| About this Abstract |
| Meeting |
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Symposium
|
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Presentation Title |
Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process |
| Author(s) |
Manfred Vogel, Robert Schulte, Onur Kaya, Marion Merklein |
| On-Site Speaker (Planned) |
Manfred Vogel |
| Abstract Scope |
Nowadays, the efficient production of complex functional components in short process chains is important due to the goal of a further reduction of greenhouse gases. Therefore, the new process class of sheet-bulk-metal forming was developed, which combines the advantages of sheet- and bulk forming operations. One approach is the application of a flexible rolling process for manufacturing tailored blanks to improve the components properties.
Heretofore, only geometries with a homogenous local material thickening were manufactured, to ensure a proper die filling of functional elements. In order to increase the intricacy, a new design that contains involute gearing cavities is introduced. In this paper the mild deep drawing steel DC04 with an initial sheet thickness of t0 = 2.0 mm is used to present new manufacturing approaches. Furthermore, the subsequent application of the tailored blanks in a calibration process is shown, with a characterization of the geometrical and mechanical properties. |
| Proceedings Inclusion? |
Definite: At-meeting proceedings |