A Blue Ocean Analysis for Titica Vine Composite in Epoxy Matrix for Civil Construction Applications as Thermal and Acoustic Insulation

A Comprehensive Review on Dynamic Mechanical Thermal Analysis of Polyester Reinforced Composites

A New Technology Innovation for Material Thermal Conductivity Measurements: Thermo-Optical Plane Source (TOPS)

Activation of Granite Waste by Grinding for Applications as a Precursor In Geopolymers

Addition of Particulate Material From Sintering Plant to a Red Ceramics Mass

Advancing Eddy Current Tomography for Conductive Samples

Advancing In-Situ Characterization and Processing With Raman Spectroscopy in Self-Driving Labs - Proof of Concept With Chocolate as Frugal Twin

Analysis of Accelerated Degradation in the Laboratory of Pressed Ceramic Blocks of Red Ceramic

Analysis of Pyrite Depression During Flotation in the Presence of Organic Reagents

Analysis of the Flotation Behavior of Copper Oxides Using Amyl Xanthate as Collector

Anodization Behavior of Additive Manufactured Aluminum Alloys

Application of Irradiated Lignin and Rice Husk Ash as Green Sustainable Fillers for Biocomposites

Application of the Operation Curve Optimization Model in Consteel Electric Arc Furnace

Association Rules Mining for Oxygen Consumption Reduction in Basic Oxygen Furnace Steelmaking Process

Atom Probe Tomography on a Novel Mg-Er Alloy

Behavior of Collectorless Flotation Pyrite in the Presence of Tannic Acid

Characterization and Mechanical Analysis of Different Types of Biochar Incorporated Into Coating Mortar

Characterization of Feedstock and Recovered End-of-Life NdFeB Magnet Using X-Ray Absorption and Emission Spectroscopy

Characterization of Polymer Resin Composite With Fiberglass and Polycarbonate Microfibers for Applications in Small-Scale Boat Models

Characterization of the Flotation of Malachite, Azurite and Tenorite Using Dodecylamine

Characterization of Yellow and Red Clays and Bauxite Residue: Analysis of Properties and Potential for Ceramic Products

Characterizing Battery Materials With a New Mass Spectrometry Technique

Characterizing Microstructural Texture of Polycrystalline Materials Using Ultrasonic Scattering

Chemo-Mechanical Characterization of V2O5 Single Crystals Via Nanoindentation and In Situ Lithiation

Coal-Based Colloidal Composite Binder: Characterization of a New Efficient Binder for Iron Ore Agglomeration

Comparative Analysis of Natural Pineapple Leaf Fibers and Treated With Vegetable Polyphenol in Coating Mortars

Contribution of Mineral Oil on Pore Stability of Alkali-Activated Composites for Co2 Capture

Correlating Grain Boundary Character With Ionic Conductivity via EIS and 3D Diffraction Tomography

Correlative Transmission Electron Microscopy For In Situ Grain Growth Studies in Metallic Thin Films

Critical Issues on Fly-Ash Alkali-Activated Using Hydroxide and Carbonate Sources

Cu-Sn Anode Failure: Understanding the Mechanism From the Optical Approach

Deep Learning Based Reconstruction From Sparse 2D Projection Datasets for In Situ Tensile Experiments

Dendrite Growth Observation of the Ni-Based System Using In-Situ Synchrotron Imaging

Deployment and Testing of a Fiber-Based Instrument for In-Reactor Thermal Property Measurements at MIT Research Reactor

Depression of Pyrite by Trihydroxybenzene During Collectorless Flotation

Determination of the Influence of Thioglycollate on the Flotation of Galena (PbS)

Developing In-Situ Diagnostics for Evaluation of Incipient Electrochemical Nucleation and Growth

Development and Characterization of an Ultrastrong Single-Phase High Entropy Alloy With Enhanced Ductility

Development of Axlebox Bearing Temperature Monitoring System to Ensure the Operation Safety of Railway Vehicle

Durability Evaluation of Cement-Based Composites Reinforced With Guaruman Fibers

Effect of Magnesium Oxide on Performance of Alkaline Iron Ore Pellets

Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel

Effects of Red Mud on the Mechanical and Piezoresistive Properties of Mortars

Effects of SiO2 and MgO on Hydrogen Reduction of Fe2O3

Enabling Advances in Electron Backscatter Diffraction With Direct Electron Detectors (DED)

Enhancement Recovery of Fine Kaolin Particles by Microbubble Flotation

Estimation of Elastic Constants in Low Symmetry Materials With In-Situ Neutron Diffraction

Estimation of Online Homogenization of a Particle Mixture With Acoustic Emission

Evaluation of Porosity Distribution in Continuously-Cast Thick Slabs by Using Ultrasonic Technology

Evaluation of the Physico-Mechanical Properties of Extruded, Pressed, and Fired Red Ceramic Blocks

Experimental and Numerical Evaluation of Soil-Cement Blocks Under Simple Compression and Cyclic Shear Loads

Experimental and Numerical Modeling of Thermal Performance of Extruded, Pressed and Fired Ceramic Blocks

Exploration of Microwave Heating Characteristics of Contacted Multiple Pellets by Numerical Simulation

Feasibility of Incorporating Water Treatment Plant Sludge Into Ceramic Blocks

High Energy Diffraction Microscopy as a Tool for In-Situ Characterization of Materials

High Purity Arsenic Trioxide Prepared From Arsenic Sulfide Residue With Reduction Method

Implementing Transmission X-Ray Microscopy at X-Ray Free Electron Lasers for In-Situ Studies of Laser Powder Bed Fusion

In-Situ Characterization Methods for Thermophysical Property Measurements Using the Electro-Magnetic Levitator On-Board the International Space Station

In-Situ Grain Growth Analysis With Quenching Dilatometry and Non-Destructive Laser Ultrasound

In-Situ Mechanical Property Measurement Using Laser Ultrasound

In-Situ Multi-Scale Analysis of Local Deformation Behavior of Lath Martensite in Low-Carbon-Steel

In-Situ Sensor Monitoring and Multiclass Porosity Defects Prediction for Laser Powder Bed Fusion With Machine Learning

In-Situ TEM Study of Dissociation of Retained Austenite in Carbide Free Bainitic Steel During Tempering at 400 ℃

Influence of Functional-Gradation on the Energy Absorption Performance of Triply Periodic Minimal Surface (TPMS) Lattice Structures

Influence of Marble Granulometry on the Hardened State Properties of Mortars

Investigating the Tribological Behavior of Nitinol Alloys Manufactured via Mechanical Alloying for Hip Implant Applications

Investigation of Laves Phase Dissolution and Homogenization Kinetics in IN718 With Varying Si Content Through a Combination of Characterization and Calculation

Investigation of the Potential use of Spodumene in Sustainable Mortars

Lattice Parameter Evolution During the β-to-α and β-to-ω Transformations of Iron and Aluminum Modified Ti-11Cr(at.%)

Leveraging XRD, Total Scattering, and XAFS Techniques to Decipher Structure-Property-Performance Relationships in Ammonia Decomposition Catalysts

Local Electrical Characterization of Grain and Phase Boundaries in Alloys

Low Voltage Electron Back-Scatter Diffraction: Enabling High Resolution Mapping of Early Stage Recrystallization

Mechanical and Thermal Properties of 3D Printed ABS Composites With Rice Husk Ash Incorporation

Mechanical Behavior Analysis of Cement Mortar in Hardened State With Substitution of Furniture Sawdust Residue (FSR)

Micromechanical Investigation of Defects in Single Crystal Ni-Based Superalloys

Microstructural Characterization of Nitrided Low Alloy Steel Using EPMA Scatter Diagram Method

Microstructural Evolution of Fe-Bearing Intermetallic Particle After Thermo-Mechanical Processing Using X-Ray Microcomputed Tomography

Modeling the Thermal Frequency Response of Printed Silver on Glass, Alumina, and Polyamide Substrates for Modulated Photothermal Radiometry

Morphological Properties of Reclaimed Asphalt Pavement

Multiscale Characterization and Experimentation to Analyze the Role of Ceramic Inoculants in the Failure Behavior of Aluminum Metal Matrix Composites

Multiscale Characterization of Micron-Scale Plasticity in Hcp Metals

Novel Acoustic Characterization Techniques for Lithium-Ion Battery Materials

Novel In-Situ Characterization of Uranium Diboride via Thermal Imaging

Opening Pandora’s Box: Addressing the Closed Nature of Post-Processing Methods for Computed Tomography (CT) Images With Application Perspectives for Energetic Materials

Phase Evolution of a Spinodal Copper Alloy, Characterized by In Situ Synchrotron X Ray Diffraction

Physico-Chemical and Mineralogical Characterization of Soils for the Production of Extruded, Pressed, and Fired Red Ceramic Blocks

Physicochemical Characterization and Alkali Dissolution of Alluvial Fe-Columbite Deposit for Feasible Formation of Soluble Niobium and Tantalum Complexes

Physicochemical Properties and Heavy Metal Levels in Water and Sediment of Iyere River, Ibiono Ibom Nigeria

Preparation of Glass-Ceramics From Ferronickel Slag and Iron Ore Tailings: Effects of Crystallization Temperature and Time

Process Mineralogy of a Manganese–Silver Ore in Mexico

Production and Evaluation of Technological Properties of Artificial Agglomerated Rock With Black Rock Waste São Gabriel

Put a Gleeble in the Beam: Concepts for the Materials Oscilloscope

Quantitative Analysis of Corrosion Products, Pores and Carbides on Uncoated Single Crystal RenéN5 Superalloy

Recent Progress in Microwave-Assisted Synthesis of Composites Based on Titanium Alloy and Hydroxyapatite at Central South University

Relating Steel Phase Transformation to Electromagnetic Sensor Signals for Thin and Thick Strip

Research and Analysis of Parameters for the Bottom-Blown O2-CO2-CaO Process in BOF Converter Based on the Material and Heat Balance Models

Research and Application of O2-CO2 Mixed Blowing in Converter Steelmaking

Rheological and Mechanical Viability of Alkali-Activated Pastes for Oil Well Application

Role of Biogas Recirculation in Direct Reduction of Iron Ore with Woody Biomass

Shock Compression Impact on Covalently-Bonded Materials

Simulation of Temperature Field of Water Cooling System in Nickel Flash Furnace Melting Process

Slag Characterization Techniques– Necessary Tool for Simulation of Refractory Corrosion

Soil Blocks Using Geopolymer and Partial Replacement of Soil With Construction Waste

Structural and Dielectric Properties Analysis of Batio3 Doped Single and Double With Gadolinium and Europium

Structural Characterization of Tio2, Wo3, Zno and Sno2 for Modified Zinc - Titanium Dioxide Nanocomposites Smart Coatings

Study and Characterization of an Adsorbent Material Used in the Direct Extraction of Lithium

Study on the Influence of Utilization Ratio of Carbonaceous Particles Injection in BOF Steelmaking

Synthesis and Characterization of Conventional and Non-Conventional Adsorbent Materials

Synthesis and Characterization of Surfactant Modified Clays for Adsorption Applications

Technological Properties of Soil-Cement Bricks Produced With Soils From the Red Ceramic Industry of Campos Dos Goytacazes

The Effect of Low Temperature Atmospheric Discharge Plasma on the Physical-Chemical and Technological Properties of Iron Sulfide Minerals

The Feasibility of Using Epoxy Resin Reinforced With Sugar Cane Bagasse Residue for a High Performance Coatings: A Blue Ocean Analysis

The Reaction Behavior and Removal Law of Alkali Metals in the Pellet Process of Belt Roaster

Thermodynamic Analysis of Preparation of LiF Obtained by Direct Roasting of α-Spodumene With NaF

Thermodynamic Study for Chlorination of Waste Circuit Boards

Thermophysical Property Measurement of Rare Earth Titanates With Aerodynamic Levitation and Laser Heating

Uncovering Fast Thermal Effects in Metals by In-Situ MEMS Heating in SEM

Unraveling the Mystery of Helium as Environment Gas in 3D Printing of Metals

Using Thermo-Calc Software to Produce the Phase Diagram and Thermodynamic Properties of Cd-Te System

Questions about ProgramMaster? Contact programming@programmaster.org