| About this Abstract |
| Meeting |
2023 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2023)
|
| Symposium
|
2023 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2023)
|
| Presentation Title |
Residual Stress Analysis of Laser Powder Blown Inconel 718 Across Different Overhang Angles and Laser Outputs |
| Author(s) |
Alejandro j. Hernandez, Kurtis Watanbe, Dajalma Garcia, Kevin R. Wheeler, Francisco Medina, Ryan B. Wicker |
| On-Site Speaker (Planned) |
Alejandro j. Hernandez |
| Abstract Scope |
Directed Energy Deposition (DED) is an increasingly utilized additive manufacturing (AM) method to reproduce tough and utilitarian components for fields such as Aerospace. These components, however, are subject to a unique thermal process that impacts their mechanical properties. Such properties include the residual stress concentration and its direction, deformation, and microstructural composition of a component. Since the thermal fluctuations derive from the printing process itself, it is possible that the mechanical properties are impacted by other DED printing parameters. By using an Inconel 718 powder feedstock in Laser Powder blown Directed Energy Deposition (LPF-DED), a series of coupons with four different overhang angles of 0-, 20-, 30-, and 35° printed with different laser power outputs (1070W and 2000W) to observe these properties. These coupons will be analyzed using both non-destructive and destructive methods to record how these parameters mechanically affect the prints. |
| Proceedings Inclusion? |
Definite: Post-meeting proceedings |