Al-Sm Alloys Under Far-from-Equilibrium Conditions

Anodization Compatibility of Eutectic Aluminum-Cerium Alloys

Characterization of the Microstructure of Al-Mg Alloy Matrix Syntactic Foam by Three-dimensional Analysis

Comparison of Simulation and Real Life to Set Up Holistic Approach for Extrusion Process

Computational Simulation of Nanoparticle Distributions in Metal Matrix Composite Casting Processes

Effect of Extrusion Process on Mechanical, Welding and Corrosion Behaviour of 6XXX Series of Aluminium Alloys

Effect of Heat Treatment on the Microstructure and Mechanical Properties of LB-PBF AlSi10Mg and Scalmalloy

Effect of Minor Additives to Al-Zn-Mg Alloys on Welding and Corrosion Performance for Building Constructions

Effect of Thermomechanical Processing on Strengthening of the 5181 Alloy (with 0.03 %Sc) Sheets for Preservation of 40 % Improved Strength Compared with 5083

Effects of Ultrasonic Melt Processing on Microstructure, Mechanical Properties and Electrical Conductivity of Hypereutectic Al-Si, Al-Fe and Al-Ni Alloys with Zr Additions

Experimental and Numerical Examinations Regarding the Material Flow of Combined Rolling Extrusion Process

Fatigue and Failure Analysis of an Additively Manufactured Contemporary Aluminum Alloy

High-throughput Aluminum Alloy Discovery Using Laser Additive Manufacturing

Influence of the Quench Rate and Trace Elements on 6XXX Alloys

Introductory Comments: Aluminum Alloys, Processing and Characterization

Investigation of Weld Quality for Friction Stir Welding of Extrued 6XXX Series Aluminium Alloys

Manufacturing A206 Aluminum Alloy by Step Sand Casting: Effect of Solidification Time on Mechanical and Surface Properties of the Cast Samples Using Experimental and Simulation Results

Microchemistry Evolution for 8xxx Alloys by Homogenization

Microstructural Evolution of Ultra-fine Grained (UFGs) Aluminum in Tribological Contacts

Microstructure and Mechanical Properties of a Precipitation-hardened Al-Mn-Zr-Er Alloy

Microstructure Evolution of an Al-Fe-Ni Alloy with Zr and Sc Additions Upon Different Cooling Rates during Solidification for Improving the Mechanical and Electrical Conductivity Properties

Phase Formation of Mo- and Cr-rich Compounds in an Al-Si Cast Alloy

Review of Retrogression Forming and Reaging for AA7075-T6 Sheet

Shear Assisted Processing and Extrusion of Aluminum Alloy 7075 Tubing at High Speed

Shear Assisted Processing and Extrusion of Thin-walled AA 6063 Tubing

Simulations of Wear-induced Microstructural Evolution in Nanocrystalline Aluminum

The Combined Method for Producing Long Products from Aluminium and Aluminium Alloys

The Corrosion Behavior of 5xxx and 6xxx Aluminum Alloys with Trace Calcium

The Effect of Al3Er Particles on the Structure and Mechanical Properties of an Al-Mg Alloy

The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy

Thermal Analysis of the Solidification Behavior of AA7075 Containing Nanoparticles

Thermal Properties of Hybrid Al-Cu-Components Produced by Combining Powder Pressing and Semi-solid Forming Strategies

TIG Welding of Dissimilar High-Strength Aluminum Alloys 6061 and 7075 with Nano-treated Filler Wires

Understanding the Effect of Quench Delay and Alloy Chemistry on Various 6000 Series Alloys Systems

Questions about ProgramMaster? Contact programming@programmaster.org