| About this Abstract |
| Meeting |
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Symposium
|
13th International Conference on the Technology of Plasticity (ICTP 2021)
|
| Presentation Title |
Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook |
| Author(s) |
Zbigniew Gronostajski, Pawel Widomski, Marcin Kaszuba |
| On-Site Speaker (Planned) |
Pawel Widomski |
| Abstract Scope |
The problem of the low durability of hot forging tools is widely known and undergoes many particular research actions.
Most often these studies have a narrow range of case studies instead of a universal approach. It was found that there is no single multifunctional method for increasing durability, but general directions for improving durability should be considered.
Currently, the main directions of durability improvement are surface engineering technologies, especially layers and coatings increasing wear resistance. Among them, hybrid solutions predominate, involving the use of several techniques on one tool in order to synergistically interact and obtain higher wear resistance. In this work, the results of many studies from the last several decades are gathered to present the possibilities of increasing the tool life in forging processes. The available methodologies, systems and approaches for selecting methods of durability improvement were also analyzed and their effectiveness evaluated. |
| Proceedings Inclusion? |
Definite: At-meeting proceedings |