ProgramMaster Logo
Conference Tools for 2025 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2025 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals: Thermodynamics and Rate Phenomena
Presentation Title Improvement of Co-Ni-Re-Ti Mobility Descriptions in NIST Co-Ni Mobility Database
Author(s) Kil-Won Moon, Maureen Williams, Carelyn Campbell
On-Site Speaker (Planned) Kil-Won Moon
Abstract Scope We conducted experiments with four-binary and four-ternary diffusion couples to improve the accuracy of Co-Ni-Re-Ti mobility descriptions in the NIST Co-Ni mobility database, which contains Co-Ni-Al-Cr-Re-Ta-Ti-W. Optimizing mobility parameters for the quaternary system has the advantage of allowing validation by each ternary system. The parameters were optimized based on the least square errors between the composition profiles of interdiffusion experiment data and calculated composition profiles by DICTRA using the constrained global optimization method. This approach enables the use of multicomponent composition profiles for optimization, eliminating the need to calculate multicomponent diffusion coefficients and paving the way for more efficient research in the future. In case of discrepancies in the mobility parameters, the selection was based on the parameter with the smaller error across all related interdiffusion data simultaneously. Some challenges of implementing the optimized parameters into the database will be discussed.
Proceedings Inclusion? Planned:
Keywords Computational Materials Science & Engineering, High-Temperature Materials, Modeling and Simulation

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A study of the time dependence of secondary phase formation
Analysis of circulation flow and mixing time in Ruhrstahl Heraeus (RH) degasser with argon ladle bottom blowing through numerical modeling
Application of an electrode model to simulate a søderberg electrodes during operation
Comparative Analysis of Commercial and Open-Source Software for Multiphase Flow Simulation in a Ladle Furnace Model
Comparative Study of Two Methodologies for the Analysis of the Thermal Evolution of Steel Slabs in a Reheating Furnace
Correlation of Bond Structures and Viscosity of Submerged Arc Welding Fluxes towards Shipbuilding Steels
EFFECT OF ARC TRANSIENTS ON FLOW IN VACUUM ARC REMELTING
Effect of Ladle Shroud Blockage on Flow Dynamics and Cleanliness of Steel in Coupled Ladle–Shroud–Tundish System
Effect of Stress, Temperature, and Langevin Friction on the Rate of Reaction in Dislocation Dipoles
Experimental and Computational Studies on Solid-State Dewetting of Single Crystal Nickel and Copper Thin Films
Exploring the Evolution of Steel Slag Chemistry: Foaming Properties
Fluid Dynamic Study of Flow Patterns Through the Implementation of a Swirl Nozzle in a Ladle Furnace
Improvement of Co-Ni-Re-Ti Mobility Descriptions in NIST Co-Ni Mobility Database
Metals extraction on Mars through carbothermic reduction: thermodynamic calculation and experimental result
Modeling Dynamic Burden Behavior in a Secondary Lead Reverberatory Furnace using Computational Fluid Dynamics
Mold simulator study of heat transfer behavior of medium carbon steel slag film inside continuous casting mold
Non-Metallic Inclusions in a High Manganese Steel Rail
Novel approach to measure the thermodynamic property of tri-calcium phosphate using the phase relation in the CaO-SiO2-P2O5 ternary system
Numerical simulation of multiphase flow in a Single Snorkel Refining Furnace (SSRF) with dual injections of argon gas for the degassing process.
Numerical Simulation of Stirring Coil System for Use in the Steel Refining Ladle
Numerical study of SEN depth on heat transfer, fluid flow and solidification in a thin slab continuous casting mold
Optimization of Rotary Kiln in Molybdenite Concentrate Oxidation for Molybdic Trioxide Production
Predicting Blast Furnace Raceway Dynamics Using Coupled Computational Fluid Dynamics-Discrete Element Method
RH精炼炉渣性能与插管
SnOx solubility in CaO-FeOx-Cu2O slag under copper saturation
Study of the Heating System of a Metallurgical Crucible Through Experimentation and Numerical Simulation
Study of Transient Thermo-fluid Model of Meniscus Behavior in Continuous Casting Mold by Navier-Stokes-Cahn-Hilliard equation
Study on the mechanism of slag-sticking in the insertion tube of high carbon steel RH refining process
The Oscillating Drop’s Sensitivity to Thermophysical Properties of the Melt and Flow Conditions in Electromagnetic Levitation Experiments
Thermodynamic Analysis of Solid-State Reduction of Electric Arc Furnace Dust with Methane-Hydrogen Mixtures
Thermodynamic equilibria of yttrium and sulfur in liquid iron
Three dimensional effects in the dendritic growth competition of bi-crystals
Transient Evolution of Slag Droplets during Slab Continuous Casing Process
Understanding enhancing Al/Cu spot welding joint performance with an Ag interlayer

Questions about ProgramMaster? Contact programming@programmaster.org