| About this Abstract |
| Meeting |
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Symposium
|
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Presentation Title |
Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products |
| Author(s) |
Yoshihiko Kobayashi, Eiji Sakamoto, Tetsuya Yagami |
| On-Site Speaker (Planned) |
Yoshihiko Kobayashi |
| Abstract Scope |
In the process design of closed die forging, various design conditions such as the number of stage and the die-surface shape for each stage are determined by a designer considering the process requirements; load restriction, forged shape accuracy, and so on. During the process design, it is a problem that these design conditions have a lot of combinations. For this reason, a forging process has usually considered by trial and error using CAE or real machine. In particular, there are numerous patterns for the combination of the number of stage and the die-surface shape for each stage, which is called process layout. Researches for improving design-operations efficiency have been performed. Nevertheless, the process-layout design is still dependent on trial-and-error approach. In this study, to improve the efficiency about process-layout design, automatic design system using CAE was developed for closed die forging of disk-shaped products. |
| Proceedings Inclusion? |
Definite: At-meeting proceedings |