A Mesoscale Modeling Approach to Predict Microstructural Evolution During Hypervelocity Impact of Aluminum

A Virtual Framework to Model the Microstructural Evolution in Laser-Direct-Drive Experiments

Acoustic Emission Testing During In-Situ Ion Irradiation

Advancing High-Temperature Image Analysis and Physical Property Measurements With Ultra-Violet Imaging

An Experimental Technique for Probing Cavitation Pressure in Soft Matter Under Azimuthal Shear

Automated DIC-Based Local Identification of Various Nanoscale Plastic Deformation Mechanisms in HCP

Billion-Cycle Fatigue Endurance Enabled via Grain Boundary Stabilization

Characterizing Phenomena in Metals and Alloys at the Single Defect Level

Contribution of Slip, Twinning and De-Twinning to the Mechanical Deformation of Haynes 244® Alloy at 23ºC and 650ºC

CRSS Determination in α-Ti: Modelling and In-Situ TEM study

Crystal Plasticity Experiments With Microstructure Clones

Data Acquisition and Modeling to Enable Microstructure Tailorability in Wire Arc Additive Manufacturing

Discrete Dislocation Dynamic Simulation of Shock-Induced Plasticity in Aluminum Motivated by Atomistic Data

Evaluating Phase-Field Simulations of Brittle Fracture in Polycrystalline Materials

Evaluation of the ΔT Creep Test as a Parallelized Test Method

Examination of Deformation Rate Effects Using Profilometry-Based Indentation Plastometry

Exploring Unusual Lüders Deformation in UFG high-Mn Austenitic Steel

Finite Element Modeling of Impacts for the Measurement of Material Properties

High Temperature Profilometry-Based Indentation Plastometry (HT-PIP) – Influence of Creep on Experimental Outcomes

Hydrogen Assisted Vacancy Production and Its Effects on Creep in Structural Steels

In-Situ Characterization Investigating Damage Propagation of SiC Composite Cladding

In-Situ Imaging of Spall Fracture

In-Situ Scanning Electron Microscopy Testing of Metallic Materials: New Methods & Insights

In-Situ TEM Study on Toughening Mechanisms in Metal-Graphene Nanolayered Composites

In Situ Digital Imaging Correlation Analysis of Ultrasonic Effects on Dynamic and Static Strain Aging

In Situ MicroCT Radiograph Corrections for Sub-Micron Scale Digital Volume Correlation

In Situ Nanomechanical Testing at Cryogenic Temperatures

Influence of Lattice Metamaterial Topology on Mechanical Response From Quasistatic to Shock Compaction Regimes

Influence of Mechanical, Thermal, and Corrosive Impacts on the Performance of Light Metal Structures and Biomaterials

Influence of Non-Uniaxial Bending on Twinning and Phase Transformation in Molybdenum Nanowires

Influence of Unimodal and Bimodal γ' Precipitate Size Distributions on the Deformation Mechanisms in ATI 718Plus

Interfacial Plasticity of Nano-Twinned Cu After Proton Irradiation

Investigation of Dislocation-Grain Boundary Interactions through In-Situ Direct Tensile Testing With High-Resolution Electron Backscatter Diffraction

Investigation of Size Effect in the Elastic Regime Through Micro-Scale Cantilever Bending Experiments

Kindling of Burning Particles to Metallic Substrates in High-Pressure Oxygen

Laboratory-Scale Simulation and Combined Modelling of Hot Multi-Directional Open-Die Forging and Cogging

Mapping Strain, Stress and Orientation in Metals in 3D

Microstructural Impact on Brittle Fracture Path Investigated via High-Energy Synchrotron Techniques

Microstructure and Mechanical Property Correlation of Multi-Component Materials Using the PI 89 Auto SEM PicoIndenter

Modeling Laser-Induced Microparticle Acceleration Using a Mesoscale-Continuum Approach

Nitrogen Hardening and Its Resistance to Aging in a Martensitic Nitrided Steel Investigated by High Speed Nanoindentation

Per-Grain Behaviour in a Duplex-Steel During Stress Induced Phase Transformations

Phase Field Microelasticity Theory and Modeling of Dislocation Dynamics in an Elastically and Structurally Inhomogeneous Solid

Phase Field Modeling of Slip Transfer in Thick Biphase Interfaces in HCP/BCC Nanolaminates

Programming the Crack Propagation and Toughness in Mechanical Metamaterials

Quantifying the Response of Metals at Elevated Temperatures and Strain Rates Above 106 s-1

Real-Time Sub-Microscopic Observation and Atomic Simulation of Deformation-Induced Martensitic Transformation at Grain Boundaries

Small-Scale Mechanical Testing of Material Properties Enabled by Site-Specific Femtosecond Laser Machining

Spatial and Temporal Deformation Behaviour of Hybrid Wrought – Additively Manufactured Inconel 718

Stochastic Direct Modeling of Mechanical and Thermal Properties of Polycrystals

Strain Rate Dependence of Activation Volume in Au Ultrafine Grained Thin Films Investigated by In Situ TEM

Strain Rate Sensitivity: A Comparative Analysis of Nanoindentation and Split Hopkinson Bar Measurement Techniques

Strength and Deformability in Nanolaminates Containing Thick 3D Interfaces

Superelastic Behavior in Shape Memory Alloys Studied by In-Situ SEM and TEM Nano-Compression and Nano-Tensile Tests

Tensile Deformation Behavior of Polycrystalline Pure Cobalt With HCP / FCC Dual Phase Studied by In-Situ X-Ray Diffraction

The Development of the Δσ Parallelized Creep Test

The Effect of β Phase Stability on the Cyclic Transformation Behaviour Metastable Ti Alloys

The Influence of Concurrent Structural Mechanics and Fluid Flow in Microstructure Solidification Modelling

The Role of Precipitates on Cyclic Stability of NiTi and NiTiCu Shape Memory Alloy Thin Films

Thermo-Mechanical Performance of Composite Metal Foams

Title: In-Situ Tribological Analysis of UHMWPE Ski Bases and Advanced Wax Formulations for Enhanced Glide Performance

Wear Mechanisms in Vacuum and Air: An In-Situ Comparative Study

Operando, Correlated Mechanical Microscopy of the Ni—Mo System

Questions about ProgramMaster? Contact programming@programmaster.org