Analysis of In-situ X-ray Tomography Datasets of Dendritic Solidification Using 2D and 3D Machine Learning Algorithms

Assessing the Evolution of Pit Growth Kinetics during Atmospheric Corrosion Using In-situ X-ray Tomography

Ca2+ and pH Imaging during Dissolution of CaSiO3 into Aqueous Solution

Challenges for Quantitative High-temperature Confocal Scanning Laser Microscopy: Understanding the Temperature Profile

Determination of Strain Path Envelope in an Optimized Biaxial Cruciform Specimen of AISI 1008 Steel under Linear, Bilinear, and Nonlinear Strain Paths

Dissolution Behavior of Non-metallic Inclusions in Refining Slag Observed Using Confocal Scanning Laser Microscopes

Evaluation of Dynamic Wetting Properties of Si/C Interface

Evaluation of Interfacial Energy between Molten Fe- 18%Cr-9%Ni Alloy and Non-metallic Inclusion-type Oxides at 1873K

High Temperature In Situ Imaging and Strain Measurement during Synthesis of Monolithic Zirconium Hydride Components

In-operando Interactions of Refractory Materials with Ash/Slag from Mixed Feedstock Gasification

In-situ Observation of Phase Transformations in Co-based Dual Phase Entropic Alloys Using High Temperature Confocal Laser Scanning Microscopy

In-situ Observation of SO2 Gas Formation at the Magnetite/Matte Interface at 1200℃

In-situ X-ray Imaging of Melt Flow and Melt Pool Variation during Laser Metal Additive Manufacturing Process

In Situ Evidence of Dynamic Interactions between Droplets and Dendrites during Rapid Solidification of Immiscible Alloys

In Situ Observation and Investigation of the Wetting Behaviors of Mold Flux on Steel Substrate

Investigation of Echo Source and Signal Deterioration in Ultrasound Measurement of Metal Melt

L-1: Ultrasonic Doppler Velocimetry Technique for Investigation of Flows in Liquid Metal Batteries

Molten State Physical Properties of Divalent and Trivalent Alkaline Earth, Transition Metal, and Rare Earth Oxides

NOW ON-DEMAND ONLY - Evaluating Cellular-level Inhomogeneity through High-frequency Ultrasound -- A Computational Study

NOW ON-DEMAND ONLY - In-situ Investigation of Deformation Behavior of 5Mn Steel at Different Strain Rates by Digital Image Correlation

NOW ON DEMAND ONLY: In Situ Atomic Force Microscopy Evaluation of the Normal Pressure-dependent Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid

Phase Evolution in Water at High Pressures from XRD and Raman Spectroscopy: A Combined MD Simulation and Experimental Investigation

Pseudo-4D Characterization of Lamella Orientations in Locked Al-Al2Cu Eutectic Colonies

Real-time Deformation Mechanisms of Hierarchically Structured Nanocomposites Using High-resolution In Situ Testing

Real-time Optical Visualization of Battery Reactions and Processes

Real Time Observation of Reactive Spreading and Interfacial Reactions between Liquid AlNi Alloy and Solid Ni

Real Time Quantification of Nickel, Cobalt, and Manganese Concentration Using Ultraviolet-visible Spectroscopy -- A Feasibility Study

Simultaneous Extraction of Nickel and Vanadium from Petroleum Byproducts

Tension Compression Asymmetry and Plastic Anisotropy in Mg Single Crystal Response Evaluated Using Micromechanical Tests

Three-dimensional Time Evolution Behavior of Short Fatigue Crack Morphology and Crack Closure in Ti-6Al-4V Alloy Assessed Using High-energy Imaging Type CT

Two-color Pyrometry as a Defect Predictor in the Additive Manufacturing of 316L Stainless Steel

Ultrafast Real-time Imaging and Modelling of the Dynamics of Fatigue Liquid Exfoliation of 2D Graphite under Ultrasound

Understanding Deformation at the Nanoscale via In Situ SEM Mechanical Testing

Visualizing the Path of Corroding Mg Alloys Using High Phase Contrast X-ray Computed Tomography

Questions about ProgramMaster? Contact programming@programmaster.org