Additive Manufacturing of Heterogeneous Materials with High Strength and Ductility

Additive Manufacturing of Titanium Alloys: Microstructure-Mechanical Properties Relationship

Analytical Additive Manufacturing for Microstructure Evolution and the Influence on Mechanical Behavior

Analyzing Hydrogen Diffusivity and Its Impact on Mechanical Behavior in Additively Manufactured FCC Alloys Using Nanoindentation

Comparative Study of Mechanical Properties and Deformation Mechanisms in Additively Manufactured Ti-6Al-4V and Ti-5Al-5V-5Mo-3Cr Alloys in Lattice Structure Topologies

Compositionally Graded Titanium Alloys: Correlation Between Local Microstructures and Mechanical Properties

Cryogenic Tensile Behavior of Carbon-Doped CoCrFeMnNi High-Entropy Alloys Additively Manufactured by Laser Powder Bed Fusion

Enhanced High-Temperature Performance of LPBF-Produced Inconel 718 Alloy through δ-phase control

Exploring Complex Microstructures in Additively Manufactured Alloys with Micro Mechanical Testing

Hard-Facing of Worn-Out Railway Sections with High Mn-Steel Using Wire Arc Additive Repair

High-Temperature Behavior, Ductility Loss, and Deformation Mechanisms Transition in Additively Manufactured Haynes 214

High-Throughput Nanomechanical Evaluation of Fe-Ni-Cr Alloys at Cryogenic Temperatures

In-Situ Measurements and Modelling of Thermal Stress Evolution in Additively Manufactured Bulk Metallic Glasses

In Situ HRDIC-EBSD Analysis of the Deformation Mechanisms of a Zn-1wt%Mg Alloy Manufactured by Laser Power Bed Fusion

Indentation Size Effects on Hardness of Ti-6Al-4V Made by Laser Directed Energy Deposition

Influence of Additive Friction Stir Deposition Process Parameters on Enhanced Mechanical Performance of IN625.

Investigating the Impact of Part Dimensions on Microstructural Integrity and Mechanical Performances in Optimized L-PBF Process

Length-Scale Phenomena in Creep Behavior of Laser Powder Bed Fusion (LPBF) 316H Stainless Steel

Linking Melt Pool Temperature Distributions and History to Microstructure Development During Laser Engineered Net Shaping (LENS) Additive Manufacturing

Mapping Nanoscale Origin of Superior Mechanical Performance of a W-Rich Alloy Processed by Laser Powder Bed Additive Manufacturing

Mechanical Behavior of Additively Manufactured Metals at Nanoscale: from Pillars to Architectures

Mechanical Properties and Microstructure Evolution of a Nanoparticle Reinforced Medium Entropy CoCrFeNi Alloy Produced by LPBF

Micromechanical Behavior of Additively Manufactured Multi-Layered Medium-Entropy Alloy

Micromechanical Properties of AlSi10Mg Produced by Laser Powder Bed Fusion

Precipitation Hardening of Laser Powder Bed Fusion Ti-6Al-4V

Size Effects, Mechanical Properties, and Yield Surface Evolution in Multiaxial Loading of Ti5553, Ti6Al4V alloys

Static and Fatigue Failure Mechanisms Governed by Multi-scale Dynamic Structural Evolution in Additive Friction Stir Deposition

Tailoring Grain Boundaries and Precipitates in the Refractory Compositionally Complex Alloy NbMoCrTiAl Via Selective Laser Melting

The Automated Quantification of Alpha Laths and Tensile Behavior in Ti-6Al-4V Processed With Laser Powder Bed Fusion

Understanding and Predicting the Deformation Behavior and Failure Modes in Micro-Architected Materials with Gyroid Topologies

Uniaxial-Load Stitch Modalities in Multi-Laser Powder Bed Fusion

Variations Across Length Scales in Additively Manufactured Ti-6Al-4V Parts: Challenges to repeatability and Reproducibility

Questions about ProgramMaster? Contact programming@programmaster.org