Aging Phenomena In A Compositionally Complex Two-Phase Low-Density Steel

Alloy design of low carbon low alloy carbide free bainitic-ferrite steel

Alloying Effects and Mechanical Behavior of FCC Multi-Principal Element Alloys Containing Sigma Precipitates

Analysis of self-healing behavior in Co-based superalloy by spontaneous segregation of B and Y during in-situ tensile test at elevated temperature

Analysis of the L12 to hP24 Phase Transformation behavior of a Co3Ti precipitate during High Temperature Tensile deformation of a Co-based superalloy system

Annealing behavior of additive manufactured 304L using in-situ EBSD

As-Cast Microstructure of the Ni-Based Superalloy Rene N5 Fabricated via Lost-Wax Casting

Characterization of a Duplex CrCoNiAl High-Entropy Alloy Produced by Directional Solidification with Different Cooling Rates

Characterization of Structure and Magnetic Properties of Fe-Co-Ni-Al-Cu-Ti High Entropy Alloys

Characterization of Structure and Mechanical Properties of Al-Co-Cr-Fe-Ni-(Nb-Ti) High Entropy Alloys

Characterizing the Phase Transformations in W0.125Mo0.375FeNi with Thermal Analysis

Complex Antiphase Boundaries As a Means to Two-phase Coexistence in Ordered Fe-Pd Alloys

Compositionally Optimising the Volumetric Contraction of the Liquid-To-Solid Phase Transformation in Multi-Component Alloys – the Minimisation of Solidification Shrinkage

Controlling intermetallic precipitation in Cu-Ti alloys to tune mechanical and electrical properties

Correlating the microstructure and deformation mechanisms in equiatomic refractory ternary alloy systems

Correlative microscopic analysis of B-alloyed Fe-Mn-Al-Ni-C high-specific strength steels

Crystal Structure Engineering of Mn/Co-rich Spinel in Mn-doped (Co,Cu,Mg,Ni,Zn)O

Decomposition of the B2 phase following isothermal annealing, and a study of the interface characteristics of the product phase in a high entropy alloy

Deformation and Strain Partitioning in a Double Soaked Medium Manganese Steel with Differing Martensite Fractions

Deformation induced transformation: Alloy Design with FCC-HCP-BCC Burgers Transformation Triangle as the framework

Development of a Novel Processing Technique for Cold-rolled 2014 Aluminum Alloys via Athermally-enhanced Electrical Annealing

Diffusional-displacive mixed-mode transformation from ferrite parent phase to form an intermetallic nanocomposite in a Fe-Mo alloy

Directed Energy Deposition of CoCrFeMnNi High Entropy Alloy: Influence of Process Parameters on Thermal Cycles and Microstructural Evolution

Discovery of new nano-scale metastable intermetallic phases in laser rapid solidified Aluminum-Germanium eutectic

Domain size control by spinodal decomposition in ferroelectrics

Effect of Co/Ni ratio on shape memory effect of the CrMnFeCoNi multi-component alloys

Effect of electrical resistance heating on recrystallization of cold-rolled low-carbon steel

Effect of pass rolling reduction on martensite variant, texture, and mechanical properties of hot-rolled Nb-V low carbon Steel

Effect of Si impurities on the microstructural development of a cast Al-Mg-Fe alloy

Effect of Zr addition on microstructural evolution and mechanical properties of deformed and annealed Cu-Fe alloys

Effect on the mechanical and microstructural properties of welding using different commercial E7018 electrodes via the SMAW process.

Effects of Chemistry, Precipitation, and Microcleanliness on The Structural Degradation of NiTiHf High-Temperature Shape Memory Alloys

Effects of Cooling Rate and Nitrogen Content on Morphologies and Precipitation of Widmanstätten Austenite in Welds of Duplex Stainless Steels

Effects of Current-Assisted Treatment on the Microstructure, Mechanical Property, and Corrosion Behavior of Cu-8 wt% Sn Alloys in a Chloride Environment

Effects of Rapid Thermal Processing Parameters on the Microstructural Evolution of 4140 Steel

Electro-recrystallization Behavior in Cold-rolled Nickel-chromium Alloys under Direct Current Stressing

Enhancement of tensile response in low-carbon cerium-modified steels through alloy chemistry tuning

Evaluation of austenite conditioning and decomposition in steels with laser ultrasonics

Evaluation of Phase Stability of Quasicrystals in Spark Plasma Sintered Al Alloy

Formation Behavior of Calcium Ferrite Containing TiO2 in Sintering of Iron Ore Fines

Healable Ti-6Al-4V base alloy with cyclability between stress-induced martensite transformation and thermally induced β transformation

In-phase/Out-of-phase thermo-mechanical loading in High Temperature Shape Memory Alloys

In-Situ Study of Bulk Hetero-Nanostructured Copper During Heating Using Mono- and Polychromatic Synchrotron X-ray Diffraction

Influence of Al2O3 on Crystallization Behavior of Mold Slag Film Based on Soret Effect

Influence of Alloy Composition on the Precipitate Evolution and Properties of 7xxx Aluminum Alloy during Magnetic Field Annealing

Influence of Ni on the austenitic deformation mechanism of model Fe-Cr-Ni alloys studied using in situ synchrotron X-ray diffraction, electron microscopy, density functional theory and thermodynamic linear-response theory

Influence of Si on solidification microstructure and mechanical properties of CrFeCoNi high entropy alloy

Integrated modeling of static recrystallization in Mg-Zn-Ca alloy using the PRISMS framework

Interrelationship of stress-induced martensitic transformation and pitting corrosion in iron-based shape memory alloys

Investigating appropriate heat treatments for laser powder bed fusion nickel alloy 718

Investigating atomic size misfit effects in refractory high-entropy alloys

Investigation of microstructural evolution and mechanical behaviour of low carbon ‘Nb’-added micro alloyed steel developed through quenching and partitioning method

Investigation on the NiTiCoHf Multicomponent shape memory alloys

Knowledge-Processing-Microstructure of Pure Fe Produced by Laser Powder Bed Fusion

Magnetic Field-Assisted Processing of Martensitic Steels

Mechanism behind the creation of ultrafine grains at machined surface of 0.45% carbon steel during high-speed turning process

Microgravity studies of peritectic coupled growth by using a transparent model alloy aboard the International Space Station

Microstructural characterization of Quenched and Partitioned Ductile Iron (Q&PDI)

Microstructural Coarsening of Cells, Dendrites, and Fibrous eutectic in Al-2Fe-1Ni Alloy

Microstructural evolution and phase transformations in Al-Cu Friction Stir Welding

Microstructural evolution in a new low-cost polycrystalline Ni-base superalloy for elevated temperature structural applications

Microstructural stability and phase transformations in 17-4PH stainless steel builds fabricated via laser powder bed fusion

Microstructure and Texture Formation in Inconel 718 Deposited by Induction-Heating-Assisted Laser-Directed Energy Deposition

Microstructure and texture of heavily cold-rolled and annealed Al-modified extremely low stacking fault energy Cr1.3Co1Fe1Mn1Ni0.7 high entropy alloy

Microstructure design in duplex stainless steels via additive manufacturing

Microstructure Evolution of Directionally Solidified Ni-Based Superalloy MAR-M247 Induced by Solution Heat-Treatment

Microstructure Modification of Cu-Al-Zn-Sn Alloys for Control Optical and Mechanical Properties

Microstructure of Repair Welding Technology of the Co-Based Superalloy X40

Microstructure Refinement during Hot Rolling of 0.3 CrMoV Steel: Role of Crystallographic Texture

Modeling the Effects of Initial Grain Size, Martensitic Transformation Induced Dynamic Grain Refinement, Phases, and Texture on Strength of a High Entropy Alloy Using Crystal Plasticity

Negative Strain Rate Sensitivity in Al0.3CoCrFeNi High Entropy Alloy during hot deformation

Novel Co-based Superalloys Strengthened via Local Phase Transformation at Microtwins and Stacking Faults

Novel lightweight CoCrNiAlSi medium-entropy alloys with high strength and ductility

On Dysprosium Utilisation in Multi-main-phase Nd‒Dy‒Fe‒B Magnets with Core‒Shell Microstructures

On the development of high-strength high-damping steels: A CALPHAD assisted alloy design study

On the effects of micro-scale concentration gradients on martensitic transformations in NiTi shape memory alloys

Perturbation Solutions of the Cahn Hilliard Equations

Phase-field modeling of nanotwins evolution and grain boundary interactions in Cu during annealing

Phase Equilibrium and New Solid Solutions in the Sc2O3-TiO2-Fe2O3 System at 1300 °C

Phase Field Study of Acicular Growth at Grain Boundaries: Effects of Interface Coherency

Phase Stability in Rene 125 Ni-Based Superalloy – Thermodynamic Predictions and Microstructure Observation

Phase Transformations and Microstructure Evolution in Additive Laser Powder Bed Fusion Processed and Heat-Treated Co-Cr-Mo Alloy

Phase Transformations in Metal Additive Manufacturing

Phase transformations in ultrafine-grained Ti15Mo alloy prepared by severe plastic deformation

Phenomenological Comparative Research for the Effect of Fluid Flow on Characteristics of Solidification Structure of Continuous Casting Billet

Prediction of Steel Plate Deformation Using Phase Transformation-Based Finite Element Analysis

Pressure-induced amorphous-amorphous transitions and crystallization in silicon studied by a machine-learned potential

Pressure-induced phase transformations of CdTe via metadynamics simulation

Quantifying the kinetics of defect phase transitions Through ultrafast calorimetry

Recent applications of PRISMS-PF for phase-field simulations of microstructure evolution

Resistivity and its temperature coefficient in Fe-Mn-Al-C-based alloy

Selective acceleration of carbide evolution kinetics on phase boundaries by electric current treatment

Semi In-Situ Observations on Stress-Induced Martensite in Metastable Beta Titanium Alloy

Shape memory effect in the CrFeCo and CrMnFeCoNi multi-component system

Solidification Microstructures in Mixtures of Superalloys 625 and 718

Solidification modelling and wetting of Al-Ce alloys and Composites

Strengthening superalloys via an extreme density of locally transformed stacking fault phases

Stress aging and microstructure characteristics of binary magnesium alloys

Structure-property relation of a beta Ti-11Nb-9Fe under varying heat treatment conditions

Study of Deformation Mechanism and Microstructural Evolution in a Dual-Precipitation Strengthened Novel CoCrNi Medium Entropy Alloy by Al and Nd Co-Doping

Study of Recrystallization behavior and Mechanical Properties-Crystallographic Texture Correlation in Hot/Cold Rolled and Annealed 6.8Al-Fe and 9.7Al-Fe (wt%) Ferritic Low-Density Steels

STUDY OF THE MARTENSITIC TRANSFORMATION BY DEFORMATION OF TRACTION IN THE STEELS AISI 304 THROUGH ELECTRICAL RESISTIVITY

Study on Banded Segregation of High-Strength Hot-Rolled Grade Steel and the "Void" Defect in Casting Slabs

Sustainable NiTi Shape Memory Metallurgy

Synchrotron X-ray diffraction monitoring of the microstructural evolution of a zirconium alloy during complex thermal cycles.

Tailoring Mechanical Properties of a Multi-Principle-Element Alloy by a Multi-Scale Approach

Tailoring the shape-memory and superelastic behaviors in NiTi with Nb inclusion with coherent and semi-coherent interfaces using MD simulations

Testing Compositionally Complex Alloys for Phase Stability in High Radiation Environments

The effect of copper content on high strength precipitation hardened aluminum alloys processed via Additive Friction Stir Deposition

The effect of Ti:Ta ratio on the microstructure and elemental phase partitioning in high Co-containing powder-processed polycrystalline Ni-based superalloys for turbine disc applications

The effects of Ta additions on the microstructure of HP-micro alloys for steam-methane reformer applications

The Influence of Stoichiometry on the Reaction Behavior of Ni/Al Reactive Multilayers

The role of mechanical loading in bcc-hcp phase transition tension-compression asymmetry and twin formation

Thermal Analysis of Austenite Decomposition in an Experimental UHSS Cr-Mo-V Steel

Thermal stability of a 2.2 Mn 5B pearlitic steel processed by high pressure torsion: a calorimetric study

Warm rolling for enhanced strength-ductility and yielding behavior in low-density, medium-Mn steels

ε-carbide Induced Fresh Martensite to Produce Dual Phase Microstructure in Low Carbon Steel

Questions about ProgramMaster? Contact programming@programmaster.org