A Comparative Corrosion Study of Magnesium Alloys Processed via Shear Assisted Processing and Extrusion

A Comparative Study about Hydroxyapatite Coated AZ31 and AZ91 Mg Alloys

A Theoretical Model for Predicting Stacking Fault Energies of Ternary Magnesium Alloys Based on High-throughput Calculation and Machine Learning

Advances in Magnesium Primary Production by Reactive Cathode Molten Salt Electrolysis with G-METS Distillation

Barrel Finishing of Magnesium Alloys

Combined Effect of Alloying and Grain Size on the Deformation Behavior of Magnesium Alloys

Design of the Continuous Gravity-driven Multiple Effect Thermal System (G-METS) for Efficient Low-cost Magnesium Recycling

Designing Highly Corrosion-resistant Mg Alloys via Second-phase Control

Development of Compound-vertical-retort Technology for Magnesium Production and its Application

Development of Magnesium-Strontium / Calcium (Mg-Sr/Ca) Based Alloys with Improved Sinterability for Next Generation Biomedical Implants

Development of Mg-based Superelastic Alloy through Aging Heat Treatment

E-13: Advanced In-situ Investigation of Deformation Behavior in a Textured Magnesium Alloy AZ31

E-14: Critical Resolved Shear Stresses for Slip and Twinning in Mg-Y-Ca Alloys and Their Effect on Ductility

E-15: Effect of Differential Speed Rolling (DSR) on the Dynamic Recrystallization of Mg5Zn Under Different Temperatures

E-16: Effect of Grain Size on Bio-corrosion Properties of AZ31 Magnesium Alloy

E-17: European Sustainable Magnesium from Chromite Production and Dolomite Excavation Residues

E-18: Flammability Resistant Magnesium Alloys Processed by Equal Channel Angular Pressing

E-19: Formation of CO2 Absorption Induced Corrosion Resistant Magnesium Carbonate Layer Formation on Various Magnesium Alloys

E-20: In Vitro and In Vivo Degradation Behavior of Novel Corrosion-resistant Mg Alloys

E-21: Investigating the Corrosion Response of Cast and Extruded ZK60 Magnesium Alloy Processed via Shear Assisted Processing and Extrusion

E-22: Investigation of Transformation-mediated Nanotwin Nucleation Mechanisms in Magnesium Using Deep Neural Network Interatomic Potentials

E-23: Kink Bands Strengthening of LPSO Mg-Zn-Y alloys After Processing by High-pressure Sliding (HPS)

E-24: Nucleation of {1012} Twins in Magnesium Through Reversible Martensitic Phase Transformation

E-25: Simulations of Microgalvanic Effects in Corrosion of Mg Alloys

E-26: Strain Rate Dependent Deformation Behavior and Microstructure Evolution of Magnesium Alloys

E-27: Strain-localized Deformation Banding during Tensile Deformation of Pre-compressed AZ31 Mg Alloy

E-28: Towards Improved Understanding of Press and Sinter Processing of Mg and Mg Alloy Powders

E-29: Understanding the Influence of Alloying on Texture Development in Mg-(Zn-Ca) Alloys During Recrystallization

Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd using C-ring Tests

Effect of Second Phases Evolved Through Heat Treatment on Mechanical and Bio-corrosion Behaviour of a Mg-Zn-Ca-Mn Alloy

Effects of Ca and Zn Additions on the Static Recrystallization Kinetics and Texture Evolution in Wrought Magnesium Alloys

Engineered Bioabsorption for Implant Applications

In Situ Study of the Degradation Behaviour Under Load of Mg1.8Y0.6Zn(1Ag) Using Synchrotron Tomography

In Vitro Degradation Assessment of Magnesium Wire in Sternal-closure-like Conditions

Influence of Corrosion Extent on Residual Tensile Strength and Corrosion Fatigue Properties of an Mg-Y-Nd Alloy Characterized by µCT

Influence of Preforging in Extrusion as well as in Equal-channel Angle Extrusion (ECAPEX) on the Properties of Magnesium Rods

Integrating Multimodal Corrosion with Correlative Microscopy Across Multiple Length Scales

Metastable – stable

Microstructure and Properties of Wrought Mg-Gd-Y-Zn-Zr Alloy (VW94) Alloy

Multiscale, Multimodal Characterization of Recrystallized and Non-recrystallized Grains during Recrystallization in a Hot-compressed Mg-3.2Zn-0.1Ca wt.% Alloy

Open-air Plasma Assisted Si-O-C Layer Deposition on AZ91D Mg Alloy for Corrosion Mitigation

Optimization of the Microstructure and Performance of Aluminum Alloy Cold Spray Coatings on Magnesium Alloys

Precipitation Behavior in Low-alloyed Mg-Ca-Zn Alloys

Processing Map and Performance of a Low-cost Wrought Mg Alloy: ZAXEM11100

Protective Micro-arc Oxidation Surface Coating on AZ80 Forged Magnesium Alloy

Quantifying the Role of Coarse Intermetallic Particles on Twinning Behavior

Recent Advances in PRISMS-plasticity Software for Simulation of Deformation in Mg Alloys

Reductant Consideration in Thermal Pathways to Primary Magnesium Metal Production

Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility

Sustainable Domestic Manufacturing and Protecting IP in a Post-AIA World

The Effects of Temperature and Strain Rate on the Tensile Behaviour of Die-cast Magnesium Alloy AE44

The Mechanisms to Improve Creep Resistance in a Die-cast MgREMnAl Alloy

Questions about ProgramMaster? Contact programming@programmaster.org