A Comprehensive Review on Dynamic Mechanical Thermal Analysis of Polyester Reinforced Composites

A New Technology Innovation for Material Thermal Conductivity Measurements: Thermo-Optical Plane Source (TOPS)

Addition of Particulate Material From Sintering Plant to a Red Ceramics Mass

Advancing In-Situ Characterization and Processing With Raman Spectroscopy in Self-Driving Labs - Proof of Concept With Chocolate as Frugal Twin

Anodization Behavior of Additive Manufactured Aluminum Alloys

Atom Probe Tomography on a Novel Mg-Er Alloy

Characterization of Polymer Resin Composite With Fiberglass and Polycarbonate Microfibers for Applications in Small-Scale Boat Models

Characterizing Battery Materials With a New Mass Spectrometry Technique

Characterizing Microstructural Texture of Polycrystalline Materials Using Ultrasonic Scattering

Chemo-Mechanical Characterization of V2O5 Single Crystals Via Nanoindentation and In Situ Lithiation

Coal-Based Colloidal Composite Binder: Characterization of a New Efficient Binder for Iron Ore Agglomeration

Correlating Grain Boundary Character with Ionic Conductivity via EIS and 3D Diffraction Tomography

Correlative Transmission Electron Microscopy For In Situ Grain Growth Studies in Metallic Thin Films

Cu-Sn Anode Failure: Understanding the Mechanism From the Optical Approach

Deep Learning Based Reconstruction From Sparse 2D Projection Datasets for In Situ Tensile Experiments

Dendrite Growth Observation of the Ni-Based System Using In-Situ Synchrotron Imaging

Deployment and Testing of a Fiber-Based Instrument for In-Reactor Thermal Property Measurements at MIT Research Reactor

Developing In-Situ Diagnostics for Evaluation of Incipient Electrochemical Nucleation and Growth

Development and Characterization of an Ultrastrong Single-Phase High Entropy Alloy With Enhanced Ductility

Development of Axlebox Bearing Temperature Monitoring System to Ensure the Operation Safety of Railway Vehicle

Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel

Enabling Advances in Electron Backscatter Diffraction With Direct Electron Detectors (DED)

Enhancement Recovery of Fine Kaolin Particles by Microbubble Flotation

Estimation of Elastic Constants in Low Symmetry Materials With In-Situ Neutron Diffraction

Estimation of Online Homogenization of a Particle Mixture With Acoustic Emission

H-10: Characterization and Mechanical Analysis of Different Types of Biochar Incorporated Into Coating Mortar

H-11: Characterization of Feedstock and Recovered End-of-Life NdFeB Magnet Using X-Ray Absorption and Emission Spectroscopy

H-12: Characterization of Yellow and Red Clays and Bauxite Residue: Analysis of Properties and Potential for Ceramic Products

H-13: Contribution of Mineral Oil on Pore Stability of Alkali-Activated Composites for Co2 Capture

H-14: Critical Issues on Fly-Ash Alkali-Activated Using Hydroxide and Carbonate Sources

H-15: Durability Evaluation of Cement-Based Composites Reinforced With Guaruman Fibers

H-16: Effects of Red Mud on the Mechanical and Piezoresistive Properties of Mortars

H-17: Evaluation of Applicability of Natural Pineapple Leaf Fibers for Preparation of Coating Mortars

H-18: Evaluation of the Physical and Mechanical Properties of Extruded, Pressed, and Fired Red Ceramic Blocks

H-19: Experimental and Numerical Evaluation of Soil-Cement Blocks Under Simple Compression and Cyclic Shear Loads

H-20: Experimental and Numerical Modeling of Thermal Performance of Extruded, Pressed and Fired Ceramic Blocks

H-21: Feasibility of Incorporating Water Treatment Plant Sludge Into Ceramic Blocks

H-22: Influence of Marble Granulometry on the Hardened State Properties of Mortars

H-23: Investigation of the Potential Use of Spodumene in Sustainable Mortars

H-25: Mechanical Behavior Analysis of Cement Mortar in Hardened State With Substitution of Furniture Sawdust Residue (FSR)

H-26: Microstructural Characterization of Nitrided Low Alloy Steel Using EPMA Scatter Diagram Method

H-27: Physico-Chemical and Mineralogical Characterization of Soils for the Production of Extruded, Pressed, and Fired Red Ceramic Blocks

H-28: Production and Evaluation of Technological Properties of Artificial Agglomerated Rock With Black Rock Waste São Gabriel

H-29: Rheological and Mechanical Viability of Alkali-Activated Pastes for Oil Well Application

H-30: Soil Blocks Using Geopolymer and Partial Replacement of Soil With Construction Waste

H-31: Technological Properties of Soil-Cement Bricks Produced With Soils From the Red Ceramic Industry of Campos Dos Goytacazes

H-8: Activation of Granite Waste by Grinding for Applications as a Precursor In Geopolymers

H-9: Analysis of Accelerated Degradation in the Laboratory of Pressed Ceramic Blocks of Red Ceramic

High Energy Diffraction Microscopy as a Tool for In-Situ Characterization of Materials

High Purity Arsenic Trioxide Prepared From Arsenic Sulfide Residue With Reduction Method

Implementing Transmission X-Ray Microscopy at X-Ray Free Electron Lasers for In-Situ Studies of Laser Powder Bed Fusion

In-Situ Characterization Methods for Thermophysical Property Measurements Using the Electro-Magnetic Levitator On-Board the International Space Station

In-Situ Grain Growth Analysis With Quenching Dilatometry and Non-Destructive Laser Ultrasound

In-Situ Mechanical Property Measurement Using Laser Ultrasound

In-Situ Multi-Scale Analysis of Local Deformation Behavior of Lath Martensite in Low-Carbon-Steel

In-Situ Sensor Monitoring and Multiclass Porosity Defects Prediction for Laser Powder Bed Fusion With Machine Learning

Influence of Functional-Gradation on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Lattice Structures

Investigating the Tribological Behavior of Nitinol Alloys Manufactured via Mechanical Alloying for Hip Implant Applications

Investigation of Laves Phase Dissolution and Homogenization Kinetics in IN718 With Varying Si Content Through a Combination of Characterization and Calculation

Lattice Parameter Evolution During the β-to-α and β-to-ω Transformations of Iron and Aluminum Modified Ti-11Cr(at.%)

Leveraging XRD, Total Scattering, and XAFS Techniques to Decipher Structure-Property-Performance Relationships in Ammonia Decomposition Catalysts

Local Electrical Characterization of Grain and Phase Boundaries in Alloys

Low Voltage Electron Back-Scatter Diffraction: Enabling High Resolution Mapping of Early Stage Recrystallization

Micromechanical Investigation of Defects in Single Crystal Ni-Based Superalloys

Microstructural Evolution of Fe-Bearing Intermetallic Particle After Thermo-Mechanical Processing Using X-Ray Microcomputed Tomography

Modeling the Thermal Frequency Response of Printed Silver on Glass, Alumina, and Polyamide Substrates for Modulated Photothermal Radiometry

Multiscale Characterization and Experimentation to Analyze the Role of Ceramic Inoculants in the Failure Behavior of Aluminum Metal Matrix Composites

Novel Acoustic Characterization Techniques for Lithium-Ion Battery Materials

Novel In-Situ Characterization of Uranium Diboride via Thermal Imaging

Opening Pandora’s Box: Addressing the Closed Nature of Post-Processing Methods for Computed Tomography (CT) Images With Application Perspectives for Energetic Materials

Phase Evolution of a Spinodal Copper Alloy, Characterized by In Situ Synchrotron X Ray Diffraction

Physicochemical Characterization and Alkali Dissolution of Alluvial Fe-Columbite Deposit for Feasible Formation of Soluble Niobium and Tantalum Complexes

Preparation of Glass-Ceramics From Ferronickel Slag and Iron Ore Tailings: Effects of Crystallization Temperature and Time

Process Mineralogy of a Manganese–Silver Ore in Mexico

Put a Gleeble in the Beam: Concepts for the Materials Oscilloscope

Quantitative Analysis of Corrosion Products, Pores and Carbides on Uncoated Single Crystal RenéN5 Superalloy

Recent Progress in Microwave-Assisted Synthesis of Composites Based on Titanium Alloy and Hydroxyapatite at Central South University

Research and Application of O2-CO2 Mixed Blowing in Converter Steelmaking

Role of Biogas Recirculation in Direct Reduction of Iron Ore with Woody Biomass

Shock Compression Impact on Covalently-Bonded Materials

Simulation of Temperature Field of Water Cooling System in Nickel Flash Furnace Melting Process

Slag Characterization Techniques– Necessary Tool for Simulation of Refractory Corrosion

Structural and Dielectric Properties Analysis of Batio3 Doped Single and Double With Gadolinium and Europium

Structural Characterization of Tio2, Wo3, Zno and Sno2 for Modified Zinc - Titanium Dioxide Nanocomposites Smart Coatings

Study and Characterization of an Adsorbent Material Used in the Direct Extraction of Lithium

Study on the Influence of Utilization Ratio of Carbonaceous Particles Injection in BOF Steelmaking

Synthesis and Characterization of Conventional and Non-Conventional Adsorbent Materials

Synthesis and Characterization of Surfactant Modified Clays for Adsorption Applications

The Reaction Behavior and Removal Law of Alkali Metals in the Pellet Process of Belt Roaster

Thermodynamic Study of Waste Circuit Board Chlorination Treatment

Thermophysical Property Measurement of Rare Earth Titanates With Aerodynamic Levitation and Laser Heating

Uncovering Fast Thermal Effects in Metals by In-Situ MEMS Heating in SEM

Unraveling the Mystery of Helium as Environment Gas in 3D Printing of Metals

Questions about ProgramMaster? Contact programming@programmaster.org