A Durable, Inexpensive Oxygen Reduction Reaction Electrocatalyst

A Study on Charge-discharge Characteristics of Dipping Ga-Sn Electrode

Activated Alumina as Value-added Byproduct from the Hydrolysis of Hierarchical Nanoporous Aluminum with Pure Water to Generate Hydrogen Fuel

Alloying Iron Foams with Nickel to Mitigate Kirkendall Microporosity Formation during Redox Cycling at 800°C

Alternative Spinel for Advanced Protective Layer for SOFC Stacks

Analytical Transport Network Theory for the Characterization and Design of Materials for Energy Storage Applications

Au-nanoparticle Incorporated Perovskites for Optical Sensing in High Temperature Gas Streams

Catalytic Activity of Cobalt-containing Oxides for the Cathodic Reaction of IT-SOFC

Cathode Modification by Dielectric Materials and Their Performance in Li-ion Battery

Challenges for Future Electric Vehicle Battery System

Charge-discharge Performance of Metal Hydride/Air Secondary Battery Using Modified Air Electrode by PDL Method

Crystallographic Engineering of Battery Materials

Density Functional Theory Calculations of ZnO Nanopyramids: Crystal Growth and Improved Performance in Water Splitting

Design, Fabrication and Performance of Thin-film Solid Oxide Fuel Cells

E-10: A BiVO4-RGO Bilayer Electrode based Photoelectrochemical Supercapacitor

E-11: A Critical Evaluation of Internal Temperature Sensors Implanted in the Lithium-ion Batteries

E-12: A Method for Efficient Lithium Desorption in Ni-rich Layered Structure Cathode Materials for Lithium Resource Regeneration

E-13: A Novel Class of High-ionic Conductivity, Stable Electrolyte for Li-ion All-Solid-State Batteries

E-16: Enhanced Stability of B-site W Doped Pr0.6Sr0.4Fe1-xWxO3-δ Ceramic Membranes for Water Splitting

[Replication or Save Conflict]

[Replication or Save Conflict]

E-17: Enhancement of Metal Surface Mechanical Property by High Energy Beam Injection

E-18: Fe2O3 Nano-particles Grown on Carbon Fabric as a Freestanding Anode for High-performance Lithium-ion Batteries

E-19: Finding Efficient Growth Parameters for Carbon Nanotube Growth

E-20: Linking Nanoscale Grain Boundary Composition and Energetic Properties in Ceramic Oxides

E-21: Mechanistic Elucidation of Electrodeposition Stability at Metal-Solid Electrolyte Interfaces

E-22: Microwave Dielectric Properties of Isovalent and Aliovalent Ions Doped Ca4(La4Pr2)(SiO4)4(PO4)2O2 Ceramics

E-23: Nanotwinned Copper Films Retaining High Strength and Moderate Elongation after Low Temperature Annealing

E-26: Solid State Phase Change Materials for Energy Storage: Developing a Database

E-27: Strategies for the Viability of Li-S Rechargeable Batteries by Using Nanotechnology

E-29: Theoretical Prediction of Intercalation Compounds Formed by Co-Intercalation of Mg Ions with Diamine into Graphite Anodes for Mg-Ion Batteries

E-30: Thermal Cycling of Room Temperature Ionic Liquid-based Supercapacitors for Aerospace Applications

E-31: Understanding Dendritic Growth in Mg-based Batteries and Design of Metallic Anodes

E-8 (Digital): Improving Wetting of Silver (Ag) on Oxide Surface with Patterned Nickel (Ni)-particles

E-9 (Invited): Protective Coatings for Solid Oxide Fuel Cell Stacks

Effect of Aluminizing on the High-temperature Oxidation Behavior of an Alumina-forming Austenitic Stainless Steel and a Chromia-forming Ni Based Alloy

Electrophoretic Deposition: A Promising Strategy for Fabricating Alkali-ion Rechargeable Cell Electrodes with Superior Electrochemical Properties

Engineering Routes Towards Synthesis of Layered Oxide Materials for High-performance Sodium-ion Batteries

Enhanced Photo Response by Oxygen Retreatment at Hetero-interface of MoS2/Si Solar Cells

Enhancing Anodic Catalytic Activity in Solid Oxide Fuel Cells by Liquid Phase Infiltration

Fast Charging of Li-ion Batteries: Aging and Diagnostics

Flexible Multimodal In-situ Characterization Approaches for Understanding Battery Electrode Cycling

Highly Selective Liquid Oxide Membranes: Properties and Prospects

Highly Stable and Efficient Perovskite Solar Cells with Functional Nanocomposites and Interface Engineering

Ice-templated Sintered Metal Oxides with Directional Porosity and Characterization of Compressive Mechanical Properties

Impact of Inter-particle Interactions on Electrochemical Performance of Lithium-ion Battery Electrodes

Improvement in Rechargeability of Zinc Electrode for Aqueous Secondary Batteries

In-situ Measurement of Stresses and their Effect on Diffusion in High Energy Density Electrode Materials

Isolating the Thermophysical and Electrochemical Signatures of Internal Faults within an Intensively Coupled System, Lithium-ion Batteries

Leveraging Reversible Chemistry for Materials Sustainability in Energy Storage

Life Cycle Analysis of Battery Materials: a Circular Economy Perspective

Life Cycle Analysis on Battery Energy Storage Systems: A Case Study on Flow Batteries and Lithium-ion Batteries

Long Cycle-life and High-rate Magnesium-ion Battery Anode Enabled By Self-healing Through Near-room-temperature Solid-liquid Phase Transition

Mechanics of Metallic Lithium and Sodium Anodes

Mechanistic Understanding of Ion Intercalation and Phase Transformation Behavior in layered Materials at Atomic Scales

Mesoscale Separator Design to Mitigate Dendrite Formation in Lithium Batteries

Metal Enhancements to Porous Carbon Materials for Hydrogen Storage

Minimizing Cr-evaporation from Balance of Plant Components by Utilizing Cost-Effective Alumina-Forming Austensic Steels

Multiscale Modeling of Graphite Microstructures to Understand the Limitations of Fast Charge of Lithium Ion Batteries

MWCNTs/Al2S3 Heterostructure Decorated on NiCo Foam as a Highly Performance Cathode Material for Supercapacitors

On Spatiotemporal Nonuniformity of Lithium Electrodeposition

On the Design and Development of Lignin based Sustainable Materials

Operando Observation and Detailed Chemical Modeling of the Bilayer Solid Electrolyte Interphase

Oxidation of Nickel Coated AISI 430 Alloy for High Temperature Electrochemical Systems

Phase Field Simulation of Ni Coarsening in SOFC Anodes under Operating Conditions

Predicting the Influence of Manufacturing Parameters on Lithium Ion Battery Performance: the ARTISTIC Project

Preformed Oxide Scale Chemistry and Its Influence on Local Metal Loss during Dual Atmosphere Corrosion

Protonic Ceramic Fuel Cells: Materials and Device Development

Rare-earth Nickelate Cathodes for Air Independent Operation of Solid Oxide Fuel Cell Systems

Rational Design of Diffusion-blocking Layer to Suppress Chemical Degradation of Solid Oxide Fuel Cells

Reliability Testing of Li-ion Batteries for Stationary Application

Reversal of Chromium Poisoning in Solid Oxide Fuel Cell Cathodes

Solar Water Oxidation at GaAs Absorbers Protected by Electrodeposited Alloys

Solid-state Divalent Ion Conductivity

Solid State Modification via Activated Reactive Consolidation for Fabrication of Mg2Si Thermoelectric Generators

Stochasticity at Scales Leads to Thermo-electrochemical Extremes

Stress-enhanced Reaction Non-uniformity in Lithium Intercalation Compounds

Structure-property-performance Relationship and Durability of Advanced Lithium-ion Electrode Architectures

Structuring Oxides from Atomistic to Mesoscale Dimensions to Mitigate Diffusion Limitations: Perspectives for Li-ion and “Beyond Li” Energy Storage

Study on Oxygen Lance Injection Technology of High Nickel Ternary Cathode Material Roasting Process in Roller Hearth Furnace

Sulfide Based Solid Electrolyte for Lithium-sulfur Batteries

Synchrotron X-ray Science to Understand Structural and Physical Transformations in Solid State Batteries

Synthesis, Design and Fabrication of Oxide Thermoelectrics via Plasma Spray Technology

Toward Multivalent Zinc-ion Batteries: A Look at Zinc and Na3V2(PO4)3

Uncovering Structure-composition-property Relationships in Early Transition Metal Oxides for High Rate Energy Storage

Understand Behavior of Spinel Cathodes using Thermodynamic Modelling Technique

Understanding Heterogeneous Electrocatalysis of Lithium Polysulfides

Utilizing Reversible Martensitic Transformations for the Mitigation of Thermal Transients

X-ray Imaging of Metallic Anodes for Lithium Ion Batteries and Beyond

Questions about ProgramMaster? Contact programming@programmaster.org