About this Abstract |
| Meeting |
2025 TMS Annual Meeting & Exhibition
|
| Symposium
|
High Performance Steels
|
| Presentation Title |
Manufacturing of Advanced High Strength High Mn Steel |
| Author(s) |
José Eduardo Avalos Arcos, Nancy Margarita Lopez-Granados, Constantin Alberto Hernández-Bocanegra, José Angel Ramos-Banderas |
| On-Site Speaker (Planned) |
Nancy Margarita Lopez-Granados |
| Abstract Scope |
manufacturing a 0.13%C-18%Mn-2.72%Si-1.67%Al steel using an induction furnace starting from a 1018 commercial steel and hot and warm rolling resulting in tensile strength of 896 MPa with a ductility of 40 %. After this, a pair of normalizations were carried out at 700°C and 900°C for 150min, resulting in a tensile strength of 714 MPa and an elongation percentage of 63.84% and 900 MPa in combination with an elongation percentage greater than 70%. respectively, with an increase in grain size. |
| Proceedings Inclusion? |
Planned: |
| Keywords |
Mechanical Properties, Characterization, Composites |