ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium 2023 Technical Division Student Poster Contest
Presentation Title SPG-6: Electronic Transport Properties of Mn2Sb
Author(s) Salil Paranjape, Daniel Shoemaker
On-Site Speaker (Planned) Salil Paranjape
Abstract Scope Magnetic materials with the tetragonal P4/nmm Cu2Sb structure have the potential to control in-plane antiferromagnetic ordering through electrical currents or optical pulses, making them interesting for spintronic applications. However, their high resistance can cause significant joule heating during electrical read/write operations. Mn2Sb has been studied as a potential alternative due to its low defect density, which may lead to low resistivity. Single crystals of Mn2Sb were synthesized and their structure was characterized, showing a low amount of defects. Four-point resistivity measurements revealed a resistivity of 12.8 μOhm.cm at low temperatures and a high RRR of 75. This is lower than the prototypical Cu2Sb-type antiferromagnetic spintronic candidate CuMnAs (1000 μOhm.cm and RRR=2) (Volný et al. Phys. Rev. Materials 4, 064403, 2020). Mn2Sb may therefore be a promising material for spintronic devices due to its low resistivity and lack of defects.
Proceedings Inclusion? Undecided
Keywords Magnetic Materials, Characterization,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

SPG-11: Optimized Design of Interlocking Metasurfaces
SPG-12: Synthesis and Characterization of Fullerene-Antibody Conjugate Energetic Nanoparticles (FACE-NP) for Bladder Cancer Treatment
SPG-15: Transition Mechanism for the Metastable Phases in Al-Zn-Mg Alloys: A Novel Molecular Dynamics Approach
SPG-16: A Computer Vision Method of Grain Segmentation for Additive-manufactured Haynes 282 Alloys Under Various Heat Treatments
SPG-17: Characterization of Failure Mechanisms for Multimaterial Interfaces Manufactured with Additive Friction Stir Deposition
SPG-18: Characterization of Microstructural Heterogeneities in Electron Beam Additively Manufactured Haynes 282
SPG-19: Comparison of Experimental and Analytical Melt Pool Geometries for High Thermal Conductivity Refractory Metals Using ANSYS
SPG-1: Determination of Mechanical, Thermal and Barocaloric Properties of Elastomers by Rheological Techniques for Hydrostatic Pressure based Solid State Refrigeration
SPG-20: Correlating Laser Process Conditions to Balling Severity with Time-Resolved Synchrotron X-ray Visualization
SPG-21: Development of a Generalized Fatigue Assessment Approach for Steel Castings
SPG-22: Effect of Chemical Pretreatment on Properties of Natural Fiber Reinforced Composites for 3D Printing
SPG-23: Effect of Laser Surface Remelting on the Microstructure, Mechanical, Tribological and Corrosion Properties of Bio-applicable Ti40Nb25Zr25Ta10 Medium Entropy Alloy (MEA) with 0.5 at. % O
SPG-24: Effect of Process Parameters on Texture and Anisotropy of Ti-6Al-4V Wall Components Made by Wire-feed DED Process
SPG-25: Effects of the Reduction Temperature and Amount of Diluent on the Properties of High-purity Tantalum Powder Prepared via the Hunter Process
SPG-26: Effects of Varying Heat Accumulation in Laser Powder Bed Fusion on Microstructure Outcomes in Ti-6Al-4V
SPG-27: Evaluating the Effect of Tool Offset on Repaired AA7050 by Additive Friction Stir Deposition
SPG-28: Evaluation of As-deposited Tensile Behavior and Microstructure of Additive Friction Stir Deposition 304L Stainless Steel
SPG-29: In Operando Synchrotron X-ray Tomography Study of Fine Eutectic Polyphase Solidification Patterns
SPG-2: Extraction of Niobium and Tantalum Oxides from Columbite Concentrate
SPG-30: Induction-Coupled Thermomagnetic Processing of Fe-C Alloys
SPG-31 Laser-Powder Bed Fusion of Ti-6Al-2Sn-4Zr-2Mo-0.08Si (Ti-6242): As-built Properties, Kinetics of α to β Phase Transformation, and Design of Heat Treatment
SPG-32: Melt-pool Dynamics during Multiple-laser-beamed Powder Bed Fusion of Stainless Steel
SPG-33: Modeling for Time Dependent Grain Boundary Evolution
SPG-34: Multi-scale In Situ Studies of Deformation Mechanism of L-PBF 316L Stainless Steels
SPG-36: On the Influence of Gaussian and Ring-shaped Beam Profiles on Quality and Energy Consumption in L-PBF of Inconel 718
SPG-37: Oxide Morphology and Growth Kinetics for Additively Manufactured 316L Austenitic Stainless Steel High Temperature Steam Exposures
SPG-38: Printability and Defects in W & W -alloys by Directed Energy Deposition
SPG-39: Recycled Battlefield Titanium Scrap for Cold Spray Applications
SPG-3: Flexural Properties of Low Density Polyethylene Hybrid Nanocomposite Reinforced with Linen and Aramid Fabric
SPG-40: Removal of Rare Metal Impurities by Electron-beam Melting Refining Process
SPG-41: Strain Evolution and Damage Development during Tight-radius Bending of Advanced High Strength Steels
SPG-44: Advanced Characterization of the Local Atomic Orders and Their Effects on the Mechanical Properties in Metallic Glasses
SPG-45: Atomistic Modeling of Energy Barriers to Dislocation Processes in Metals
SPG-46: Automating Selective Area Electron Diffraction Pattern Phase Identification Using Image Analysis and Machine Learning
SPG-47: Bulk Material Libraries through Laser-Remelting: Combinatorial Analysis of the CrCoNi System
SPG-48: Corrosion Control of Structural Materials for 4th Gen Nuclear Reactors
SPG-49: Deformation Mechanism Characterization for Bi-modally Distributed γ' Precipitates in Allvac 718plus Superalloy
SPG-4: Phytomining of Rare Earth Elements
SPG-50: Effect of Ag on the Microstructures in Al-Cu-Ni-Mn High Entropy Alloy
SPG-51: Experimental Observation of Heteroepitaxial Recrystallization (HeRX) outside of Low Lattice Misfit Ni-based Superalloys
SPG-52: Investigation of Corrosion Mechanisms and Fatigue Property of Friction-stir Welded Joints between 6022 Al and ZEK100 Mg Alloy
SPG-54: Microstructural Characterization and Oxidation of Non-BCC High Entropy Alloys
SPG-55: Modeling of Non-equilibrium Phenomena in Laser Additive Manufacturing Using Molecular Dynamics
SPG-56: Nanoscale Differences in Tooth Enamel with Aging by Atom Probe Tomography
SPG-57: Sintering and Densification Mechanism of HfB2 Based Ultra High Temperature Ceramics for Hypersonic Space Vehicles
SPG-58: Thermal Stability of Novel Multicomponent Al-based High-performance Alloys and Its Direct Implication on Their Mechanical Properties
SPG-59: Understanding Nanostructures in the Binary Ti-Fe Alloy Using Advanced Electron Microscopy
SPG-5: Selective Recovery of Copper from Metal Concentrate of Waste Printed Circuit Boards by Ammoniacal Solvo-leaching
SPG-60: Understanding the Microstructural Evolution in the Modeled Ti-18Mo-5Al Alloy Using Scanning Electron Microscopy
SPG-6: Electronic Transport Properties of Mn2Sb
SPG-7: First-Principles Study of Vacancy Formation Energy in High-Entropy Alloys
SPG-8: Investigation of Functional Coatings for Improving Performance of Carbon Nanotube-based Supercapacitors
SPG-9: Material-based Characterization of Carbon Nanotube Field Emission Cathodes
SPU-10: Mechanochemistry for Creation of Functional Surface Treatments
SPU-11: Study of the Pyrometallurgical Recycling Process to the Recovery of Zinc and Manganese Oxide from Spent Alkaline and Zn-C Batteries
SPU-12: Viscosity Characterization of an Energetic Initiator Ink for 3D Printing
SPU-13: An In-situ Radiography Study on Meltpool Dynamics and Fluid Flow as a Function of Laser Power in Ti-6Al-4V Raster Melts
SPU-14: Understanding the Microstructure-Property Relationship in the Additive Manufactured Titanium Alloy for Aerospace Applications
SPU-15: Using Microstructural Modifications to Influence Intense Strain Localization in Inconel 718Plus
SPU-1: Cultural Heritage Science: Authentication of Native American Artwork via Materials Characterization and Forensic Analysis
SPU-2: Investigation of High Entropy Precursor Powder Synthesis for Transparent Ceramic Synthesis
SPU-3: Correlating Local and Global Tensile Deformation Behavior of AlSi10Mg Specimens Fabricated Via Laser Powder Bed Fusion
SPU-4: Developing a Metallography Procedure to Investigate Compositional Effects on the Microstructure of Lightweight Metal Matrix Composites
SPU-5: A High-speed Radiography Study for Validating the Effect of Dwell Time on Melt-pool Dynamics during Laser Powder Bed Fusion
SPU-6: Assessing Laser Powder Bed Additive Manufacturing Part Quality via In-Situ Monitoring & Machine Learning
SPU-7: Burn Rate Analysis of an Energetic Initiator Ink for 3D Printing
SPU-8: Development of a Pyrotechnic Initiator Ink for Additive Manufacturing Methodology
SPU-9: Effects of LPBF Parameters on Fatigue Life of AlSi10Mg Alloys

Questions about ProgramMaster? Contact programming@programmaster.org