ProgramMaster Logo
Conference Tools for 2025 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2025 TMS Annual Meeting & Exhibition
Symposium Melt Processing, Casting and Recycling
Presentation Title Dynamics of Hydrogen in Aluminium in Contact with Humid Atmosphere
Author(s) Martin Syvertsen, Halvor Dalaker
On-Site Speaker (Planned) Martin Syvertsen
Abstract Scope Most melting and holding furnaces in casthouses are heated with gas burners. These gas burners give high concentrations of water vapour in the atmosphere. The concentration of water vapour is dependent on both burner configuration and furnace design (excess air entrainment), as well as fuel. The issue will become even more relevant if more hydrogen is being used in burners in a push towards decarbonisation. High levels of water vapour have previously been shown to correlate with high levels of dissolved hydro-gen and this is supported in this article. This paper shows the dynamic transport of hydrogen absorption into the melt and hydrogen evaporation out of the melt. Mass transfer coefficients for both absorption and evaporation are presented, and the measurements show that absorption of hydrogen from water vapour into the melt is faster than evaporation.
Proceedings Inclusion? Planned: Light Metals
Keywords Aluminum, Recycling and Secondary Recovery, Sustainability

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Application of Digital Twins for Complete DC-Casting Lines
BATSCAN – A Breakthrough for Industrial Inclusion Measurement in Aluminium Casthouses
Development of Numerical Model of Plasma Burner for Primary Aluminium Casthouses
Dynamics of Hydrogen in Aluminium in Contact with Humid Atmosphere
In Situ Observations of the Nucleation and Growth of Al-Si-Fe-Mn Intermetallics in Model Aluminium Alloys
Investigating the Castability of Recycling AZ91 Machining Chips Through Shape Casting
Investigation of Al6(Fe, Mn) Intermetallics Formation on AA8006 Aluminum Alloy Produced by Twin-Roll Casting at Different Solidification Conditions
Investigation of the Effect of Lacquered and Delacquered Scrap on Casting Impurities for Recycling Efficiency
Liquid Composition Analysis of Wrought Aluminum Alloys Using Laser-Induced Breakdown Spectroscopy (LIBS) for Industrial Furnace Applications
Modeling and Simulation of Cold Hearth Continuous Casting of Titanium Alloys
On the Influence of Oxide Layer Formation and Alloying in the Mg Vapor Pressure for Ternary Dilute Al-Mg Alloys
Optimizing Solid and Liquid Loading Times in Aluminium Melting Furnaces: Enhancing Efficiency and Process Control with SmartMelt Technology
Oxidation of Aluminium Melts in Dry and Moist Atmospheres
Removal Efficiencies of Hydrogen and Inclusions in a Combined Filter with De-Gassing and CFF
Removal of Metallic Impurities from Aluminum Alloy Using Gravity Sedimentation Technique
Removal of Zn and Other Volatile Elements from Molten Al by Vacuum Refining
Review of Recent Catastrophic Molten Metal Explosions and Their Causes
Sedimentation of Inclusions In Melts of Aerospace Structural Aluminium Alloy Castings: A Sustainable Approach
Smart Sensors for Additive Manufacturing and Aluminum Foundry 4.0 Initiatives
The Effect of Nucleating Particle Agglomerates on Grain Refiner Efficiency of 7xxx Aluminium Alloys
The Relationship Between Casting Thickness and Surface Quality of 8079 Alloy Foils in Twin-Roll Casting
ThermaSiC Coating for Applications in Contact with Molten Aluminum
Tracking Primary Al3Ti and Al3Zr Phase Formation in Liquid Aluminum Alloys Using LIBS
Ultra-Short Process for Producing Pure Nickel Casting Strip

Questions about ProgramMaster? Contact programming@programmaster.org