A New Transient Surface Remelting Process for Smoothening AM Metals

Accelerated Development of Tungsten Alloy Plasma Facing Materials

An Exploration of Process Parameters and Process-induced Defects in LPBF Ti-6Al-4V via Fatigue and Fracture Characterization

An Investigation into Non-destructive Material and Part Qualification for Fatigue Critical Applications

Can the Retained Austenite in Nitrogen-Atomized Additively Manufactured 17-4PH Stainless Steel Improve the Environmental Crack Resistance?

Characteristics of Non-Spherical Ti-6Al-4V Powder in Laser Powder Bed Fusion: The Effect on Microstructure, Surface Finish and Fatigue Behavior

Characterizing the Relationship between Microstructure and Mechanical Properties of Wire Arc Additively Manufactured 316LSi Samples in As-Deposited and Forged Conditions

Comprehensive Fatigue Evaluation via Multiple Testing Methods and Loading Conditions on an LPBF F357 Alloy Processed by HIP with Rapid Quench Treatment

Critical Defects in Laser Powder Bed Fusion- Surface, Sub-Surface, Geometric and Microstructure Effects

Critical Initial Crack Size for AM Components: Calculations, Implications, and Applications

Defect Population Variability and Fatigue Life Estimation in Additively Manufactured Components

Effect of Build Orientation and Stress Ratio on the Fatigue Crack Growth Behavior of Laser Powder Bed Fused Ti-6Al-4V

Effects of Printer Manufacturer, Contour Pass, Print Angle, Hot Isostatic Pressing, and Surface Texture on the Fatigue Performance of PBF-L/IN-718

Effects of Process Parameters on Mechanical Behavior of Wire Arc Additively Manufactured (WAAM) AISI 316LSi

Elevated Temperature Fatigue Mechanisms of the LPBF IN718 Alloy Densified by HIP with High CSL Density

Fatigue-based Process Window for Laser Powder Bed Fusion Additive Manufacturing

Fatigue and Fracture of Bi-metallic Parts Produced through Wire Arc Additive Manufacturing

Fatigue Behavior of Additively Manufactured Ti-5553

Fatigue Behavior of Novel PBF-L Ti-6Al-4V High Pressure Heat Treatments

Fatigue Crack Growth and Total Life Fatigue behaviour of 7075 Aluminium Alloy Produced by Laser Powder Bed Fusion

Fatigue Life Depends on Layer Height When Multiple Lasers are Used: A Study on L-PBF IN718 with As-Built Surfaces

Fatigue Performance and DADT Certification of Powder-bed Additively Manufactured Ti-6Al-4V: Defect Assessments, EIDS Distributions, and Inspection Limits

Fatigue Properties of Specimens Fabricated via Metal Additive Manufacturing

Fatigue Strength of High Strength Low Alloy AF 9628 Steel Fabricated via Laser Powder Bed Fusion

High-Cycle and Very-High-Cycle Fatigue Behavior of Additively Manufactured Ti-6Al-4V Alloys and Methods for Rapid Qualification

Impact of Micro and Mesostructure on the Failure Resistance of Laser Powder Bed Fusion-processed Materials

Impact of Surface Texture and Temperature on the Low Cycle Fatigue Life of Laser Powder Bed Fusion GRCop-42

In-situ Fatigue Life Prediction with Simulated Defects for Additive Manufacturing Process

Influence of Post-build Treatments on the Hydrogen Embrittlement Susceptibility of Additively Manufactured 316L under Ambient and Cryogenic Temperatures

Influence of Post-Process Forging on Microstructure and Properties of LPBF AlSi10Mg

Insights into the Effect of Underlying Microstructure on the Fatigue Performance of Fully Lamellar Ti-6Al-4V

Investigating the Influence of Part Geometry on the Fatigue Resistance of SLM Thin-Wall Inconel 718

Investigation of the Influence of Oxygen Distribution on the Processability and Fatigue Properties of the LPBF Processed Ti-6Al-4V

Localized Residual Stress Measurements via Energy-based Nanoindentation in Titanium Alloys Processed with Laser Powder Bed Fusion

Low-Cycle-Fatigue Behavior of Stainless Steel 316L Manufactured by Laser Powder Bed Fusion

Modeling the Effects of Surface Treatment on the Fatigue Performance of AM Ti-6Al-4V Microlattice Struts

NDI and Fatigue Assessment of AM-med Components

On the Fatigue Behavior and Failure Analysis of L-PBF Ti6Al4V Strut-Like Specimens: The Role of the Building Orientation and Mean Stress

Rapid Prediction of Fatigue-performance Heat Maps in Additively Manufactured Metals by Integrating Physics-based and Data-Driven Modeling

Strong and Fracture-resistant High-entropy Alloy Intrinsically Toughened by 3D-printing

Tailoring Materials by Additive Manufacturing - From Process Parameters to Superior Fatigue Properties

The Effect of Laser Surface Modification on the Corrosion and Fatigue Performance of AA5456-H116

The Influence of Additive Manufacturing Process Parameters on Residual Stress 0f 17-4 PH Stainless Steel Parts Manufactured by Laser Powder Bed Fusion Additive Manufacturing System

Towards Defining a Process Window in Terms of Fatigue

Towards Rapid Qualification, a Hybrid Experimental-Modeling Approach to Account for the Presence of Porosity

Towards the Use of Representative Specimens for the Qualification of Additively Manufactured Parts

Understanding Fracture in Additively Manufactured Metals: Towards Certification of Complex Geometries

Using Microstructure-Sensitive Modeling to Accelerate Qualification of Fatigue Critical AM Alloys

Questions about ProgramMaster? Contact programming@programmaster.org