 3D-Printing by Patterning and Advancing a Liquid Photo-Polymer Film |
| 3D Printed Cellular Structures for Sound Absorption Applications |
| 3D Printing Tris 2-Isocyanurate Triacrylate with Cyanate Ester Resins for Interpenetrating Networks to Enhance Thermo-mechanical Properties |
| 4D Printed Actuation with Spatially-varying Lattices |
| A Data Analytics Approach to Fatigue Crack Initiation Site Prediction in Cellular Materials Using Thermography |
| A Data Based Approach to Fault Detection and Part Qualification in Wire-arc Additive Manufacturing |
| A Design and Additive Manufacturing Framework for Voxel-based, Multi-material, Thick-folding Origami |
| A Digital Exploration of the Mechanical Property Space of Self-stabilizing Dynamic Printable Foams |
| A Fast Data-driven Residual Stress Prediction for Laser Powder Bed Fusion Additive Manufacturing Based on the Modified Inherent Strain Method |
| A Fast Data-driven Residual Stress Prediction for Laser Powder Bed Fusion Additive Manufacturing Based on the Modified Inherent Strain Method |
| A Hybrid Aerosol Jet, Ultrasonic Spray, and Electrodeposition Approach for Additively Manufacturing Multi-layer Transformers on Magnetic Substrates |
| A Mechanical Test Artifact for Determining Relative As-built Fracture Toughness in Laser Powder Bed Fusion |
| A Novel Metal Deposition Technique for Embedding Fiber Optic Sensors in Metal Components |
| A Novel Surrogate Model for Scanwise Detailed Process Simulations in Large-scale LPBF Processes |
| A Post Processing Technique to Achieve Nanofinishing and Biocompatibility Enhancement of
Ti-6Al-4V Femoral Head Fabricated by Laser Powder Bed Fusion |
| A Print-planning Technique Using Edge-weights to Align Toolpaths to Vector Fields |
| A Real-Time Monitoring Framework for Cooperative 3D Printing |
| A Review of the Ceramic Reinforced Ni-based Superalloys |
| A Surrogate Model for Capturing the Relationship between Physics-based Process Model Parameters and Interpass Temperature History in Laser Powder Bed Fusion Parts |
| A Three-dimensional Semi-analytical Thermo-elastic-plastic Model for Real-time In-situ Prediction of Residual Stress in Laser Powder Bed Fusion |
| Accurate In-situ Detection of Localized Porosity in LPBF Using Infrared Camera |
| Achieving Consistent Microstructure through Feedforward Temperature Control in Laser Powder Bed Fusion |
| Adapting Sheet Lamination for Automated Fabrication of Origami-inspired Deployable Mechanisms |
| Additive Manufacturing Beyond the Gaussian Beam: Insights from Microstructure-based Modeling Studies |
| Additive Manufacturing Can Help Answer Structure-function Questions in Biology |
| Additive Manufacturing of a Deployable Monolithic Camera Cover for Planetary Exploration |
| Additive Manufacturing of Carbon Nanotubes Infused Multi-materials and their Mechanical Characterization |
| Additive Manufacturing of Conformal Carbon Fiber Composite Skins On Non-planar Surfaces |
| Additive Manufacturing of Oxide and Non-oxide Ceramics for Functional and Structural Applications |
| Additive Manufacturing of Surface-based Structures for Studying Fluid Flow in Heat Sinks with High-Speed Imaging |
| Additive Manufacturing Thermoforming |
| Advanced Manufacturing of Structural Lithium-ion Batteries |
| Advanced Micro-fabrication for Radiative Property Characterization of Porous Packed Beds Using Two-photon Polymerization(TPP) Technique |
| Advancements in Modeling Techniques for High-rate Deposition in Metal Additive Manufacturing: A Review |
| Advancing Manufacturing Efficiency: Electroplating Nickel onto 3D-Printed Polymer |
| Aerosol Jet Printing and Characterization of Mechanical Strain Gauges |
| Algorithm to Generate Toolpaths for Printing on Non-developable Surfaces |
| Aluminum Wire Arc Additive Manufacturing Weld Parameters and Path Improvement |
| America's Additive Foundry Consortium: Enabling High Deposition Rate Metal Additive Manufacturing to Secure U.S. Supply of Tactical Alloys |
| AMUI: A Data-driven Additive Manufacturing User Interface for Process Optimization |
| An Acoustic-based Witness Coupon Methodology |
| An Automated Vat Photopolymerization Process for Composite Parts with Multiple Spatially Steered Continuous Fibers |
| An Evaluation of Interpass Temperature Control in Arc-DED for Distortion Mitigation using Finite Element Thermomechanical Modeling |
| An In-situ Eddy Current Diagnostic for Monitoring Sub-surface Temperature During Metal Additive Manufacturing |
| An Interpolative Slicing Algorithm for Continuously Graded Stiffness in Viscous Thread Printed Foams |
| An Investigation of Plastic Deformation of Periodic Cellular Structures Based on Analytical Modeling |
| Analytical Prediction of Texture of Multi-phase Material in Laser Powder Bed Fusion |
| Analytical prediction of texture of multi-phase materials in laser powder bed fusion |
| Application Driven: Process for Rapidly Fabricating Large 3D Printed Solid Parts |
| Application of Solid Freeform Fabrication for Manufacturing and Prototyping of a Reconfigurable CubeSat for Ease of Assembly, Testing and Experimentation |
| Application of Solid Freeform Fabrication for Using Low-Cost Reconfigurable Items to Develop Actively Steered Mobile Robot Platform to Experiment with Advanced Vision and ML Based Experiments |
| Applying Generative Deep Learning Models for Cost-Effective Monitoring and Simulation of LPBF Processes |
| Automated Design of Optimal Plate Lattice Structures Enabled by Machine Learning |
| Ballistic Performance Predictions of As-built Additively Manufactured Stainless Steel |
| Bead-weaved Layered Prints for Improved Interlayer Adhesion in Additive Manufacturing |
| Benchmarking the Current State of Lattice Design Software for Additive Manufacturing |
| Bi-material 3D-printing to Realize Highly Efficient Negative-stiffness Compliant Lattices |
| Blue Laser Powder-blown Directed Energy Deposition of Niobium |
| Capturing 3D Temperature and Strain Fields using OBR Based Sensing in Additively Manufactured Parts |
| Carbon Fiber Composite Plate Lattice Structures With Unbound Infill |
| Cellular Fluidics: Directing Flow of Liquids and Gases Using Lattices |
| Challenges in Additive Manufacturing and Characterization of DLP for Optical Applications |
| Characterization of 3D Printed and Wire Embedded Thermoplastic Composite Structures |
| Characterization of the Tensile Behavior of Single and Multi-strut Ti64 Fabricated via Laser Powder-bed Fusion |
| Characterizing a Laser-Based Glass to Metal Sealing Process |
| Characterizing the use of Low-cost Steelmaking Feedstocks for Refining ElectroSlag Additive Manufacturing (RESAM) |
| CIFEM: Elucidating the Role of Local Thermal Environment on Multi-Track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion |
| Co-bonded Continuous Carbon Fiber Thermoset Composite Coatings for Durable Additively Manufactured Thermoset-thermoplastic Composite Tooling |
| Comparative Analysis of Mechanical and Electrical Properties of 3D Printing Carbon
Nanotube-Reinforced Materials |
| Compression-twist Behavior of Additively Manufactured 3D Chiral Metamaterial |
| Compressive Strength of 3D Printed 17-4 PH Honeycomb Structure |
| Conceptual Design for 4D Additive Manufacturing |
| Confined Direct Two-phase Jet Impingement Cooling with Topology Optimized Surface Engineering and Phase Separation Using Additive Manufacturing |
| Confined Direct Two-phase Jet Impingement Cooling with Topology Optimized Surface Engineering and Phase Separation Using Additive Manufacturing |
| Conformal Metal Additive Manufacturing Via Multi-axis Molten Metal Jetting |
| Connecting Defect Formation to Manufacturing Parameters and Process Emissions in DED-Arc |
| Continuous Wire Embedded 3D Printed Sorbent Structures |
| Control of Selective Laser Flash Sintering of Ceramics Using an AC Electric Field |
| Controlled Distribution of Composition within Extrusions as Enabled by an Active-mixing Hotend |
| Controlling AM Microstructures through In-situ Laser Annealing and Rapid Post-processing Optimization |
| Controlling Multi-track Melt Pool Size Variation Based on Local Thermal Environment for Inconel 718 Laser Powder Bed Fusion via Data-driven Approaches |
| Correlating Layer-wise Laser Powder Bed Fusion Process Data |
| Correlation of Surface Topography with Fatigue Life and Failure Location in Additively Manufactured AlSi10Mg via Computed Tomography |
| Crack Growth and Fatigue-life Predictions for Ti-6Al-4V Fabricated via Laser Directed Energy Deposition |
| Criteria-based Evaluation of Multi-lattice Structure Design Methods |
| Custom Cathode Optimization for Electropolishing Additively Manufactured 316L Stainless Steel |
| Data Driven and High Fidelity Modeling Approaches to Advance Understanding and TRL Level of 3D Printing |
| Decision-Making Framework for Customized Additively-Manufactured Lower-Limb Prosthetics |
| Deep Learning Based Prediction of Thermal History During the Laser-based Powder Bed Fusion (PBF-LB) Additive Manufacturing Process |
| Defect-free Ceramic Hybrid-AM using Intelligent Layer Reworking |
| Demonstration of a Wire-arc DED Process Optimization Framework |
| Demonstration of Numerical Optimal Control for Multiple Fusion-based Additive Manufacturing Processes |
| Design and Additive Manufacturing Micro-lattice Structures for Mechanical Metamaterials |
| Design and Additive Manufacturing of Compliant Door-latch Mechanism Based on Reinforcement Learning |
| Design and Fabrication of a Micro-Nozzle for Aerosol Jet Printing |
| Design and Fabrication of a Multi-directional Aerial 3D Printer |
| Design and Fabrication of Multi-material Plate Lattice Structures Using Fused Filament Fabrication Technique |
| Design for Additive Manufacturing Considerations for Compliant Constant-Force Mechanisms |
| Design for Metal Powder Bed Fusion: Exploring Predicted Print Time and Cost Impacts of Lattice Structures
|
| Design Guidelines for Material Extrusion Based Additive Manufacturing: Generation of Rules for Ceramics and Comparison to Polymer Standards |
| Design Inputs for Fused Filament Fabricated Non-pneumatic Tires |
| Design of 3D Printed Concrete Structures and Their Resilience to High Energy Blast Loading |
| Design of a Convergent Electroslag Additive Manufacturing (ESAM) System |
| Design of a Heated Build Plate for Printing Refractory Alloys Using Powder Bed Fusion |
| Design of a Novel TZM Alloy Tool for use in the Additive Friction Stir Deposition of 7XXX Series Aluminum Alloys |
| Design of an Electromagnetic Tool Changer for use in Ceramic Hybrid Additive Manufacture |
| Design of Pneumatic Soft Actuators for Fabrication with High-viscosity Vat Photopolymerization |
| Design Strategies for a Wire Arc Additive Manufactured Hip Impeller Using a Multi-robot WAAM System |
| Design, 3D Printing and Experimental Analysis of Lattice-based Biodegradable Metal Implants for Bone Regeneration in Segmental Bone Defects |
| Detecting Residual Powder in Additively Manufactured Parts via Impedance Measurements |
| Detection of Humping and Porosity Flaws in Wire Arc Directed Energy Deposition Using In-situ Meltpool Imaging |
| Determination of Optimal Beam Shapes in Laser Powder Based Fusion of Metals
-Verification and Validation |
| Determining Grain Size and Hardness in Laser Powder Bed Fusion Materials from Simulated Cooling Rates via Thermal Process Simulation |
| Determining Grain Size and Hardness in Laser Powder Bed Fusion Materials from Simulated Cooling Rates via Thermal Process Simulation |
| Developing a Comprehensive Printability Window for Reliable Molten Metal Droplet-on-Demand Manufacturing |
| Developing a Practical In-situ AM Process Monitoring Framework to Reduce Qualification Burdens |
| Developing In-Situ Process Monitoring Capabilities for Material Extrusion Additive Manufacturing |
| Development and Characterization of Rigid Polyester Blends for 4D Printing |
| Development and Optimization of Additively Manufactured Inconel 718 Thin Walls Printed via Laser Powder Bed Fusion with a Roller Recoater and Fine Powder |
| Development of a Closed-Loop Control System for Contact Tip to Work Distance and Interpass Temperature in Wire Arc Additive Manufacturing of Architectural Facades |
| Development of a Geometrically Based Methodology for Local Process Control in Powder Bed Fusion |
| Development of a Large-scale Hybrid Manufacturing Platform for Advanced Toolpath and Parametric Control |
| Development of a Low-viscosity, UV-curable PDMS Formulation for Vat Photopolymerization |
| Development of a Powder Delivery Control Model for Precise Multimaterial Deposition via Laser Directed Energy Deposition |
| Development of a Testing Platform for High-viscosity Photopolymers |
| Development of an In-situ Laser Calibration Method for Multi-laser Powder Bed fusion Additive Manufacturing System |
| Development of an Open-source High-temperature FDM 3D Printer for High-performance Thermoplastic Materials |
| Development of Powder Density Control L-PBF Methods for Tungsten Powder |
| Development of Universal Gating System Tool for Sand Casting Industry |
| Differences in Post-processing Techniques |
| Digital Light Processing of Solid Polymer Electrolyte for Lithium-ion Batteries |
| Direct Writing of Cu Film on Flexible Substrate Under Ambient Environment |
| Directed Energy Deposition for Dispersion-strengthening of Alloys |
| Dissimilar Metal Bonding Using Molten Metal Jetting (MMJ) |
| Dual-laser L-PBF Microstructural Tuning via Physics-based Feedforward Control |
| Effect of Aging on the Mechanical Properties of Methacrylate 3D Printed Parts |
| Effect of Heat Treatment on the Micro-/Defect-structure and Mechanical Behavior of Additively Manufactured Alf357 Aluminum Alloy |
| Effect of Heat Treatment on the Micro-/Defect-structure and Tensile Behavior of Additively Manufactured A6061-RAM2 Aluminum Alloy |
| Effect of Laser Power on Mechanical Property of Additive Manufactured Ti6Al4V-W-TiC for Aerospace Application |
| Effect of Laser Scanning Speed and Power on the Underlying Microstructure of SS316L Manufactured Using Laser Powder Bed Fusion |
| Effect of Part Thermal History on Microstructural Evolution and Mechanical Properties in Stainless Steel 316L Laser Powder Bed Fusion |
| Effect of Particle Morphology on Thixotropicity of SiC Colloidal Gel for Direct-Write Additive Manufacturing |
| Effect of Pre- and Post-Contouring Strategies on the Sloped Downskin Surfaces of Laser Powder-Bed Fusion Parts. |
| Effect of Process Parameters on the Properties of IN718 Prepared by Laser Powder-Bed Fusion |
| Effect of Processing Conditions on the Background Signal in Acoustic Monitoring in Laser Powder Bed Fusion |
| Effect of Thermal History on the Crack Propagation Rates in PA and PA/CF Samples prepared via Material Extusion Additive Manufacturing |
| Effect of Two Different Point-Based Melt Scanning Strategies on the Microstructure of As-Built IN718 Parts Fabricated via EB-PBF System |
| Effects of Powder Characteristics of Different Alloy Powders on Part Quality in Area Printing® Additive Manufacturing |
| Effects of Process Parameters and Print Orientation on the Manufacturability and Fluid Wicking Performance of Additively Manufactured Inconel 718 Wicks For Heat Pipes |
| Effects of SiC Reinforced Particles on Melt Pool Dynamics and Porosity Formation in Directed Energy Deposition of SS 316L Metal Matrix Composites |
| Electroslag Additive Manufacturing (ESAM) of Inconel 625 |
| Elucidating Microstructural Evolution Mechanisms in Tungsten via Layerwise Rolling in Additive Manufacturing: An Integrated Simulation and Experimental Approach |
| Elucidating the Role of Local Thermal Environment on Multi-track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion via CIFEM |
| Embedding Sensor Components into Metal Parts via Additive Friction Stir Deposition |
| Enhanced Energy Absorption for Fiber Laser Powder Bed Fusion of Thermoplastic Polyurethane (TPU) |
| Enhancing Microstructure and Mechanical Properties of 7075 Aluminum Walls Using a Hybrid Wire-arc Directed Energy Deposition and Friction Stir Process |
| Enhancing Predictive Accuracy in Thermal Modeling of Refractory Alloys: A Bayesian Approach Integrating Analytical Models and Experimental Data |
| Enhancing Stability and Quality in Laser-wire Directed Energy Deposition Through Dual-control Algorithms |
| Enhancing Standards Education in Additive Manufacturing and Robotics: A Systematic Approach and Curriculum Integration |
| Enhancing Surface Quality in Powder Bed Fusion of 316SS via Shot Peening |
| Enhancing the Mechanical Properties of Additively Manufactured Carbon Nanotube Integrated Components: A Simulation-based Approach |
| Establishing a Crowdsourcing-based Data Collection Tool to Identify Sources of Build Failure in Novice AM Designs |
| Establishing a Pipeline for the Scanning, Editing, and Full-color Additive Manufacturing of Cadavers for Anatomy Training |
| Evaluating the Impact of Printing Technology and Parameters on the Accuracy of Canine Maxillectomy Cutting Guides Produced by Additive Manufacturing |
| Evaluation of In-situ Monitoring Data with Non-destructive Evaluation for Laser-wire DED Ti6Al4V |
| Evaluation of Sources and Effects of Process Dynamics in Directed Energy Deposition |
| Evaluation of the Effects of Machining Methods on Fatigue Life and Surface Quality of L-PBF Ti-6Al-4V Parts |
| Evolution of Porosity in Additively Manufactured Steel 316L Dog Bone Specimens Under Tension: X-Ray Computed Tomography Study |
| Experimental and Computational Investigation in the Resonant Vibration of 3D-printed PLA Thin Rectangular Plates |
| Experimental Characterization of Additively Manufactured Topologically Interlocked Tessellations |
| Experimental Characterization of the Compression-compression Fatigue Performance in Flexible 3D Printed Honeycombs |
| Experimental Insights into Dynamic Behaviour Composite Lattice Structures |
| Exploring Convergent Manufacturing Pathways For 316L Hot Isostatically Pressed Parts |
| Exploring Effects of Part Size for Laser Powder Bed Fusion Manufactured Bismuth Telluride using In-Situ Thermal Tomography |
| Exploring Machine Learning Classification of Porosity from Infrared Signatures During Laser-powder Bed Fusion |
| Exploring the Impact of Island Spot Scanning on Microstructural Texture in Ti-6Al-4V
Fabricated by Electron Beam Powder Bed Fusion |
| Exploring the Impact of Pre- and Post-heating on Residual Stresses in Laser-directed Energy Deposition: A Numerical Investigation |
| Exploring the Influence of Geometrical Features on Mechanical Property Variation in LPBF Parts Through Simulation |
| Exploring Toolpath Strategies in Wire-arc Directed Energy Deposition for Enhanced Material Properties in Inconel 625 |
| Exploring Trace Geometry on Angular Surfaces with Drone-based 3D Printing |
| Extending Beyond Gantry Direct Ink Write Printing Using Robotics |
| Extrapolation of Upskin and Downskin Surface Roughness Using 3D Simulated Data for Laser Powder-bed Fabrication of Ti64 |
| Fabrication of Elastomeric Shape-Stabilized Phase Change Materials through Vat Photopolymerization |
| Fabrication of Zr-Based Bulk Metallic Glass from Crystalline Foil Using Laser Foil Printing Process |
| Fatigue Performance of Fiberglass Reinforced 3D Printed Thermoplastic Materials for Wind Blade Internal Shell Structures |
| Feasibility Analyses of Distributed Digital Factories Integrating Additive and Subtractive Manufacturing: A Case Study |
| Feedforward Temperature Control in Laser Powder Bed Fusion to Reduce Build Failures and Achieve Consistent Microstructure |
| Finding a Middle Ground: Local Makerspaces as a Driver for the Circular Economy in Additive Manufacturing |
| Finite Element Analysis for Sintering of Binder-Jetted SS316L Parts |
| Four-Dimensional Printing of Reconfigurable and Programmable Polymer-Derived Ceramics |
| Fully Registered Overhang X4 Data from Additive Manufacturing Metrology Testbed (AMMT): Multi-Sensor Datasets Integration |
| Functional Gradients in the Ti-Ta-Nb System |
| Functional Nanomaterial Inks for 3D-Printed Electronics via a Scalable Continuous-Flow Synthesis Method |
| Functionally Graded Refractory High Entropy Alloys Fabricated with Directed Energy Deposition for Alloy Development |
| Functionally Graded Toolpaths: Dynamic Process Parameter Control with OpenVCAD |
| Fundamental Path Optimization Strategies for Extrusion-Based Additive Manufacturing |
| Further Developments of a Novel Low Cost Material Jetting Platform for 3D Printing |
| Fused Deposition Modeling Using Orthogonally Configured Cartesian Printheads |
| GAN-Based High-Throughput Single Track Characterization to Reduce Variability and Experimental Costs in Laser Powder Bed Fusion |
| Generative AI for AM Materials Optimization and Design |
| Generative Artificial Intelligence (GenAI) Prompt Engineering for Additive Manufacturing (AM) |
| Geometric Repeatability Study for Robotic WAAM of Aluminum |
| GMP300 - Influence of Process Parameters on Material Properties |
| Gradient Segmentation of In-Situ Infrared Images for Porosity Detection in Electron Beam Powder Bed Fusion |
| Granulation of Fine Eggshell Powder into Granules for Binder Jetting Additive Manufacturing of Carbon-Capture Components |
| Graph Methods for Alloy Informatics and Multi-Material Design |
| GRATER: The Graph Theory Based Slicer |
| Greyscale DLP-Engineered Spatiotemporal Hydrogel Scaffolds |
| High-Fidelity Modeling of Multi-Component/Material Additive Manufacturing with Chemical Reactions |
| High-Speed Imaging Investigation and Process Mapping of the Plume Behavior in Laser Powder Bed Fusion |
| High Deposition Rate Process Development for Wire-Arc Additive Manufacturing - 100lb/h |
| High Precision In-Situ Alignment Procedure in Dual Laser Powder Bed Fusion for Congruent Laser Operation |
| High Strength Magnesium Alloy Parts Fabricated by Laser-Foil-Printing Process |
| High Temperature 3D Printing of Polyamide Magnetic Composites |
| High Temperature Thermal Conductivity Measurement Using Two-Color Thermal Imaging |
| Highly Productive Multi-Material Laser Wire DED |
| Hot Isostatic Pressure Study of Microstructure on Electron Beam Melting Tungsten |
| Hybrid Additive Manufacturing of Technical Ceramics |
| Hybrid Directed Energy Deposition of Geometrically-Complex Pressure Vessels for Advanced HIP Canning and Digitally-Driven Powder Metallurgy |
| Hybrid LP-DED for Thin Components |
| Hybrid Manufacturing of Glass using Femtosecond Machining and Digital Glass Forming |
| Hydrogen Embrittlement Relaxation of Stainless Steel via Powder Metallurgy Manufacturing Technology |
| Identification and Reduction of Disturbance Factors in the Acoustic Process Monitoring of the PBF-LB for Quality Assurance |
| Impact of Weld-Bead Profile Approximations on Thermal Finite Element Analysis for Wire-Arc Directed Energy Deposition |
| Implementation of Tool Shifts for 410 NiMo Overhang Structures in Wire-Arc Additive Manufacturing (WAAM) |
| Improve Frames´ Crash-Worthiness with AlSi10Mg Reinforcement Structures by DED-LB/P |
| Improved Design of Wings Built with Material Extrusion |
| Improving Additive Manufacturing with AI-Powered Robots |
| Improving the Design for Additive Manufacturing Process with Design of Experiments to Characterize Geometry-Dependent Porosity and Surface Roughness |
| Improving the Mechanical Properties of Fused Deposition Modeling (FDM) 3D Printed Polypropylene/ Carbon Fiber Parts |
| In-Situ Laser Powder Bed Fusion: Real-Time Assessment of Residual Stress through Thermal Gradient Analysis |
| In-Situ Layer-Wise Generation of 3D Thermal Point Clouds for AM via Embedded 3D Scanning and Thermal Data Fusion |
| In-Situ Layer Temperature Monitoring Enabled by Machine Vision |
| In-Situ Melt Pool Monitoring to Optimize Laser Powder Bed Fusion of Scalmalloy® |
| In-Situ Photodiode Collection and Trends Across Feed Forward Parts |
| In-Situ Powder Assessment by Frequency-Domain Thermal Response |
| In-Situ Powder Assessment by Frequency-Domain Thermal Response
|
| In-Situ Print Layer Height Correction Framework for Wire Arc Additive Manufacturing |
| In-Situ Sensor Monitoring for Defect Prediction During Metal 3D-Printing of Aluminum Alloy Using Convolutional Neural Networks |
| In-Situ Ultra-Fast Laser Processing in LPBF for Surface Quality Improvement and Defect Removal |
| Industrial Targets for High Productivity AM, Progress and Next Steps |
| Influence of Interlayer Mechanical Work on Microstructure and Mechanical Performance of Super Duplex Stainless Steel Deposited Using Wire Direct Energy Deposition Process |
| Influence of Layer Pitch Expansion for PBF-LB/P Efficiency Improvement on Part Strength |
| Influence of Light Intensity and Exposure Time on Cure Depth and Overpolymerization in Ceramic Vat Photopolymerization |
| Influence of Novel Space Filling PBF-LB Scanning Strategies on Part Distortion and Density |
| Influence of Powder Particle Size Distributions on Surface Topography of Polymer Laser Powder Bed Fusion Parts |
| Influence of Scanning Strategy on the Microstructure and the Mechanical Properties of AlSi10Mg Parts Fabricated via LPBF |
| Influence of Testing Method on Fatigue Performance of PBF-LB 316L Stainless Steel with As-Built Surfaces |
| Influencing Residual Stress in PBF-LB/M Processes through In-Process Microstructure Assessment and Selective Laser Heat Treatment |
| Initial Layer Characterization for Multilayer Fluid Interface Supported Printing |
| Innovative Approaches to Fabricate Terahertz Optics with Additive Manufacturing: Manufacture and THz Characterisation of a Silica-Filled Photopolymer |
| Insights on Multi-Extrusion Filament Fabrication: Exploring the Impact of Seam Overlap and Ironing Process |
| Integrating Automated Assembly and 3D Printing for the Manufacture of Miniature Pipe Inspection Robots |
| Integrating In-Situ Sensing for Adaptive Control of Powder Deposition to Advance Remanufacturing Processes |
| Integrating Process Data in Motion for Additive Manufacturing Industrialization |
| Interlayer Fracture of Large Area Additive Manufactured Short Fiber Composites |
| Inverse Generation of Metamaterial using Graph Neural Network |
| Investigating Deviations from NAVSEA LPBF Qual-Cert Requirements on the Microstructure and Mechanical Properties of 316L Stainless Steel Components |
| Investigating the Effect of Workpiece Shape on Thermal History and Coating Properties in High-Speed Coatings Using Laser Directed Energy Deposition |
| Investigating the Impact of Decontamination on Recycled Polymer Viability in Additive Manufacturing |
| Investigation of Process Parameters to Fabricate TiWMo Refractory Medium Entropy Alloy via Selective Laser Melting on Different Substrate Materials |
| Investigation of the Effective Anisotropy for the Triply Periodic Minimal Surface Lattice Under Varying Applied Stress Orientation |
| Iterative Learning for Efficient Additive Mass Production |
| Large-Scale, Conveyor Belt-Assisted Robotic Additive Manufacturing: System Design and Toolpath Planning |
| Laser-Powder Bed Fusion Processing Effects on Microstructural Texture in Nickel Superalloy |
| Laser Beam Sources and their Influence on Tailored Microstructure, Mechanical Properties, and Increased Productivity in Laser Powder Bed Fusion Additive Manufacturing |
| Laser Induced Breakdown Spectroscopy for Chemistry and Composition Monitoring of Laser Powder Bed Fusion Processing |
| Laser Powder Bed Fusion Copper: Post-Processing, Structure, Property Relationships |
| Laser Powder Bed Fusion of High-Strength Aluminum Matrix Composites |
| Laser Powder Bed Fusion of Nickel Aluminum Bronze in Nitrogen Environment |
| Laser Powder Bed Fusion Process Feedback Control based on In-Situ Powder Layer Thickness |
| Laser Speckle Photometry for Residual Stress Diagnosis of Laser Powder Bed Fusion Processing |
| Laser Tempering for Hybrid Additive Manufacturing |
| Lights-Out Hybrid Additive-Subtractive Manufacturing of Ti-6Al-4V Using Laser Powder Bed Fusion |
| Local Microstructural Control with Synchronized Dual Laser Scan Strategies: Fantasy or Reality? |
| Local Porosity Detection in LPBF Manufactured Aluminum Parts by In-Situ Multi-Sensor Monitoring |
| Location-Specific Engineered Microstructure Using Interpenetrating Lattices in Laser Powder-Bed Fusion |
| Low-Cost Calibration Plate for Enhanced In-Situ Monitoring in Laser-Powder Bed Fusion (L-PBF) |
| Low-Cost Melt Pool Monitoring in Wire Arc Additive Manufacturing |
| Machine-Learning Assisted Prediction of Surface Roughness in Powder Bed Fusion Process with Inconel Super Alloy |
| Machine Design and Process Development of Volumetric Polymer Powder Bed Fusion by Radio Frequency Additive Manufacturing (RFAM) |
| Machining PBF-L SMAs to Improve Geometrical Accuracy and Surface Quality |
| Magnetic Properties of Binder-Jetted Soft Magnetic Toroidal Inductor |
| Manuscript Test Abstract |
| Material Extrusion Additive Manufacturing Molds for Thermoset Composites |
| Measurement and Control in Digital Glass Forming (DGF) |
| Measurement Apparatus for Determining the Reflected, Absorbed, and Transmitted Energy during a Low Strain Rate Impact Event |
| Measuring Temperature during AC Selective Laser Flash Sintering |
| Measuring Thermomechanical Response of Large-Format Printed Polymer Composite Structures via Digital Image Correlation |
| Mechanical and corrosion properties of stainless steel fabricated by wire arc additive manufacturing (WAAM) using weave and stringer beads |
| Mechanical Performance of Lattice Structures Fabricated via Burst-Mode Drop-on-Demand Molten Metal Jetting (DoD MMJ) |
| Melt Pool Depth Contour Prediction from Surface Thermal Images with Transformer Models |
| Melt Pool Temperature Measurement Across Multiple Metal AM Processes through Application of Two-Color Thermal Imaging |
| Melt Track Formation Process with a Constant Linear Energy Density in Laser Powder Bed Fusion Revealed by In-situ X-Ray Imaging and Temperature Measurement |
| Microstructural and Mechanical Heterogeneity Observed in Additive Friction Stir Deposition Ti-6Al-4V |
| Microstructure-Informed Thermal-Mechanical Simulation of Multi-Bead Structures for Large Area Additive Manufacturing Polymer Composite Extrusion/Deposition |
| Microstructure and Crack Propagation in IN718 Samples Fabricated by Laser Powder-Bed Fusion |
| Microstructure Prediction in Laser Powder Bed Fusion using Heterogeneous Sensing, Process Modeling, and Machine Learning |
| Minimizing Drying Defects for Large-Scale Parts Fabricated by Ceramic On-Demand Extrusion |
| Minimizing Large Distortions in Binder Jetted Parts via Accurate Modeling and Compensation |
| Mitigating Distortion Challenges in Additively Manufactured Metallic Parts |
| Mitigating Overspray in Aerosol Jet Printing: A Deep Learning Approach for Process Optimization |
| Mixed Polymer Blend Composites Reinforced with Graphene Oxide for 3D Printing |
| Model-Based Production Operational Control for Metal Additive Manufacturing |
| Model Based Control of Fused Powder 3D Printing |
| Modeling of Laser Stirring Scan Strategy in LPBF for High-Throughput Applications |
| Modeling the Effect of Thermal Contact Resistance on Mechanical Properties in Fused Filament Fabrication |
| Mold Design using Binder-Jetted Sand for Aluminum Casting |
| Molten Metal Jetting for Repairing Aluminum Components |
| Molten Metal Jetting of Copper and Silver Electronic Traces |
| Molten Metal Jetting (MMJ) A356 and 6061 Heat Treatment, Tensile Properties, and Fracture |
| Monolithic Glass Forming using Laser Heated Sculpting |
| More Efficient Lattice Testing using an Optimal Design of Experiments Approach |
| Multi-Axis Routing of Syringe Deposited Conductive Traces over Topology-Optimized Multi-functional Structures |
| Multi-Axis Wire-Arc Directed Energy Deposition of a Topology Optimized Aircraft Component |
| Multi-Laser Powder Bed Fusion of Cu10Sn Using Low-Power 450nm Diode Lasers |
| Multi-Layer Temperature History Prediction During DED Process with Physics-Informed Neural Network |
| Multi-Material Integration in Laser Powder Bed Fusion |
| Multi-Nozzle Cooperation for Micro-Cold Spray |
| Multi-Scale Defect Monitoring in Laser Powder Bed Fusion Using Acoustic Emission Sensing |
| Multimodal Federated Product-of-Experts for Collaborative Fatigue Life Prediction in Additive Manufacturing |
| Networking and Cybersecurity Enabled Distributed Additive Manufacturing for Production of Critical Components at the Destination |
| Non-Invasive Measurement of SS304L Powder Bed Density via Flash Thermography |
| Nondestructive Fatigue Life Prediction for Additively Manufactured Parts through a Multimodal Transfer Learning Framework |
| Nontraditional Electromagnetics: Fabricating RF Sensitive Sensors, Circuits, and Interconnects using Additive Materials and Techniques |
| Novel Approach to Manufacture Soft Magnetic Core with MIM (Metal-Insulation-metal) Structure
via Dual-Nozzle Material Extrusion (MEX) Technology |
| Novel FFF Processes for Fiber-Enabled Designs |
| Novel Metal Additive Manufacturing using Innovative Polymer-Metal Composite: In-situ Monitoring, Microstructure and Mechanical Analyses |
| Numerical and Experimental Advances In Piston-Actuated Molten Metal Droplet Jetting |
| Numerical Simulations and Experimental Validation of Laser-Foil-Printing Additive Manufacturing |
| Numerical Simulations of Melt Pool Physics in Laser Powder Bed Fusion Processes |
| ODBP: Portable Post-Processing and Visualization of Abaqus FEA ODBs in Python 3 |
| On the Effectiveness of PBF-LB Particle Dampers with Thin and Flat Cavities Considering Industrial Process Variances |
| On the Nature of Recoater Damage Powder Spreading Mechanics |
| On the use of Event-based Change Detection Neuromorphic Imagers for In-Process Monitoring of Additive Manufacturing |
| Ontology-based Retrieval Augmented Generation (RAG) for GenAI-Supported Additive Manufacturing |
| Optical Expansion of Projection-based 3D Printing |
| Optical Tomography based on Near Infrared Imaging for Spatter and Distortion Detection in LPBF |
| Optimal Silane Concentration for Strengthening PA12 and SFO Composite Filaments in FDM Printing: Preliminary Insights |
| Optimization of SiC Colloidal Ink for Direct-Write Additive Manufacturing via Dual-Polyelectrolyte Ratio Method |
| Optimizing Molten Metal Deposition (MMD) for Aluminum Alloys: A Synergetic Approach of Finite Element and Experimental Study |
| Overcoming the Resolution-Deposition Limit of Additive Manufacturing with Droplet-on-Demand Molten Metal Jetting |
| Overview of Key Technoeconomic Performance Metrics for Large-Format Directed Energy Deposition Metal Additive Manufacturing |
| Parametric Investigation of Single-Layer Stainless Steel 316L with Novel Laser Powder Bed Fusion
Technology: Diode Area Melting with 450 nm Blue Lasers
|
| Part-Level Heat Buildup Across Directed Energy Deposition Additive Manufacturing Processes |
| Part Deformation Constrained Multi-load Support Optimization for Laser Powder Bed Fusion |
| Passive Intensity Modulation Of Light In A Microscale Selective Laser Sintering System For Enhanced Part Uniformity |
| Performance Analysis of Selective Separation Shaping (SSS) Large-Scale Powder Bonding Technology |
| Phase-field Simulations of Solute Element Segregations at Various Interfaces in Additively Manufactured IN718 Ni-based Superalloy |
| Photocurable SLA Resin Formulation for Reduced Thermal Expansion |
| Physics-based Machine Learning for In-Situ Infrared Detection of Micropores in LPBF |
| Physics-based Modeling of Polymer-Metal Composites in Fused Filament Fabrication |
| PLA-HA/BBG Composite Scaffolds Fabricated by Digital Light Processing 3D Printing for Cranial Bone RegenerationRegeneration |
| Planar and Non-planar Print Patterns in PEEK Flat Backup Rings to Increase Seal Performance Under High Pressure and Temperature |
| Powder Feed Mechanism for Convection of High-Cohesion, Sub-20-Micron Powders in Directed Energy Deposition |
| Powder Packing and Part Removal in Compressed Powder Beds |
| PowderJet: An Agile System for High Quality Metal Powder Production |
| Pre-training Vision Encoders with Thermal Images for In-situ Process Monitoring in Laser Powder Bed Fusion |
| Predictability of Drag force Towards Optimizing Fingers to Aid Automation in the Depowdering Stage of Binder Jet AM & Granular Physics |
| Predicting Melt Pool Thermal Distribution in Ti-6Al-4V Directed Energy Deposition Using Machine Learning |
| Predicting Microstructure Properties Using Transfer Learning |
| Predicting Print Morphology in Aerosol Jet Printing Using Deep Learning-based cGANs |
| Predicting Recoater Interference in Laser Powder Bed Fusion Process by Considering Both Global Thermal Deformation and Local Edge Deformation |
| Predicting Surface Roughness in Laser Powder Bed Fusion Parts after Laser Polishing: A Multi-Physics Simulation Approach |
| Predicting the Fatigue Life of a Multi-Jet Fusion Fabricated Polyamide 11 Ankle-foot Orthosis: Durability Insights from S-N Curve Analysis |
| Prediction of Fatigue Properties of Fiber-reinforced Composites Manufactured by Material Extrusion |
| Predictive Modeling of Clay Drying Process in Ceramic 3D Printing |
| Prewetting of Binder Jet Print Beds to Improve Line Quality and Expand Print Windows |
| Probing the Effect of Dislocation Cell on the Plasticity and Anisotropy of Additively Manufactured Copper via Crystal Plasticity Finite Element Modeling |
| Probing the Process Window Boundaries in Powder Bed Fusion-Laser Beam of Ti-6Al-4V |
| Process Development and Control for Sensor-informed Hybrid-Additive Manufacturing |
| Process Limitation for Powder Bed Fusion with Laser Beam Multiplication |
| Process Optimization of Diode Point Melting Using Ti6Al4V in Laser Powder Bed Fusion |
| Process Parameter Development for SS316L on the Freemelt-ONE Open Architecture Electron Beam Powder Bed Fusion Machine |
| Process Parameter Effects on the Mechanical Behavior and Microstructure of Fused Filament Fabricated 17-4 PH |
| Process Planning Toolbox for Cold Spray Additive Manufacturing Iterative Build Plan Optimization |
| Processing Aluminum Alloys with Piezoelectric Driven Molten Metal Jetting |
| Processing of Recycled PEKK-CF in Powder Bed Fusion |
| Proposal for How to Treat L-PBF Like Any Other Plant: State Feedback Control Design and Computational Issues |
| Pros and Cons of Industrial Robotics in Additive Manufacturing |
| Prospects of Fusion Additively Manufactured Microstructures for Enhancing Hydrogen Embrittlement Resistance |
| Quantification of Recoating Forces in Binder Jetting |
| Quantitative Analysis of In-situ Pore Removal in Porous L-PBF Substrates |
| Rapid 3D Printing of Electro-Active Hydrogels |
| Rapid Curing of Ceramic Binder Mixtures Using Microwave Radiation |
| Rapid Screening of Liquid Metal Wetting for a Materials Compatibility Library |
| Re-Defining Catheter Care with Multi-Material Additive Manufacturing |
| Re-Imagining Additive Manufacturing through Multi-Material Laser Powder Bed Fusion |
| Real-Time Process Visualization in Thermoplastic Extrusion with Augmented Reality Monitoring |
| Reconfigurable Lattice of Auxetic Backlash Structures for Shape-Changing Surfaces |
| Reduction of Aging Mechanisms in a Polyamide 66 Material for Use in the Laser-based Powder Bed Fusion Process |
| Region of Interest Analysis for Top Layer Quality Control in Thermoplastic Extrusion in Additive Manufacturing |
| Reinforcement Learning for Energy-Efficient Toolpath Generation in Additive Manufacturing |
| Research on Influence of Scan Strategy on Part Shrinkage in Low Temperature Laser Sintering of Polymer |
| Residual Stress Evaluation of EB-PBF Produced High Strength Mo-7Re-1HfC Alloy via Neutron Diffraction |
| Robotic Convergent Manufacturing of Large Format Structures |
| Shape Memory Alloy Enabled Interlocking Metasurfaces by L-PBF |
| Simulation and Estimation of Mechanical Properties of Additively Manufactured Metal Components |
| Size and Shape Optimisation for High-Performance Battery Electrodes |
| Size Effect on Porosity of Thin Struts Fabricated by Laser Powder-Bed Fusion (L-PBF) |
| Smooth 3D Transition Cell Generation based on Latent Space Arithmetic |
| Sol-Gel Synthesis Integrated 3D Printing of Lithium Nickel Cobalt Manganese Oxide |
| Solar Harvesting and Photothermal Energy Generation via Multiple Transparent Plasmonic Fe3O4@Cu2-xS Thin Films |
| Soldering and Electroplating to AM Surfaces |
| Spreadability of Raw Sand in Binder Jet Additive Manufacturing: Examining Feasibility Using Numerical Methods |
| Statistical Process Control for WAAM for Productivity and Quality Improvements |
| STEAM Powered: An Argument for the Robust Integration of Artistic and Engineering Practices in Design for Additive Manufacturing |
| Stop Building Naked Lattices! A (More Than) Modest Mechanical Property Improvement Strategy |
| Strategizing Scan Technique Selection for Component Remanufacturing Using 3D Printing: A Combined Reverse Engineering and TOPSIS Based Multi Criteria Decision Making Framework |
| Study of Additively Manufactured Tungsten and Tungsten alloys via Laser Based - Directed Energy Deposition Process for High Temperature Applications |
| Study of Using a Secondary Pulsed Laser for Process Control in Laser Powder Bed Fusion |
| Surface Roughness Measurements of Additively Manufactured Components via X-Ray Computed Tomography |
| Surface Roughness of the Micro Milled 3D Printed 316L Stainless Steel Parts Fabricated by FDM/ FFF Technology |
| Sustainable Waste Management In Additive Manufacturing: Old And New Strategies To Divert Industrial Waste From Landfills
|
| Symmetric Build Plate Deposition: A Strategy to Mitigate Solidification-Induced Residual Stresses in DED-Arc Additive Manufacturing |
| Synchrotron-based In Situ/Operando Characterization Capabilities at NSLS-II |
| Synergizing Machine Learning and Multiphysics Simulation for Spatter Process Map Generation in LPBF Processes |
| Temperature Control of Digital Glass Forming Processes |
| Tensile and Fatigue Analysis of Functionally Graded Materials with Varying Concentrations Manufactured Using Material Extrusion |
| The Behaviour of First-Generation Bio-Composites in a Multi-Axis Material Extrusion Application |
| The Development of a Precise Quick Response Apparatus for Functional Grading in Reactive Extrusion Additive Manufacturing |
| The Effects of Laser Absorption and Shielding in Plasma Vapor Jets Induced by Continuous Wave Laser Irradiation of Tungsten |
| The Effects of Multi-laser Process Parameters in LPBF Manufactured Inconel 718 |
| The Impact of Different HIP Treatment Cycles on Fatigue Behavior during 4-Point Bending of Additively Manufactured (AM) Ti-6Al-4V |
| The Influence of Contour Offset in Laser Powder Bed Fusion |
| Thermal-Assisted Direct Ink Write 3D Printing of Stainless Steel 316L Colloidal Pastes |
| Thermal and Mechanical Characterization of Lightweight PLA Filaments for Material Extrusion |
| Thermal Emission-Based Geometric Mapping of Specular Glass Surfaces |
| Thermographic Porosity Estimation by Monitoring Non-Uniformity of Intra-Layer Cooling During Hybrid Directed Energy Deposition |
| Titanium Wire Arc Additive Manufacturing Inert Enclosure and Material Handling Safety Considerations |
| Toolpath Planning for Additively Manufactured Continuous-Fiber Reinforced Composties Designed by Topology Optimization |
| Topology-Driven Information Embedding in Structural Components |
| Topology Optimisation of Bespoke Lattice Orthopaedic Implants |
| Topology Optimised Multi-Material MBB Beam Fabricated via Powder Bed Fusion |
| Toward In-Situ Sensing of Powder Packing Density In
metal Binder Jetting Using Recoating Force |
| Toward Parametric Heat Transfer Solvers in Additive Manufacturing |
| Toward Rapid Process Qualification of Laser Powder Bed Fusion Additive Manufacturing Using Physics-Based Model Predictive Control |
| Toward Real-Time Adaptive Material Control in Large-Scale Robotic Additive Manufacturing |
| Toward SmartScan 2.0 - An Intelligent Scanning Sequence Optimization Method for Reduced Part Deformation and Residual Stress in LPBF Based on Thermo-Mechanical Models |
| Towards Affordable Aluminum Additive Manufacturing: Considerations on the Manufacturing of Non-Explosible NExp-1 AlSi10Mg on Medium-Wattage Systems |
| Towards an Analytical Model for Multi-Objective Optimization of Cellular Materials |
| Towards Experimentally-Informed Modeling of Conduction for Improved Finite Element Thermal Prediction of Wire-Arc Directed Energy Deposition |
| Towards Freeform Additive Manufacturing: Recent Improvements Made on ORNL Large Scale Metal Slicer to Meet the Challenges brought by Growing Complexity of Parts in Wire-arc Additive Manufacturing |
| Towards High Resolution and High Speed Metal AM with Molten Metal Droplet Jetting |
| Towards Sustainable Fabrication of Electronics via Molten Metal Jetting |
| Towards Sustainable Rechargeable Batteries via Single Point Exposure Laser Powder Bed Fusion of Pure Zn Lattice Structures |
| Towards the Feasibility Analysis and Additive Manufacturing of a Novel Flexible Pedicle Screw for Spinal Fixation Procedures |
| Ultrasonic Vibration Augmented Fused Deposition Modeling through Step-wise Contour Scanning |
| Understanding Melt Pool Variation Due to Geometric Features and Scan Pathing |
| Understanding Melt Pool Variation Due to Geometric Features and Scan Pathing |
| Understanding Microstructure and Oxide Distribution in ODS Steels through Thermodynamic Simulations and Melt Pool Analysis in LPBF Processes |
| Understanding the Impact of Printing Strategies on Drop-on-Demand Molten Metal Jetting Technologies |
| Universal Differential Equations for Transient Thermal Modeling of Directed Energy Deposition Additive Manufacturing |
| Unsupervised Multi-Modal Machine Learning for In-Process Monitoring of Additive Manufacturing |
| Unveiling Gas–Liquid Metal Reactions in Metal Additive Manufacturing: High-Fidelity Modeling Validated with Experiments |
| Unveiling Spot Melting Strategies for Microstructure Control in Electron Beam Powder Bed Fusion |
| Upcycling Machining Chips for Additive Friction Stir Deposition Feedstock Production |
| Use of an Acousto-Optic Deflector Light Engine to Improve Resolution and Speed of the Stereolithography Process |
| Use of Cored Wire in the Optimisation of New Alloys for Laser Powder Bed Fusion with Tailored Mechanical and Corrosion Properties |
| Using Laser Ultrasonics to Measure Localized Changes in Young’s Modulus caused by Select Laser Flash Sintering |
| Using Trilinear Coordinate Measurements to Inform Prior Models for Minimally-Invasive Material Extrusion Path Planning |
| Variations Across Length Scales in Additively Manufactured Ti-
6Al-4V Parts: Challenges to Repeatability and Reproducibility |
| Vector-Level Feedforward Control of LPBF Melt Pool Area Using a Physics-based Thermal Model |
| Wire Arc Additive Manufacturing of Multi-material Parts Using H-13 Tool Steel |
| Wire Feed Speed Based Layer Height Controller for Wire Arc Additive Manufacturing |