ProgramMaster Logo
Conference Tools for MS&T23: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T23: Materials Science & Technology
Symposium Late News Poster Session
Presentation Title O-13: Permeation of Carbon Dioxide in Tungsten-doped Lanthanum Molybdenum Oxide/Lithium-Sodium-Potassium Carbonates Dual Composite Ceramic Membranes
Author(s) Midilane Sena Medina, Sabrina Gonçalves de Macedo Carvalho, Francisco Nobuo Tabuti, Eliana Navarro dos Santos Muccillo, Fabio Coral Fonseca, Reginaldo Muccillo
On-Site Speaker (Planned) Reginaldo Muccillo
Abstract Scope Single-phase tungsten-doped lanthanum molybdenum oxide (La<sub>2</sub>MoWO<sub>9</sub>) ceramic powders were synthesized using the complex polymerization technique. Porous ceramic pellets were obtained by thermally removing graphite, which served as a pore former. The porous pellets were impregnated with molten eutectic composition of lithium-sodium-potassium carbonates. The EDX analysis and FEG-SEM images of the external and fracture surfaces of the La<sub>2</sub>MoWO<sub>9</sub>-(Li,Na,K)<sub>2</sub>CO<sub>3</sub> composite dual-phase membrane revealed the percolation of the carbonate ions through the pores. Electrochemical impedance spectroscopy measurements, conducted within the temperature range below and above the melting point of the carbonates, demonstrated the contributions of oxygen and carbonate ions to the ionic conductivity of the dual membrane. The electrical conductivity of the carbonate ions within the membrane was continuously monitored for over 1300 hours with negligible degradation. A comparison of FEG-SEM images taken before and after this endurance test suggests minimal fouling, indicating that the membrane could be applied to carbon capture devices.

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A-15: Additive Manufacturing in High Performance Thermal Systems
A-16: Exploring Rapid Prototyping for Studio Ceramics Based on Indirect 3D Printing Technique
A-17: In Situ Residual Stress Measurements for 9Cr1Mo (Gr 91) Stainless Steel Using Ultrasound
A-18: Microstructure and Mechanical Properties of STS316L and P21 Tool Steel Laser Laminated Functionally Graded Materials
A-19: Modifying the Energy Density Formula: Uncovering Fundamental L-PBF Material Differences
A-20: Thermally Dynamic Ripening Induced Multi-modal Precipitation Strengthened NiTi Shape Memory Alloys by LENS
A-21: Towards Metal Additive Manufacturing Using Alternate Powders
B-3: Characterization of Cements and Concretes Using 3D Automated Quantitative Mineralogy and Enhanced Deep-learning Reconstruction via X-ray Microscopy
B-4: The Effects of Physical Constraints on Deep-learning Based Surrogate Models
D-21: Designing Novel Dielectric Composites with High Thermal Conductivity via Cold Sintering
D-22: Oxygen Exchange-mediated Behaviors in Ferrite Perovskite Oxides: Crystallization and a Photo-ionic Effect
D-23: Processing and Properties of Thin Solution-based Sb2Se3 Thin Films for Phase Change Materials
D-24: Structural Rearrangements during Relaxation of Lithium Disilicate Glass
D-25: Surface Energy Measurements of Yttrium Oxide
D-26: Synthesis of Spinel-type High-entropy Oxides for the Development of Light-element-containing Multication Magnetic Materials
F-14: Calculation of Stress Intensity Factors for a Multiple Crack-hole Interaction Problem
F-15: Capacitive Discharge in Flash Experiments under Air and Ar Atmosphere
F-16: Deformation and Fracture Response of Single-crystal MAX Phases
F-17: Existence of Single Crystal Structure in Congruent Melting Intermetallic Compound – Ni5Ge3
F-18: Novel Techniques in X-ray Nanotomography and High Resolution FESEM Imaging: Linking Structure and Properties of Heterogeneous and Automotive Catalysts in 2D and 3D
G-12: Characteristic Deformation Behavior of Heterogeneous-Nano structured SUS316LN Autenitic Stainless Steel at a Cryogenic Temperature
G-13: Development and Characterization of a Cast Steel Reinforced with Primary Carbides for High Strength and Severe Wear Applications
J-10: Assessing Wear Rate Based on Cutting Power Measurement
K-6: Microstructure Based Modeling Approach for the Fatigue Life Prediction of Hypo-eutectoid Steels
K-7: Numerical Analysis on the Local Deformation Behavior of the Fir Tree of Ni-based Superalloy Turbine Blade
L-10: Boron-based Nanomaterials for Advancing Boron Neutron Capture Therapy: Synthesis, Characterization, and Impressive Anti-tumor Outcomes
L-11: Development of an Antibacterial Nanocomposite Film from Cocoa Residues
L-12: Investigating Na+ ion Storage Behavior of WS2NT Encapsulated SiOC Fibers
L-13: Laser-induced PVD Coatings - A New Method to Fabricate Thin Layers that Show the Properties of Free Nanoparticles
L-14: Manufacturing and Characterization of Ferromagnetic Nano-clusters in Si by One-step Diffusion for Microfluidic Based CTC Separation System
L-15: Regulating Na+ and K+ Ion Storage into TMD Alloys: Effect of Upper Voltage Cut-off Technique
L-9: Atomic Layer Deposition of MoOx Thin Films Using Mo(iPrCp)2H2 and O3
N-10: Effect of Laser Welding on Corrosion and Microstructure in Underwater Environment
N-11: Microstructure Evolution of Al-Cu-Li Alloy during Electrically-assisted Thermomechanical Treatment
N-12: Powder Metallurgy of Electrical Contacts
N-9: Correlation between the Laser Beam Shape and the Weldability of Thin Stainless Steel Plates
O-12: A High-Performance Li-Ion Battery Based on Polymer-Derived Silicon-Oxycarbide/Graphene Nanoplatelets Composites
O-13: Permeation of Carbon Dioxide in Tungsten-doped Lanthanum Molybdenum Oxide/Lithium-Sodium-Potassium Carbonates Dual Composite Ceramic Membranes

Questions about ProgramMaster? Contact programming@programmaster.org