3D Printing and Characterization of Multifunctional Carbon Fiber Structural Batteries Composites Using Photopolymer Resin

3D Printing of Woven Carbon Fiber Composites via a Stereolithography-Inspired Technique with Consolidation

3D Woven Triboelectric Nanogenerator for Energy Harvesting

A Comprehensive and Innovative Damage-Based Strategy to Predict Fatigue Damage Evolution in Composite Laminates

A Comprehensive Study on Long-Term Durability of Protective Epoxy Coatings for Electrified Roadways

A coupled Thermo-Mechanical Phase Field Model to Predict Intra and Interlaminar Fracture in Fiber-Reinforced Polymer Composites at High-Temperature Environment

A Fracture Mechanics Based Methodology to Address Face Sheet/Core Disbonding in Composite Sandwich Structures

A Machine Learning Approach for Predicting Bending After Impact Strength and Failure Modes in Hybrid (CFRP/GFRP) Sandwich Composites

A Methodology Proposal for the Modelling, Analysis and Optimization of HAWT Blades Used in theNnorthern Region of Baja California, Mexico

A Review of Surface Analysis Technologies for Increasing Robustness of Composite Bonding in the Fleet

A Simplified Method for Multiscale Simulation for SFRP

A Study of ASTM C273 Core Shear Test Protocol

A Study on Theoretical Analysis Method of Sandwich SCB Test Including Geometric Nonlinearity

Abrasive Friction Drilling in Fiber Reinforced Thermosetting Polymer Composites

Additive Continuous Tows Preform for Fiber Angle Optimized Composite Tube

Additive Manufacturing of Continuous Carbon Fiber Thermoset Composites Based on Frontal Polymerization

Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composite Grid Stiffened Panels

Additive Manufacturing of Wood Nanocomposites Using Natural Fibers

Additively Manufactured Composites: Pioneering Customisable Tow-Preg Filaments to Deliver Tailored Material Properties

Additively Manufactured Repairs for Composites

Advanced Single Vacuum Bag Process for Efficient On-Aircraft Composite Repair

Advancements in Thermo-Viscoelastic Composite Process Modeling through FEA Optimization

Advancing Additively Manufactured Composite Structural Joints Testing with Discrete Computational Modeling and Digital Twins

AI-Driven Process Control for Resin Transfer Molding

AI-Empowered LS-Dyna ICME Simulation Technique for Multiscale Predictive Modeling of Composites

Amorphous Bonding of a Carbon Fiber PEEK Thermoplastic Composite

An Aero Industry Perspective on Composites Science and Technology

Analysis of Anisotropic Inclusion Problems Using Complex Variables

Analysis of Crack Propagation Transients in Accelerated Fatigue Characterization of Adhesives

Analysis of Stress Concentration Effects in High Strain Composite Column Bending Tests Fixtures

Analysis of Triangular Rollable and Collapsible Composite Booms Under the Effects of Gravity and Twist

Application of SHM and Damage-Tolerance Design for Hydrogen Composite Pressure Vessel

Assessing Impact Efficacy of Novel Additively Manufactured Sandwich Structures

Assessing Micro-Void Formation at the Tips of Fibers within the Microstructure of Additively Manufactured Polymer Composite Bead

Assessment of the Impact Behavior of Basalt/Epoxy Laminates and their End-of-Life Scenario as a Function of Impactor Mass, Temperature and Pyro-Gasification Parameters

Basalt Fiber Composite: Characterization and Adaptation of ASTM Standard for Full Field Measurement

Bayesian Calibration and Uncertainty Quantification of Cohesive Zone Parameters at an Adhesively Bonded Textile and Fabric Interface

Benchmark Machine Learning Models in Design Optimization of Tow-Steered Composite Structures

Bio-Based Epoxy Natural Fiber Composites for Marine Energy Harvesting

Bonded Nutplate Adhesive Cure Investigation

Breaking the Wavelength Barrier for Precursor Damage Estimation in Composite Structures Using Nonlinear Ultrasonics

Buckypaper Enhanced Shape Memory Polymer Composites for Improved Thermo-Mechanical Properties and Electro-Active Recovery

Calculating Mode Mixity in Interlaminar Fracture of Composite Laminates

Characterization of Flexure-Induced Through-Thickness Fracture in Tape Laminate Composites Using Ex-Situ Computed Tomography

Characterization of In-plane Compressive Response of Triangular Honeycomb Carbon Fiber Epoxy Composite Fabricated via Direct-Ink-Writing

Characterization of Interfacial Strength Between Carbon Fiber and Matrix Resin in CFRP Laminates by Pulse Laser Spallation Method

Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates

Characterization of Prepreg Tack Using an In-Situ Peel Test Method

Characterizing Fiber-Matrix Interface Debonding and Transverse Cracking in Macro Fiber Sample Composites

Characterizing the Mixed-Mode Tack/ Decohesion Response of Uncured Thermoset Carbon/ Epoxy Tows

Comparison of Fabricating Polymer-Fiber-Reinforced Polymers (PFRPs) Between Powder Impregnation and Film Stacking Methods

Comparison of the Properties and Re-Processability of Isomeric Epoxy Imine Composites

Composite Core Designs for Freeform Structures

Composite Repair Using Thermo-Reversible Epoxy Vitrimers for Extending Service Life and Reducing Waste

Compressive Strength Prediction of Carbon Fiber/Polyimide Composite at Elevated Temperature Using Micro/Meso-Scale Numerical Simulation Results

Computational Assessment of the Opening Mode Facesheet-to-Core Fracture Toughness of a Thin-Gage Facesheet Sandwich Structure

Computational Exploration of the Mechanical Behavior of High-Performance Epoxy

Correlating Microscale Damage with Dielectric State Variable Characterized by Broadband Dielectric Spectroscopy (BbDS)

Coupled Oxidation and Damage Model for SiC/SiC Ceramic Matrix Composites

Cure Kinetics, Void Contents, and Thermal Properties of Short Carbon Fiber Reinforced Composites Processed through Frontal Polymerization (FP): An Experimental and Numerical Study

Curing Simulation of Composites through 1D Multi-Field Finite Element Models

Damage Assessment in Composite Materials with Thermal Methods

Damage Evolution of Postbuckled Composite Single-Stringer Panels Subject to Compression After Impact

Damage Imaging in Stiffened Composite Panels by Ultrasonic Sparse Array Matched Field Processing

Damage Mechanisms in Chopped Strand Mat and Woven Roving Mat Composites Subjected to Tension-Tension, Compression-Compression and Tension-Compression Cyclic Loads

Damage Progress of Plain Woven CFRP Under Tensile-Tensile Cyclic Loading

Data-Driven Approaches for Assessing Compression After Low-Velocity Impact in Carbon Fiber Reinforced Composites

Deep Learning Models for Automatic Image Segmentation of Low Velocity Impact Damage in CFRP Composites

Deformation Analysis of Thermosetting FRP During Cure Process Using a Homogenization-Based FEA

Design for Manufacturing of Structures with Automated Fiber Placement via Integration of Analysis and Process Planning

Design of a Pultrusion System for Hemp-Based Rebar

Design of a Reduced Order Finite Element Model to Study the Effects of Microstructure Morphology on Composite Properties

Design of Flexible and Ultrasensitive 3D Printed Flexoelectric Sensor for Self-Powered Damage Detection of Composite Structures

Design Optimization and Analysis Validation of Complex Composite Parts Using Fiber Patch Placement

Detection and Intelligent In-Situ Self-Healing of Damage in Composite Structures

Detection and Localization of a Fold, Twist, and Overlaps Within Tow-Steered Composite Panels During Autoclave Cure

Detection of Microscopic Defects in CFRP Using X-Ray Talbot-Lau Interferometry

Determination of Mode I Interlaminar Fracture Energy and Cohesive Zone Modelling Parameters in Carbon/Epoxy Composites

Developing Continuum Damage Model Tensors for Ceramic Matrix Composites Using Genetic Programming Based Symbolic Regression

Development and Implementation of an Elasto-plastic, Failure and Fracture Model for Composite Materials

Development and Sheet Molding Compound (SMC) of Polydimethylsiloxane Composites for Thermal Insulation Applications

Development of a Combined Cohesive and Virtual Crack-Closure Technique Approach to Represent R-Curves

Development of a Higher-Level Building Block Testing Standard Using Seven Point Bend Configuration for Performance Evaluation at Scale

Development of Auxetic Composite Materials for Improved Impact Properties

Development of Data-Driven Surrogate Models for Rapid Simulation of Fibre Reinforced Composites in Progressive Fracture Tests

Development of Hierarchical Multifunctional Polymeric and Ceramic Nanocomposites

Digital Light Processing of Solvent-Free Graphite Nanoparticles and Edge-Oxidized Graphite Oxide-Acrylic Nanocomposites

Discerning Microstructure of CMC Minicomposites from Micro-CT Imaging Data Using Machine Learning

Does Micromechanics Work for Predicting the Transverse Tensile Strength of a Composite?

Dual-Cure Cladding Enabled Additive Manufacturing of Continuous Carbon Fiber/Epoxy Composites

Effect of Bi-Axial Tensile Loading on the Helium Gas Leakage Behavior of Thin-Ply CFRP Laminates

Effect of Edge Gluing on Failure Modes in Notched Cross-Laminated Timber Under Bending Loads

Effect of Environmental Aging on the Thermal and Chemical Properties of Flax Fiber-Polypropylene Natural Fiber Reinforced Thermoplastic Composites

Effect of Fiber Angle on the Radial Stress in Hybrid Aluminum/Composite Tubes

Effect of Fiber Clustering on Void Formation in Additive Manufacturing of Continuous Carbon Fiber Thermoset Composites

Effects of Embroidery Lock-Stitching on the Tension-Shear Mechanics of Textile Reinforcements

Effects of Repair Reinforcement on Scarf Joint Strength

Efficient Depolymerization of Amine-Cured Epoxy Composite and Recovery of Bisphenol-A by a NaOH_KOH Eutectic

Efficient Design of Laminate Composites Using Ensemble Kalman Inversion Method

Efficient Manufacturing of Carbon Fiber Reinforced EPON-Based Epoxy Resin Composites via Hot Press-Triggered Frontal Polymerization

Electrochemical Synthesis of Gold Nanoparticles-Biopolymer Nanocomposite to be Used as Biosensor Surfaces

Elucidating the Effect of Vertical Aligned Carbon Nanotubes on the Progressive Failure of Tow-Based Discontinuous Composites

Engineering Advanced Glass Fiber Reinforced-Shape Memory Composites Via Mechanochemistry and Transparent Conductive Oxides

Enhancement Method of the Paper Strengths by Infiltrating Photocurable Resin and Cellulose Nanofibers

Enhancement of Interlaminar Strength of 3D-Printed Carbon Fiber Reinforced Plastic by Layer-Wise Compaction

Enhancing Fracture Properties through Fiber Waviness Manufactured Using Tailored Fiber Placement

Enhancing Thermal and Mechanical Properties of Polypropylene Composites Using Agave Fibers: A Sustainable Approach for Green Composite Materials

Evaluating Process-Induced Residual Strains in Multi-Material Single-Lap Joints Using an Experimental Approach

Evaluation Marcelling in Composites Using Ultrasonic Guided Wave

Evaluation of Alumina Particle Reinforced Aluminum Matrix Composites Fabricated by Accumulative Roll Bonding Method

Evaluation of Interlaminar Fracture Toughness of Out of Plane Wrinkled Prepreg Woven CFRP Laminates

Evaluation of Low Viscosity Epoxy Repair Resins for Delamination Injection Repair

Evaluation on Fatigue Degradation and Residual Strength of Composite Pressure Vessel

Experiment and Simulation Study of Compression Behaviors of Beam and Honeycomb Lattices

Experimental and Numerical Investigation of Shear-Driven Fracture in Hybrid Tape/Fabric-Laminate End-Loaded-Split Specimens

Experimental Characterization of Mode II Traction-Separation Laws for Adhesively-Bonded Composites Using an End-Loaded Split Configuration

Experimental Setup for Mechanically Testing Subscale Triangular, Rollable, and Collapsible Deployable Composite Booms

Exploring 3D-Printed Ceramics: A Study in Nano-Reinforced Composites

Extrusion-Based Additive Manufacturing of Large Composite Structures for Aerospace Applications

Failure Mechanism and Energy Absorption Characteristics of Auxetic Pyrolytic Carbon Reinforcements Embedded in Different Matrix Materials

Failure Prediction of Fiber-Reinforced Polymer Composite Materials Using Data-Driven Modeling

Fatigue-Life Prediction and Design for Uncracked and Cracked Components: Determinstic, A- and B-Basis Probabilistic, or Reliabilty Target Approach

Fatigue Behavior of Additively Manufactured BN/PEEK/PEI Blended Composites

Fatigue Simulation for Damage Accumulation in Laminated Composites Using Microscopic Model and CZM-Based Extended Finite Element Method

Fiber Interface Modification via Aqueous Dispersion-Based Electrophoretic Deposition of High-Performance Thermoplastics and Resistive Joule Heating Process

Frontal-Polymerization-Based Manufacturing of Composite Panels: Effect of Reinforcement Geometry

Fused Deposition Modeling (FDM) of PolyEtherKetoneKetone (PEKK): Tailoring Tensile Strength via Process Parameter Optimization

Gamma-Ray Irradiation of CNT Yarns for Improved Composite Strength: A Molecular Dynamics Study

Gas Diffusion Nonwoven Carbon Paper for Fuel Cell with Controllable Contact Resistance and Hydrophobicity by Laser Engraving

Heat Damage Modeling and Simulation of Polymer Composite Structures

Heating of Thermoplastic Composite Tape Using Arc-Flash Lamp Used in Automated Fiber Placement Manufacturing

Hierarchical Multiscale Process Modeling of a Textile Composite Y-Joint for the Aurora D8 Aircraft

High-Fidelity Modeling of Bondline Failure in Polymeric Matrix Composites Considering the Effects of Manufacturing Defects

High-Throughput Test for Rare-Event Reliability Evaluation of 3D-Printed Composites

Hygroscopicity of 3D Printed Carbon Fiber Reinforced Polymeric Composites

Identification of Damage Parameters Under the Uneven Damage Development in Carbon Fiber Reinforced Plastic

Image-Based Failure Assessment of Li-Ion Batteries

Image-Based RKPM for Accessing Failure Mechanisms in Composite Materials

Impact Fatigue in Carbon Fiber Reinforced Composites

Implanted Sensor for the Monitoring of Temperature of Incoming Tape in Automated Fiber Placement of Thermoplastic Composites

Implementing Machine Learning Methodologies to Characterize Hidden Damages in Composite Plates Through Lamb Waves

Improved Deposition Rates in Additive Manufacturing of Commingled Tow-Based Continuous Fiber-Reinforced Composites via Alternating Tow Positioning

Improvement of Fatigue Life of Unidirectional Carbon Fiber Composite by Modification of Vinyl Ester Matrix with Rubber Particles Under Cryogenic Condition

Improving Composite Tailorability Through Architected Nacre Tablets

Improving Impact Toughness of Carbon Fiber Reinforced Composite Laminates Using Shear-Toughened Gel (STG): Mechanism and Performance Optimization

Improving Nondestructive Evaluation of Additively Manufactured Composites Using Ultrasound Data Fusion

Improving Shear Strength of Adhesively Bonded Joints by Out-of-Plane Compression for Composite Pressure Vessels

In-Plane Mechanical and Piezoresistive Properties of Unidirectional Multifunctional Composites

In-Situ Characterization of TuFF Composite Blanks in Diaphragm Forming

In-Situ Measurement of Damage Appearance and Growth During Ballistic Impact Tests on Composite Materials

Influence of Boundary Conditions and Crack Spacing in Simulation of Low Velocity Impact Response of Composite Laminated Plate

Influence of Fiber Aspect Ratio on the Mechanical Performance of Highly Aligned Short Fiber Composites

Influence of Shear on Crystallization Kinetics in Poly (Ether Ketone Ketone) Nanocomposites

Infrared Thermography Based Rapid Fatigue Characterization of Woven FRP Composites with Complex Geometry

Innovative Joining Method for Hybrid Composites with Tailored Performance

Integrated Process and Failure Analysis in Composites Using Multi-Fidelity Simulations and Machine Learning

Integrating Simulation and Machine Learning for Accelerated Analysis of Composite Curing

Interesting Properties of 3D Woven Composite Material Made with Different Bio-Sourced Yarns

Interfacial Polymerization: A Scalable Pathway for Nanocomposite Manufacturing

Interlaminar Fracture Toughness Evaluation of a Unidirectional Slit Tape Thermoplastic Composite

Interlaminar Shear Strength of Carbon/Epoxy Laminates Containing Magnetically Aligned Nickel-Coated, Diazotized Carbon Nanotubes

Investigating Effects of Oxidation of Graphene Quantum-Dot in Epoxy Composites – a Molecular Dynamics Study

Investigating the Low-Velocity Impact Resistance of Helicoidal and Double Double 3D Printed Carbon Fiber Reinforced Polymer Layups

Investigating the Significance of the R-Curve in Interlaminar Crack Growth of Composites Subjected to Fatigue Loading

Investigating Vacuum Bag-Only Consolidation of CF-PEEK Panels Made via Automated Fiber Placement

Investigation of Lamb Wave Characteristics in Composite Oriented Strand Board Plates

Investigation on Multifunctional Properties of Polyurethane/Halloysite Nanotube Nanocomposites via Fused Deposition Modelling

Joining and Other Unique Thermoplastic Challenges for Aircraft Applications

Lamellar Structure of High-Strength Direct-Spun CNT Yarns

Laser-Induced Graphene-Aramid Fabric Composite as Radar Absorbing Structure for Stealth Aircrafts

Leveraging Profilometry-Based Inspection Data to Capture Green-State Laminate Thickness of Automated Fiber Placement Structures

Localization of Impact Damage in Composite Material Subjected to Mechanical Loading Using Electrical Impedance Tomography

Longitudinal Debonding of Single-Fibre Composites Observed via In-Situ Synchrotron Computed Tomography at a 150 nm Resolution

Manufacturing Defects in Carbon Fiber-Reinforced Woven Composites Made of Repurposed Prepreg Scraps

Manufacturing of Scalable Hybrid Carbon Nanotube/Carbon Reinforced Polymer Composites

Material Hybridization for Tunable TPMS Metastructures

Matrix Crack Propagation Behavior of Cross-Ply CFRP Laminates at Cryogenic Temperature

Mechanical Behavior of MXene-Polymer Layered Nanocomposite Using Computational Finite Element Analysis

Mechanical Behavior of Sustainable Woven Composites with Architected Tencel Fabric

Mechanical Properties and Durability of MXene Films for EMI Shielding

Mechanical Property and Thermal Stability Characterization of Additively Manufactured Chicken Feather Fiber/Polybutylene Succinate (PBS) Green Composites

Mechanical Recycling of 3D Printed Carbon Fiber Reinforced Composites for Increased Sustainability Through a Reduction of Waste Material

Micro-Computed Tomography to Characterize In Situ Control of Fiber Volume Fractions in Fused Filament Fabrication

Microplastics Recovering System Development: Phase 1 - Mechanical Characterization of Nanomembranes with Taylor Wettability

Microstructural Variability in Composite Pressure Vessels and its Effects on Mechanical Performance Studied by Computed Tomography

Microstructure and Manufacturing Process Impact on Effective Material Properties in Carbon/Ultra-High-Molecular-Weight-Polyethylene Nanocomposites

Mode-I Interlaminar Toughness of Prepreg Platelet Molded Composites

Modeling the Deformation and Failure of 3D Woven CNT Composites

Modeling the Microstructure-Dependent Elastic Modulus and Ionic Conductivity of Structural Battery Electrolyte for Low-Temperature Applications

Modeling the Polymerization and Pyrolysis of SMP10 via Reactive Molecular Dynamics

Modeling the Strain Softening Behavior of Aligned Discontinuous Fiber Prepreg During Thermoforming

Molecular Dynamics Approach to Process Modeling and Material Characterization of PAN-Based Carbon Fiber

Molecular Dynamics Investigation of Bonding Structure and Property Relationships at the Interface Between Cellulose Nanocrystals and Glass Fibers

Molecular Dynamics Prediction of Strain Rate-Induced Failure Mode Transitions in Crystalline Polyethylene

Multiphysics Simulations of CFRP Degradation in Fire

Multiscale Analysis of t=Thermal Barrier Coated CFRP Composites

Multiscale and Multifidelity Modeling of a 3D Woven Composite Thermal Protection System

Multiscale Modeling for Predicting Mechanical Properties of Open Hole Laminates in 3D-Printed Carbon-Fiber-Reinforced Thermoplastics

Multiscale Modeling to Analyze Failure of Welded Joint of Thermosetting Carbon-Fiber-Reinforced Composites

Nanomechanics of Plant Cell Wall for Bioinspired Composite Design

NASA’s Hi-Rate Composite Aircraft Manufacturing (HiCAM) Project

Non-Destructive Techniques for Characterization of Damage and Thermomechanical Signatures for Optimizing Composite Drilling

Nondestructive Inspection Method to Characterize Thermoset Prepreg Quality and the Effect of Material Process Conditions on Formability

Nondestructive Ultrasonic Testing of Aerospace Composite Parts via Efficient Inversion of Elastic Constants

Numerical Methodology for Wrinkling Prediction in Automated Fiber Placement

On the Applicability of Transverse Loading Experimental Method for Determining Tensile Strength of Single Carbon Fibers at Microscale Gage-Lengths

Optimal Design of Viscoelastic Laminated Sandwich Composite Structures Considering Thermally-Induced Deformation of Composite Skins Using Lamination Parameters

Optimization of Electromagnetic Induction Heating for Adhesive Bonding – A Computational Study on Induction Bonding Process

Optimized Design Workflow for Patient-Customized Composite Orthotics

Origami and Kirigami-Inspired Sandwich Panels for UAM Primary Structural Applications

Out-of-Plane Compression Behavior of the Carbon Fiber Reinforced Plastic for Composite Pressure Vessel

Oxidative Aging of Recyclable and Conventional Thermosets

Performance of Cross-Laminated-Timber Against Rolling Shear Failure due to Out-of-Plane Bending

Peridynamic Simulations of Damage Initiation and Propagation of Microstructural Experiments

Physics-Based Simulation of Bondline Thickness Evolution During the Cure Process

Piezoresistivity Analysis of Polymer Composite Piezoresistors and Validation via Monte Carlo Simulations

Plasma Treatment of Aramid, Glass, and Flax Fabrics to Increase the Mechanical Properties of FRP Composites

Plasma Treatment of Carbon Nanotube Composites for Aerospace Structures

Point Cloud Failure Criterion for Orthotropic Composite Materials

Post-Multiple-Impact Damage Characterization in CFRP Laminates Using X-Ray Micro-Computed Tomography

Predicting Effective Properties of Unidirectional Non-Crimp Fabric Composites with Manufacturing-Induced Defects Using a Multiscale ANN Model

Predicting Fracture Toughness in Polymer Nanocomposites Using Concurrently Coupled Atomistic-Continuum Simulations

Predicting Macroscopic Mechanical Properties of Fiber Reinforced Composites Based on Microscale Fiber Morphologies

Predicting the Compaction Response of a Plain Woven Textile Incorporating Fiber Entanglement

Preparing Lattice Structures Using Continuous Carbon Fibers and Thermoset Composites

Progressive Damage Analysis of CFRP Pressure Vessels with Dome/Cylinder Bonded Structure

Progressive Damage Analysis of Complex 3D Textile Based Composite Parts Using Discrete Damage Modeling and Independent Mesh Method

Qualification of Type VII Blast Media For Paint Removal on Thin Carbon Fiber/Fiberglass Epoxy Composites and Epoxy/Metal Mesh Lightning Protection Materials

Quantitative Analysis of Ultrasonic Guided Wave Interactions with Single-Mode Damage in Composite Laminates

Quantitative Comparison of Local Strain Data in Micromechanics Models and Experiments of Composite Micropillars

Quantum-Informed Reactive Molecular Dynamics for In Situ Polymerization of Nanocomposites

Quasi-Static Properties of 5320-1/IM7 12K Unidirectional Laminates Toughened with Vertically Aligned Carbon Nanotubes

Rapid Curing Isothermal Resins for Aerospace Applications

Rapid Process Modeling and Residual Stress Evaluation of 3D-Woven CNT/Epoxy Composites via Higher-Order FE Modeling

Recycled Poly(Ethylene Terephthalate) for a Circular Economy Approach: Case Study of a 3D Printed Wind Energy Generator

Reliability-Based Design and Certification of Hybrid Composites

Repairing of CFRP Composites Using UV-Induced Frontal Polymerization

Scalable Fabrication of Carbon Fiber-Based Cathode with Networked Heterostructures for Structural Energy Storage Composites

Self-Catalysed Frontal Polymerisation Enables Fast & Energy-Efficient Composite Manufacturing

Shear Connection Analysis in G-FRP Composite Beams: Experimental and FEM Study

Shell-Type Element for Composite Bonded Joint Design

Shrinkage Induced Distortions in Symmetric Laminates of Double Curvature

Simulating High Energy Dynamic Impact of IM7/PEKK Continuous Fiber Laminated Thermoplastic Composite Using Notched Coupon Experiments

Simulating the Crystal Growth of PPS Using Molecular Dynamic Methods

Simultaneous Multi-Layer Topology and Toolpath Optimization

Solving the Internal Strain Field in 3D Random Short Fiber Composites Using Known Surface Strains

Stability Analysis of Linked Tape Spring Shells with Steered Fiber Paths

Stack Drilling of Carbon Fiber Reinforced Polymer Laminate and Metals Stacks Using Friction Flow Drilling

Statistical Multiscale Progressive Failure Analysis of Unbalanced Plain Weave Composites

Stiffness and Strength Uncertainty Quantification for Fused Filament Fabricated Composites

Stochastic Non-Linear Buckling Analysis of Variable Angle Tow Composites

Strengthening Multifunctional Graphene Oxide Films with Carbon Nanofibers

Stress-Based Analysis Using an Extended Variational Approach for Composite Laminates with Alternating Material Properties In the Loading Direction

Structural Sizing of a 50-m-Tall Thermoplastic Composite Solar Array Truss Tower Structure for the Lunar South Pole

Synergistic Enhancement of Mechanical Properties in Flax Fibers by Supercritical Fluid and TiO2 Nanoparticles

Tension-Tension Fatigue Behavior of Carbon/Epoxy Composites with Carbon Nanotube Interlayers

Testing and Simulation of an Off-Axis Composite Micro-Pillar

The Effect of Various Processing Parameters on the Mechanical Properties of Doctor-Bladed Graphene Oxide Films

Theoretical Analysis of CFRP Composite Laminates Under Compression with Small Ply Angle Change Using Thin-Ply Composites

Thermal Modeling for Autoclave Curing of Composite Structures: From High-Fidelity Thermal CFD to Physics-Informed Machine Learning

Thermo-Mechanical Piezoresistive Behavior of UD Multifunctional Composite Laminates for Next Generation Aircraft Structures

Thermophysical and Thermomechanical Characterization of Thermoplastic Composites for Predicting Process-Induced Deformations

Three-Dimensional Structural Analysis of Shell Structures Using MSG Based Beam Model

Time-Frequency Analysis for Interlaminar Defect Characterization in Composite Plates Through Ultrasonic Guided Waves

Toward Realistic Simulation of Transient Events within an Efficient Workflow Using Implicit and Explicit Solvers: Application to Laminated Composite Materials

Transfer Learning for Multiscale Analysis: Modeling Delamination of Carbon-Reinforced Composite Material

Uncertainty Quantification in Advanced Aerospace Composite Manufacturing Through Stochastic Finite Element Analysis and Probabilistic Machine Learning

Understanding Fatigue Behavior of Additively Manufactured Compression Molded Short Fiber Reinforced Thermoplastics with Process Defects.

Understanding Strain Rates and Defects in Composite Energy Absorbers

Understanding the Loading Memory of Composites Using Ultrasonic Inspection

Unlocking Optimal Performance: Investigating Superior Strategies for Intermittent Fibre-Matrix Interface Enhancement

Unsupervised Learning of Damage Modes During Fatigue of Composites

Use of Convolutional Neural Networks for Microscale Simulations in Progressive Damage Analysis in Composites

Using Neural Network to Improve Failure Predictions

Utilizing Through Thickness Frontal Polymerization for Rapid and Continuous Lamination of Carbon Fiber Beams

Validating Coarse-Grained Models of Thermoplastics for Fusion Welding

Viscoelastic Behavior of Highly Aligned Discontinuous Fiber Thermoplastic Melts

Vitrimer-Based Recyclable Hydrogen Storage Vessels

Water Absorption Properties and Tensile Strength of Carbon Fibers/Polyamide 6 Composite Formed by Fused-Deposition-Modeling-Type 3D Printer

Wet Compression Molding of Biocomposites – A Case Study

Wing-Shaped Leading-Edge Stealth Composites Using an Over-Expanded Honeycomb Core and a Periodic Pattern Etched on Ni-Coated Glass Fabric for Lightning Strike Protection

Wrinkle Deformation of Curved Prepreg Slit-Tapes Tow-Steered Laminates During Automated Fiber Placement

Questions about ProgramMaster? Contact programming@programmaster.org