Forming |
Extrusion-Based Additive Manufacturing of Large Composite Structures for Aerospace Applications |
Failure Mechanism and Energy Absorption Characteristics of Auxetic Pyrolytic Carbon Reinforcements Embedded in Different Matrix Materials |
Failure Prediction of Fiber-Reinforced Polymer Composite Materials Using Data-Driven Modeling |
Fatigue-Life Prediction and Design for Uncracked and Cracked Components: Determinstic, A- and B-Basis Probabilistic, or Reliabilty Target Approach |
Fatigue Behavior of Additively Manufactured BN/PEEK/PEI Blended Composites |
Fatigue Failure Analysis of Bolted Joints Hybrid CFRP/Steel Fiber Metal Laminate |
Fatigue Simulation for Damage Accumulation in Laminated Composites Using Microscopic Model and CZM-Based Extended Finite Element Method |
Fiber Interface Modification via Aqueous Dispersion-Based Electrophoretic Deposition of High-Performance Thermoplastics and Resistive Joule Heating Process |
Fracturing Behavior and Scaling of Additively Manufactured Continuous Fiber Composites |
Frequency and Time Domain Analysis of Guided Waves in Plate-Like Structures |
Frontal-Polymerization-Based Manufacturing of Composite Panels: Effect of Reinforcement Geometry |
Fused Deposition Modeling (FDM) of PolyEtherKetoneKetone (PEKK): Tailoring Tensile Strength via Process Parameter Optimization |
Gamma-Ray Irradiation of CNT yarns for Improved Composite Strength: A Molecular Dynamics Study |
Gas diffusion nonwoven carbon paper for fuel cell with controllable contact resistance and hydrophobicity by laser engraving |
Heat Damage Modeling and Simulation of Polymer Composite Structures |
Heating of thermoplastic composite tape using Arc-flash lamp used in Automated Fiber Placement manufacturing |
Hierarchical multiscale process modeling of a textile composite Y-joint for the Aurora D8 aircraft |
High-Fidelity Modeling of Bondline Failure in Polymeric Matrix Composites Considering the Effects of Manufacturing Defects |
High-Throughput Test for Rare-event Reliability
Evaluation of 3D-Printed Composites |
Highly compressed degradable natural fibre composites for circular bioeconomy |
Hybrid Green Composites using Soy Protein-based Resin, Rice Straw and Jute Fabrics |
Hygroscopicity of 3D Printed Carbon Fiber Reinforced Polymeric Composites |
Identification of damage parameters under the uneven damage development in carbon fiber reinforced plastic |
Identification of Optimal Processing Parameters for Defect Minimization in Agave/Epoxy Composites Manufactured from Vacuum-Assisted Resin Infusion |
Image-based failure assessment of Li-ion batteries |
Image-Based RKPM for Accessing Failure Mechanisms in Composite Materials |
Impact Fatigue in Carbon Fiber Reinforced Composites |
Implanted sensor for the monitoring of temperature of incoming tape in automated fiber placement of thermoplastic composites |
Implementing Machine Learning Methodologies to Characterize Hidden Damages in Composite Plates Through Lamb Waves
|
Improved deposition rates in additive manufacturing of commingled tow-based continuous fiber-reinforced composites via alternating tow positioning |
Improvement of Fatigue Life of Unidirectional Carbon Fiber Composite by Modification of Vinyl Ester Matrix with Rubber Particles under cryogenic condition |
Improving Composite Tailorability through Architected Nacre Tablets |
Improving Impact Toughness of Carbon Fiber Reinforced Composite Laminates Using Shear-Toughened Gel (STG): Mechanism and Performance Optimization |
Improving Nondestructive Evaluation of Additively Manufactured Composites using Ultrasound Data Fusion |
Improving shear strength of adhesively bonded joints by out-of-plane compression for composite pressure vessels |
In-Plane Mechanical and Piezoresistive Properties of Unidirectional Multifunctional Composites |
In-situ Characterization of TuFF Composite Blanks in Diaphragm Forming |
In-situ measurement of damage appearance and growth during ballistic impact tests on composite materials |
In situ X-ray nCT experiment showing slope instabilities in PMC microstructures |
Influence of Boundary Conditions and Crack Spacing in Simulation of Low Velocity Impact Response of Composite Laminated Plate |
Influence of fiber aspect ratio on the mechanical performance of highly aligned short fiber composites |
Influence of Nanoparticle-Reinforced Elium Thermoplastics on Lap Shear Strength of GFRP Joints |
Influence of Shear on Crystallization Kinetics in Poly (ether ketone ketone) Nanocomposites |
Infrared Thermography based rapid fatigue characterization of woven FRP composites with complex geometry |
Innovative Joining Method for Hybrid Composites with Tailored Performance |
Integrated Process and Failure Analysis in Composites Using Multi-fidelity Simulations and Machine Learning |
Integrating simulation and machine learning for accelerated analysis of composite curing |
Interesting properties of 3D woven composite material made with different bio-sourced yarns |
Interfacial Polymerization: A Scalable Pathway for Nanocomposite Manufacturing. |
Interlaminar Fracture Toughness Evaluation of a Unidirectional Slit Tape Thermoplastic Composite |
Interlaminar Shear Strength of Carbon/Epoxy Laminates Containing Magnetically Aligned Nickel-Coated, Diazotized Carbon Nanotubes |
Intrinsic Self-healing of Vitrimeric Carbon Fiber Reinforced Polymer Composites |
Investigating Effects of Oxidation of Graphene Quantum-dot in Epoxy Composites – A Molecular Dynamics study |
Investigating the Low-Velocity Impact Resistance of Helicoidal and Double Double 3D Printed Carbon Fiber Reinforced Polymer Layups |
Investigating the significance of the R-curve in interlaminar crack growth of composites subjected to fatigue loading |
Investigating Vacuum Bag-Only Consolidation of CF-PEEK Panels Made via Automated Fiber Placement |
Investigation of Lamb wave characteristics in
composite oriented strand board plates |
Investigation of the Effect of Balsa Wood Core in a Curing Laminate Repair Using Process Modeling |
Investigation on multifunctional properties of polyurethane/halloysite nanotube nanocomposites via fused deposition modelling |
Isogeometric topology optimization for additively manufactured composites |
Jeff Gnacinski_TMS_Test for Proceedings |
Joining and Other Unique Thermoplastic Challenges for Aircraft Applications |
Lamellar Structure of High-Strength Direct-Spun CNT Yarns |
Laser-induced graphene-aramid fabric composite as radar absorbing structure for stealth aircrafts |
Leveraging Profilometry-Based Inspection Data to Capture Green-State Laminate Thickness of Automated Fiber Placement Structures |
Localization of Impact Damage in Composite Material Subjected to Mechanical Loading using Electrical Impedance Tomography |
Longitudinal debonding of single-fibre composites observed via in-situ synchrotron computed tomography at a 150 nm resolution |
Manufacturing Defects in Carbon Fiber-Reinforced Woven Composites made of Repurposed Prepreg Scraps |
Manufacturing of Scalable Hybrid Carbon Nanotube/Carbon Reinforced Polymer Composites |
Material characterization of flat laminate of carbon fiber reinforced plastic with filament winding structure manufactured on a hexagonal shaped mandrel |
Material Hybridization for Tunable TPMS Metastructures |
Material Processing of Ceramic Matrix Composites with Silicon Carbide Matrix for Microstructure Analysis |
Matrix crack propagation behavior of cross-ply CFRP laminates at cryogenic temperature |
Mechanical Behavior of MXene-Polymer Layered Nanocomposite Using
Computational Finite Element Analysis |
Mechanical behavior of sustainable woven composites with architected Tencel fabric |
Mechanical Properties and Durability of MXene Films for EMI Shielding |
Mechanical Properties of Sisal Fiber Biochar Reinforced Epoxy Composite |
Mechanical Property and Thermal Stability Characterization of Additively Manufactured Chicken Feather Fiber/Polybutylene Succinate (PBS) Green Composites |
Mechanical Recycling of 3D Printed Carbon Fiber Reinforced Composites for Increased Sustainability Through a Reduction of Waste Material |
Mechanisms of Atomic Oxygen Erosion of Fiber-Reinforced Composites |
Micro-computed tomography to characterize in situ control of fiber volume fractions in fused filament fabrication |
Micromechanical modeling of additively manufactured short fiber composites |
Micromechanics Surrogate Model for Fatigue Life Prediction of Polymer and Ceramic Matrix Composites |
Microplastics Recovering System Development: Phase 1 - Mechanical Characterization of Nanomembranes with Taylor Wettability |
Microstructural variability in composite pressure vessels and its effects on mechanical performance studied by computed tomography |
Microstructure and manufacturing process impact on effective material properties in carbon/ultra-high-molecular-weight-polyethylene nanocomposites |
Mode-I interlaminar toughness of Prepreg Platelet Molded Composites |
Mode II delamination response of nanofiber interlayered filament wound CFRP laminates under cryogenic conditions |
Modeling Failure of a Single Fiber Pull-out Test with a Finite Volume Method
|
Modeling Fatigue Performance of Short Fiber Reinforced Plastics |
Modeling the Deformation and Failure of 3D Woven CNT Composites |
Modeling the Microstructure-Dependent Elastic Modulus and Ionic Conductivity of Structural Battery Electrolyte for Low-Temperature Applications |
Modeling the Polymerization and Pyrolysis of SMP10 via Reactive Molecular Dynamics |
Modeling the Strain Softening Behavior of Aligned Discontinuous Fiber Prepreg during Thermoforming |
Molecular Dynamics Approach to Process Modeling and Material Characterization of PAN-based Carbon Fiber |
Molecular Dynamics Investigation of Bonding
Structure and Property Relationships at the
Interface Between Cellulose Nanocrystals and
Glass Fibers |
Molecular Dynamics Prediction of Strain Rate-Induced Failure Mode Transitions in Crystalline Polyethylene |
Multi-scale Finite Element modelling of the tensile behavior of pseudo-ductile composites |
Multiphysics Simulations of CFRP Degradation in Fire |
Multiscale analysis of thermal barrier coated CFRP composites |
Multiscale and Multifidelity Modeling of a 3D Woven Composite Thermal Protection System |
Multiscale modeling for predicting mechanical properties of open hole laminates in 3D-printed carbon-fiber-reinforced thermoplastics |
Multiscale Modeling of the Effect of Semi-crystalline Morphology on the Thermomechanical Response of Thermoplastic Composites |
Multiscale modeling to analyze failure of welded joint of thermosetting carbon-fiber-reinforced composites |
Multiscale simulation of failure in fiber composites |
Nanomechanics of Plant Cell Wall for Bioinspired Composite Design |
Natural Fiber Reinforced Vitrimer Biocomposite with Enhanced Chemical Recyclability |
Near Infrared Models for Non Destructive Evaluation of Low Velocity Impact Damage in Polymer Composites
|
Non-destructive investigation of materials damage and fatigue by neutrons scattering |
Non-destructive Techniques for Characterization of Damage and Thermomechanical Signatures for Optimizing Composite Drilling |
Nondestructive Inspection Method to Characterize Thermoset Prepreg Quality and the Effect of Material Process Conditions on Formability |
Nondestructive Ultrasonic Testing of Aerospace Composite Parts via Efficient Inversion of Elastic Constants |
Numerical Methodology for Wrinkling Prediction in Automated Fiber Placement |
On the applicability of transverse loading experimental method for determining tensile strength of single carbon fibers at microscale gage-lengths. |
Open-hole Testing of Resin Infused Carbon Composite Laminates to Facilitate Damage Growth and Failure Analysis Tools for Structural Design |
Optimal Design of Viscoelastic Laminated Sandwich Composite Structures considering Thermally-induced Deformation of Composite Skins using Lamination Parameters |
Optimization of electromagnetic induction heating for adhesive bonding – A computational study on induction bonding process |
Optimized Design Workflow for Patient-Customized Composite Orthotics |
Opto-vascular Synchrony for Autonomous Self-healing and Self-sensing in Structural Polymers and Composites
|
Origami and Kirigami-inspired Sandwich Panels for UAM Primary Structural Applications |
Out-of-plane compression behavior of the carbon fiber reinforced plastic for composite pressure vessel |
Oxidative Aging of Recyclable and Conventional Thermosets |
Performance of Cross-Laminated-Timber Against Rolling Shear Failure due to Out-of-Plane Bending |
Peridynamic Simulations of Damage Initiation and Propagation of Microstructural Experiments |
Physics-based Simulation of Bondline Thickness Evolution during the Cure Process |
Piezoresistivity analysis of polymer composite piezoresistors and validation via Monte Carlo simulations |
Plasma treatment of aramid, glass, and flax fabrics to increase the mechanical properties of FRP composites |
Plasma Treatment of Carbon Nanotube Composites for Aerospace Structures |
Point Cloud Failure Criterion for Orthotropic Composite Materials |
Post-Multiple-Impact Damage Characterization in CFRP Laminates using X-ray Micro-Computed Tomography |
Predicting effective properties of unidirectional non-crimp fabric composites with manufacturing-induced defects using a multiscale ANN model |
Predicting Fracture Toughness in Polymer Nanocomposites using Concurrently Coupled Atomistic-Continuum Simulations |
Predicting Macroscopic Mechanical Properties of Fiber Reinforced Composites Based on Microscale Fiber Morphologies |
Predicting the Compaction Response of a Plain Woven Textile Incorporating Fiber Entanglement |
Prediction of Long-Term Deformation Caused by Process-Induced Residual Stresses in Cross-Ply Laminates |
Prediction of process-induced deformations in thermoset composites using a higher-order FE-based ICME framework |
Preparing lattice structures using continuous carbon fibers and thermoset composites |
Progressive damage analysis of CFRP pressure vessels with dome/cylinder bonded structure |
Progressive damage analysis of complex 3D textile based composite parts using discrete damage modeling and independent mesh method |
Progressive Damage Modeling of Stitched Double Cantilevered Beam Specimens Using Cohesive Zones |
Qualification of Type VII Blast Media For Paint Removal on Thin Carbon Fiber/Fiberglass Epoxy Composites and Epoxy/Metal Mesh Lightning Protection Materials |
Quantitative Analysis of Ultrasonic Guided Wave Interactions with Single-Mode Damage in Composite Laminates |
Quantitative Comparison of Local Strain Data in Micromechanics Models and Experiments of Composite Micropillars |
Quantum-Informed Reactive Molecular Dynamics for In Situ Polymerization of Nanocomposites |
Quasi-Static Properties of 5320-1/IM7 12K Unidirectional Laminates Toughened with Vertically Aligned Carbon Nanotubes |
Rapid Curing Isothermal Resins for Aerospace Applications |
Rapid process modeling and residual stress evaluation of 3D-woven CNT/epoxy composites via higher-order FE modeling |
Rectifying Efficiency Measures for Vascular Based Thermal Regulation in Fiber-reinforced Polymer Composites |
Recycled Poly(ethylene terephthalate) for a Circular Economy Approach: Case Study of a 3D Printed Wind Energy Generator |
Reliability-based design and certification of hybrid composites |
Repairing of CFRP composites using UV-induced frontal polymerization |
Residual Strength and Stiffness of Reclaimed Lumber and Cross Laminated Timber: Toward Structural Reuse in Net Negative/Zero Carbon Buildings |
Residual strength prediction of composites after fatigue loading |
Resilient Behavior of Additive Manufactured CF/Nylon Origami Hybrid Composites for Aerospace Damping |
Response Surface Based Thermo-mechanical Material Property Search Approach To Avoid Matrix Cracking in CFRP Pressure Vessels |
Role of free-volumes in mechanical response of thermoset resins |
Scalable Fabrication of Carbon Fiber-Based Cathode with Networked Heterostructures for Structural Energy Storage Composites |
Self-catalysed frontal polymerisation enables fast & energy-efficient composite manufacturing |
Self-healing and thermal transport behavior of mxene vitrimer composite |
Shear Connection Analysis in G-FRP Composite Beams: Experimental and FEM Study |
Shell-Type Element for Composite Bonded Joint Design |
Shrinkage Induced Distortions in Symmetric Laminates of Double Curvature |
Simulating High Energy Dynamic Impact of IM7/PEKK Continuous Fiber Laminated Thermoplastic Composite using Notched Coupon Experiments |
Simulating the crystal growth of PPS using molecular dynamic methods |
Simultaneous multi-layer topology and toolpath optimization |
Solving the Internal Strain Field in 3D Random Short Fiber Composites using Known Surface Strains |
Stability Analysis of Linked Tape Spring Shells with Steered Fiber Paths |
Stack Drilling of Carbon Fiber Reinforced Polymer Laminate and Metals Stacks Using Friction Flow Drilling |
Statistical Multiscale Progressive Failure Analysis of Unbalanced Plain Weave Composites |
Stiffness and Strength Uncertainty Quantification for Fused Filament Fabricated Composites |
STOCHASTIC NON-LINEAR BUCKLING ANALYSIS OF VARIABLE ANGLE TOW COMPOSITES |
Strength Prediction for Composite Parts Utilizing the Material Modeling Approach
|
Strengthening Multifunctional Graphene Oxide Films with Carbon Nanofibers |
Stress-based analysis using an extended variational approach for composite laminates with alternating material properties in the loading direction |
Stretch Steering of Aligned Discontinuous Fiber Tapes using Laser Tape Placement: Minimizing Placement Defects |
Structural Integrity Characterization of Multifunctional Energy Storage Composites |
Structural Sizing of a 50-m-Tall Thermoplastic Composite Solar Array Truss Tower Structure for the Lunar South Pole |
Structure-Density-Mechanical Properties of Amorphous Carbon Investigation using ReaxFF Molecular Dynamics |
Synergistic enhancement of mechanical properties in Flax fibers by supercritical fluid and TiO2 nanoparticles |
Tension-Tension Fatigue Behavior of Carbon/Epoxy Composites with Carbon Nanotube Interlayers |
Testing and Simulation of an Off-Axis Composite Micro-Pillar |
The Effect of Various Processing Parameters on the Mechanical Properties of Doctor-bladed Graphene Oxide Films |
Theoretical analysis of CFRP composite laminates under compression with small ply angle change using Thin-Ply composites |
Thermal and Pressure Modeling in Laser-Assisted Automated Fiber Placement |
Thermal modeling for autoclave curing of composite structures: From high-fidelity thermal CFD to physics-informed machine learning |
Thermo-mechanical Piezoresistive Behavior of UD Multifunctional Composite Laminates for Next Generation Aircraft Structures |
Thermophysical And Thermomechanical Characterization of Thermoplastic Composites for Predicting Process-Induced Deformations |
Three-dimensional structural analysis of shell structures using MSG based beam model. |
Time-frequency analysis for interlaminar defect characterization in composite plates through ultrasonic guided waves |
Toward realistic simulation of transient events within an efficient workflow using implicit and explicit solvers: Application to laminated composite materials |
Transfer learning for multiscale analysis: modeling delamination of carbon-reinforced composite material |
Uncertainty Quantification in Advanced Aerospace Composite Manufacturing Through Stochastic Finite Element Analysis and Probabilistic Machine Learning |
Understanding Fatigue Behavior of Additively Manufactured Compression Molded Short Fiber Reinforced Thermoplastics with Process Defects. |
Understanding Strain Rates and Defects in Composite Energy Absorbers |
Understanding the Loading Memory of Composites Using Ultrasonic Inspection |
Unlocking Optimal Performance: Investigating Superior Strategies for Intermittent Fibre-Matrix Interface Enhancement |
Unsupervised Learning of Damage Modes During Fatigue of Composites |
Use of Convolutional Neural Networks for Microscale Simulations in Progressive Damage Analysis in Composites |
Using Neural Network to Improve Failure Predictions |
Utilizing Through Thickness Frontal Polymerization for Rapid and Continuous Lamination of Carbon Fiber Beams |
Validating Coarse-Grained Models of Thermoplastics for Fusion Welding |
Viscoelastic Behavior of Highly Aligned Discontinuous Fiber Thermoplastic Melts |
Vitrimer-Based Recyclable Hydrogen Storage Vessels |
Water Absorption Properties and Tensile Strength of Carbon Fibers/Polyamide 6 Composite Formed by Fused-Deposition-Modeling-Type 3D Printer |
Wet Compression Molding of Biocomposites – A Case Study |
Wrinkle Deformation of Curved Prepreg Slit-Tapes Tow-Steered Laminates During Automated Fiber Placement |