ProgramMaster Logo
Conference Tools for 2025 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2025 TMS Annual Meeting & Exhibition
Symposium Scandium Extraction and Use in Aluminum Alloys
Presentation Title Precipitation Behaviour in Al-Cu-Li Alloys Containing Sc And Zr
Author(s) Lu Jiang, Katrin Mester, Timothy James Langan, Matthew Robert Barnett, Thomas Dorin
On-Site Speaker (Planned) Lu Jiang
Abstract Scope In this work, the precipitation behaviour of Al-Cu-Li alloys with and without Sc and Zr during ageing at 160°C has been investigated. Scanning transmission electron microscopy (STEM) was used to characterise the formation of precipitates during the ageing treatment. The STEM results show that θ^' (Al2Cu) precipitates form at the early stage of ageing in both alloys, with T1 (Al2CuLi) precipitates forming gradually with ageing time. In the alloy with Sc and Zr, the θ^' and T1 precipitates are finer and denser. High-resolution TEM reveals that this is attributed to the formation of Al3(Sc, Zr) dispersoids in the Sc and Zr containing alloy. These Al3(Sc, Zr) dispersoids act as heterogeneous nucleation sites for the precipitation of θ^' and T1. Atom probe tomography (APT) was carried out to analyse the compositions of θ^' and T1. The strengthening contributions from Al3(Sc, Zr) dispersoids, θ^' and T1 are discussed.
Proceedings Inclusion? Planned: Light Metals

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Effect of Thermomechanical Processing on Microstructure and Properties of Sc/Zr-Containing AA5083 Rolled Alloys
Examination of Intermetallic Phases in Al-Fe-Ni Alloys with Scandium
L12-Strengthened Aluminum Alloys for Conventional and Additive Manufacturing
Optimizing Al-Mg-Sc-Zr Alloys for Additive Friction Stir Deposition
Precipitation Behaviour in Al-Cu-Li Alloys Containing Sc And Zr
Scandium in the Additive Manufacturing of In-Situ TiB2 and TiC Particle Reinforced Aluminum Alloy Composites for Improved Mechanical Properties
Study of Precipitates Formed during Solidification and Post-Solidification Stage in Low-Sc Al-Mg-Sc Alloys
The Effect of Sc and Zr Dispersoids on the Final Properties of a 6xxx Series Extrusion Alloy

Questions about ProgramMaster? Contact programming@programmaster.org