| About this Abstract |
| Meeting |
2020 TMS Annual Meeting & Exhibition
|
| Symposium
|
Additive Manufacturing: Materials Design and Alloy Development II
|
| Presentation Title |
A-49 (Invited): Additions of Iron to Grain Refine Ti Alloys during Laser Powder Bed Fusion |
| Author(s) |
Marco Simonelli, Nesma T. Aboulkhair, Yau Yau Tse, Adam Thomas Clare, Richard Hague |
| On-Site Speaker (Planned) |
Marco Simonelli |
| Abstract Scope |
There remains a significant challenge in adapting alloys for metal based Additive Manufacturing (AM). Adjusting alloy composition to suit the process, particularly under regimes close to industrial practice, is therefore a potential solution. With the aim of designing new Ti-based alloys of superior mechanical properties for use in laser powder-bed fusion, this research investigates the influence of Fe on the microstructural development of Ti-6Al-4V. The operating mechanisms that govern the relationship between the alloy composition (and Fe in particular) and the grain size are explored using EBSD, TEM and in-situ high energy synchrotron X-ray diffraction. It was found that Fe additions up to 3wt% lead to a progressive refinement of the microstructure. By exploiting the cooling rates of AM and suitable amount of Fe additions, it was possible to obtain microstructures that can be optimized by heat treatment without obvious precipitation of detrimental brittle phases. The resulting microstructure consists of a desirable and well-studied fully laminar α+ β structure in refined prior-β grains. |
| Proceedings Inclusion? |
Planned: Supplemental Proceedings volume |