| About this Abstract |
| Meeting |
2023 TMS Annual Meeting & Exhibition
|
| Symposium
|
Quantifying Microstructure Heterogeneity for Qualification of Additively Manufactured Materials
|
| Presentation Title |
Build Geometry and Parameter Influence on Alloy 718 Microstructure, Properties and Spatial Variation in Additive Manufacturing |
| Author(s) |
Anna Dunn, Dan Young, Joy Gockel |
| On-Site Speaker (Planned) |
Joy Gockel |
| Abstract Scope |
Additive Manufacturing (AM), particularly laser powder bed fusion, is being studied for use in critical component applications. Tensile and fatigue testing shows differences when built using different laser powers. However, when fabricated in an as-printed geometry, the gauge sections of the two specimens are different and experience different thermal behavior. This work explores microhardness, microstructure, and porosity from Alloy 718 samples made with varying laser power and different build geometry sizes representative of the gauge sections in the tensile and fatigue bars. Results show that microhardness varies spatially across the sample. Smaller diameter metallographic coupons (fatigue diameter) have a coarser microstructure and lower microhardness than the larger diameter (tensile diameter) when built using the same parameters. Therefore, the fatigue and tensile properties are not comparing the same material structure. Understanding the effect of build geometry on microstructure provides insight towards consistency in AM mechanical properties testing strategies. |
| Proceedings Inclusion? |
Planned: |