A Case of Update on 330kA Aluminium Potline in China

A Machine-learning Assisted Optimization Approach and Microstructure Characterization Method for Laser Powder Bed Fusion

Assesment of the Mechanical Properties of an AlMg7Cu2 Alloy with TiBZrMoV Alloying at Different T6 Solution Heat Treatment Conditons and Modeling of Its Behavior by Continuum Mechanics Approach

Characterisation of A201 Alloy Produced by Low Pressure Die Casting into Resin Sand Moulds

Development of Al-Ce-(Fe)-(Mg) Alloys for Elevated Temperature and High Strength Applications

Effect of Erbium and Europium Addition on Microstructure and Mechanical Properties of A356, A206 and A201 Alloys

Effect of Melt Thermal-rate Treatment on Microstructure and Mechanical Properties in Al-Zn-Mg-Cu Alloy Billets Fabricated by Direct-chill Casting

Effect of Zr-Er-Y L12 Phase on Precipitation Behavior of Al-Zn-Mg Alloy

Effects of Pass Strains of Multi-directional Forging and Additive Cold Rolling of Pure Ti on the Microstructural Evolution and Mechanical Properties

Elastic-plastic Approach on Transformation of LPSO Phases in a Mg-RE Alloy by Nanoindentation

Evolution of Spheroidal α-AlFeSi Phase in 1200 Aluminum by 3D Visualization Using FIB-SEM

H-1: Numerical Simulation of Effect of Process Parameters on Solidification Structure in Titanium Alloy TC4 Vacuum Arc Remelting Process

Importance of Runner Design in the Reproducibility of Tensile Tests

Improved Strength in Mg-Al Dissimilar Impact Welding by Surface Nanocrystallization of Mg Alloy Sheet

Inductance-based Structural Self-sensing, as Shown for Sensing Shape-changing Deformation In Aluminum

Influence of Ce, Ni and Cu on Castability and Mechanical Properties of Al Piston Alloys

Investigating Hydrogen Porosity in Aluminum Laser Welding Using a Three-dimensional Cellular Automaton Model

Investigation on the Grain Refinement of Mg-Al Alloys by Superheating Process Using Rapid Solidification Process

Mechanical Property Comparison of Al11Si Wheels Grain Refined by Ti, Nb and Nucleant 1582

Mechanical Property of Nb Grain Refined AlSi11 Alloy

Observation of Impact Deformation and Fracture on Severe Plastic Deformed Ti by Using Synchrotron Radiation

Optimization of Die Casting Process with Various Oxygen Concentration

Phase Stability in Laser Melted Microstructures of Al-X (X=Zr, Nb, V) Alloys

Physics-constrained, Inverse Design of High-temperature, High-strength, Creep-resistant Printable Al Alloys Using Machine Learning Methods

Precipitate-strengthened Micromechanical Behaviors of Magnesium Alloy Under Cyclic Loading

Production of Titanium Wire from Scrap Material Using Continuous Extrusion Machine

Role of Alloying Elements and Solidification Conditions on the Evolution of Fe-rich Intermetallic Phases in Recycled Al-Si Alloys with Higher Fe

Role of Guinier-Preston Zones in Achieving High Strength-ductility in a New Mg-Zn-Al-Ca-Mn-Ce Sheet Alloy

Role of Interfaces on the Orientation Dependent Spheroidization Response of á-colonies in Ti-6Al-4V Alloy

Selective Laser Melting of a TiB2/Al-Cu-Mg-Ni-Sc Composite

Solidification Evolution, Microstructure and Tensile Properties of Al-Mg-Sc Alloys

Study on the Improvement of the Mechanical Properties Heavy Commercial Vehicle’s Wheel by the Molten-forged on the A356 Alloy

The Beneficial Effects of Ce Additions on High-Fe Secondary Al-Si Casting Alloys

The Myth on the Pore Formation in Aluminum Casting on the Alloying with Rare Earth Elements

Through-thickness Heterogeneity in the Mechanical Properties of Hot Rolled AA7075-T651

Questions about ProgramMaster? Contact programming@programmaster.org