50 Year’s Research and Development on Metal Forming and Joining

A Brief Review on Theoretical Aspects of Bar Straightening with Recent Developments in its Modelling, Simulation, Control System and Stabilisation

A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling

A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory

A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model

A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills

A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press

A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability

A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry

A New Non-destructive Testing Method Applied to Clinching

A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC)

A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes

A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study

A Plasticity Framework for Forming Applications

A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales

A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning

A Vision of Numerically Controlled, Autonomous Manufacturing and Metal Forming

Accurate Mapping of Thermal Camera Measurements on Planar Deformations

Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation

Achieving an Interference Fit between Two Rings during Composite Ring Rolling

Adding Value by Advancing Metal Forming

Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming

Advanced Design of Work Roll Contours for Different Roll Mill Types

Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R)

Advances and Challenges in Computational Modeling of Impact Welding Process

Advancing the Accuracy of Computational Models for Double-sided Incremental Forming

An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment

An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress

An Extended GTN Ductile Fracture Model for a Broad Range of Stress States

An Improved Hot Stamping Process for Titanium Alloys by Fast Heating

An Investigation on Formability of Ti6Al4V Alloy in the Three-layer Sheet Hot Stamping Process

Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming

Analysis of Cross-hardening by High Resolution Orientation Imaging

Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel

Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling

Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes

Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling

Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts

Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping

Analysis of Tube Spinning

Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage

Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts

Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling

Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes

Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking

Assessment of Calibration Strategies and Model Predictions for Damage in Formed Components

Augmentation of Plasma-based Impulse Generation with Rapid Chemical Reactions

Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts

Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet

Characterisation of Anisotropic Material Behaviour

Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures

Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets

Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part

Comparison on the Processing of Height Deviations of Disks from FEM and Real Rollings in Radial-Axial Ring Rolling

Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars

Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health

Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel

Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data

Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses

Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures

Control Theory for High End Press Brake

Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming

Data Preparation in the Digital Material Representation Based 3D Cellular Automata Model of Static Recrystallization

Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling

Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming

Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming

Deforming Behavior in Magnetic Pressure Parallel Seam Welding

Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching

Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter

Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting

Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets

Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments

Development of a New Printing Method Using Soft Material Tools

Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets

Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism

Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products

Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum

Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization

Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions

Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet

Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression

Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes

Effect of Bending Intensity on Straightness in Spinner Straightener

Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel

Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips

Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion

Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature

Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test

Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test

Effects of Press Ram Vibrations on the Production Quality

Effects of Servo Press Forming on Various Strain Path Failures

Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts

Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening

Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging

Estimation and Prevention of Strain Localization in Shear Tests

Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties

Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression

Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test

Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation

Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed

Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates

Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes

Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths

Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability

Experimental Study and Modelling of Stress Relaxation Ageing Behaviour and Post-form Mechanical Properties in Creep Age Forming of Al-Zn-Mg Alloy

Experimental Study of Asymmetric Rolling of Aluminum Alloys

Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion

Experimental Study on the In-plane Torsion Test for Sheet Metal

Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5

Exploring the Fragmentation of Surface Films during Solid State Welding

Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section

Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering

Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates

FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes

FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness

Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch

Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets

Finite Element Simulation and Punch Design for Tube Hydro-piercing

Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation

Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium

Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process

Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding

Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube

Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment

Formability of Functional Corrugated Cup

Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging

Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis

Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming

Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating

Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy

Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences

Friction Based Solid State Recycling: An Industry-ready Technology?

Friction Law in Cold Metal Forming

Friction Stir Welding Applied in Joining of Armor Steel

From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures

Full-field strain measurement in multi-stage shear cutting: High-speed camera setup and variational motion estimation

Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications

Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies

General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching

Grain Size Effect on Formability in Electromagnetically-assisted Micro-bulging of Pure Titanium Sheet

Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation

Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation

Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events

High-speed Material Characterization Using an Instrumented Forging Hammer

High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition

Hole Expansion Simulation of Steel Sheet Considering Differential Hardening

Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes

Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy

Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots

Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets

Impact of the Temperature Field of a C38 Steel Slug on its Thixoforging: Experiments and Simulations

In-plane Stretch-bending Test for Determination of Large-strain Workhardening and Fracture of Sheet Metals

In Search of the Perfect Sheet Metal Forming Tribometer

Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes

Influence of Axial Feed-rate on Shape and Thickness Changes during Multi-pass Tube Spinning: Experiments and Modelling

Influence of Forming Conditions on Metal Flow and Lubrication in Cold Backward-cup Extrusion

Influence of Material Delivery Condition on Residual Stresses and Part Properties during Forward Rod Extrusion

Influence of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process

Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears

Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets

Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075

Influence of Ultrasonic-assistance on the Forming Limits of Steel

Innovations through Collaborative Research

Innovative Simulation Strategy for the Mastering of Tribological Surface Transformations

Introduction of a New Method for Continuous Aluminum Hot Extrusion

Investigating Plastic Anisotropy of Al7079 Using Crystal Plasticity Simulations

Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring

Investigation of an Integrated Process for Bending and Cross Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity

Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels

Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission

Investigation of Forward–Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub

Investigation of Machine Learning Models for a Time Series Classification Task in Radial-axial Ring Rolling

Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming

Investigation on the Whole Forming Process of Super-large Flat Ring

Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis – A New Temperature Compensation Method

Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect

Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints

Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements

Machine Learning Based Prediction and Compensation of Springback for Tube Bending

Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process

Manufacturing Processes of Non-metallic Materials

Mathematical Model and Quantitative Analysis of Residual Stress Hole during Laser Shock Peening

Mechanical Properties of Aluminum-stainless Steel Bimetal Composite Fabricated by Extrusion Process

Metal Foils for Bipolar Plates – Correlation of Initial Grain Size and Forming Behavior of 316L

Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook

Microstructural Influences on Grain Boundary Sliding in High Purity Aluminum

Microstructure Evolution during Isothermal Forging of 7A85 Aluminum Aviation Component

Microstructure Informed Deformation and Fracture Model for High-strength Steels

Multi-objective Optimization of Elbow-bar Transmission Mechanism Based on Virtual Prototyping

Neural Network Surrogates Model for Metals Undergoing Yield Point Phenomena within Finite Element Analysis

New Generation Press Hardening Steels with Tensile Strength of 1.7-2.0GPa and Enhanced Bendability

New Methods for Fracture Detection of Automotive Steels

Non-isothermal modeling of static recrystallization in hydroformed steel tube using a coupled Cellular Automata and Finite Element model

Nonlinearity of the Crystal Yield Function in the Rate-independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy

Novel Roll Bonded Stainless Steel / Boron-steel Multilayer under Hot Stamping Conditions

Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit

Numerical Modeling of Ductile Damage during Metal Forming: State of the Art and Future Challenges

Numerical Modelling and Deformation Mechanics of the English Wheel Process

Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis

Numerical Simulation of Pipe Bending Supported by Hydraulic Pressure for Manufacturing Butt-welding Fittings

On Edge Crack Initiation of an Aluminum Sheet Metal

On Sampling Discrete Orientations for Texture Representation in Aggregates with Varying Grain Size

On the Characterization of Fracture Loci in Thin-walled Tube Forming

On the Convexity Bound of the Generalized Drucker's Yield Function CB2001 for Orthotropic Sheets

On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet

On the Geometrical Accuracy in Incremental Sheet Forming

On the Newly Proposed Shear Constraint for Orthotropic Plasticity Modeling of Sheet Metals

On the Potential of Machine Learning Algorithms to Predict the Plasticity of Sheet Metal

Open-die Forging of Copper Cone

Optimization of Lattice Structures for Additively Manufactured Interpenetrating Composites

Optimization of Open-die Forging Using Fast Models for Strain, Temperature and Grain Size in the Context of an Assistance System

Oscillation-free Determination of Material Properties at High Strain Rate

Penetrating Tool Friction Stir Incremental Forming Using Alternating Tool Path Direction

Phase-field Modelling of Ductile Fracture to Describe Edge Conditions in Local Formability Studies

PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization

Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States

Plasticity and Ductile Fracture of Ultra-high Strength Steel Sheets under Complex Stress State: Experiments and Modeling

Possibility of Shear Forging as the Third Basic Process of Cold Forging

Pre-forging Shape Design Using Conformal Mapping Method

Prediction on Microstructure of Large Scale Hot Forged Ni-based Super Alloy

Predictive Model for the Strength of Self-piercing Riveted Joints

Professor Ruan-An Extaodinary Pioneer within the Global Scientific Network Metal Forming

Professor Ruan and the International Cold Forging Group (ICFG)

Professor Z.R. Wang's Contributions to Metal Forming Theory, Technology and Education

Prof. Xue-Yu Ruan and His Academic Life

Prof. Yasuhisa Tozawa's Achievements in the Field of Metal Forming

Pushing Forward the Limit of Transformation-induced Plasticity (TRIP) Effect: Nnew Strategies in Mechanically Metastable Alloy Design

Recent Advances in Sheet and Tube Hydroforming

Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming

Recent Developments of Vaporizing Foil Actuator Technique for Manufacturing Applications

Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies

Reducing Aluminum Extrusion Transverse Weld Process Scrap

Relating Microstructure to Deformation in Al Alloys via Multiscale Electron Microscopy

Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container

Research of Press Forming of CFRTP under the Control of a Distribution of Temperature and Blank Holder Force

Research Progress on Advanced Forming and Performance Strengthening of Complex Thin-walled Aluminum Alloy Components

Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation

Rim Thickening of Disk-like Parts Using Spinning

Robotic Roller Forming Process and Strategies to Eliminate Geometrical Defect of Edge Waves

Roll Forming of Cup with Curved Rotary Profile

Self-optimized, Intelligent Open Loop Controlled Steel Strip Straightening Machine for Advanced Formability

Self-piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening

Shaping of Sharp-edged Design Elements by Electromagnetic Forming

Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity

Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

Simulations of Grain Growth with Arbitrary Grain Boundary Energy

Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet

Spot Butt Friction Stir Welding of Thin Stainless Steel Sheets

Statistical Analysis of Microscopic Strain Localization and Its Strain Level Dependence

Strain-rate-sensitivity Calibration of Aluminum Alloy Sheet by Electromagnetic Flanging of Circular Hole

Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect

Strength Prediction Model for Line Pipe Steels Subject to Multiple Deformation Paths

Stress-based Ductile Fracture Criterion for Nonlinear Strain Paths with Model Calibration

Stress-relaxation Age Forming of A Component with Complex and Large Curvatures: Simulation and Manufacturing

Study of Hydrogen Embrittlement Behavior of Hot-stamped Ultra-high Strength Steel

Study of the Influence of the Mixed-grain Structure on the Microscopic Deformation Behavior of 316LN Steel

Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-joined Products and Analysis of Joining State

Study on the Effect of Embossing on the Bending Properties of High Strength Sheet Metals

Study on the Transferability of Rolling with Ordered Texturing Roll

Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-frequency Torsional Oscillation

Surrogate Modelling of Search Range in Polyhedron Flow Stress Model Identification with Inverse Analysis and Cylindrical Compression Test

T8 Heat Treatment Effect on Wear Behavior and Microstructure of Cryo and RT Ecaped Al 6063

Temperature and Deformation Modeling for the Friction Stir Welding Process in AZ31 Magnesium Alloy

Temperature Dependent Fracture Loci Of AZ31 Magnesium Alloy Sheets

Testing Method of Anti-galling Ability of Lubrication Coatings in Multi-stage Cold Forging

The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire

The Effect of Crystallographic Texture Gradients on the Mechanical Response of Aluminum Automotive Extrusions

The Effect of Interface Cohesion on Layer Stability during Accumulative Roll Bonding of Cu/Ta Multilayers

The Effect of Temperature on Strain-induced Austenite to Martensite Phase Transformation in SS 316L during Uniaxial Tension

The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming

The Effects of the Shearing Speed on the Sheared Edge Quality and Edge Cracking

The Evolution of Deformation Microstructures and Strain Hardening during Constrained Sliding with Implications for Metal Forming and Cutting Processes

The Fundamentals of Microparticle Impact Bonding in Metals, Alloys, and Advanced Materials

The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy

The Local Strain Evolution for Structured Sheet Metals during Uniaxial Deformation

The Process Design to Control the Yield Ratio of Yield-Ratio-Control-Steel on Both Wire Production and Forging Process

The Study of Energy Absorption of Dual-material Tailored Plane Strain Sheet

Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal

Three-dimensional Analysis of Strip Rolling by Coupling Elastic Deformation of Rolls and Rolling Mills

Towards an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys

Towards Room-temperature Forming of Magnesium Sheet Alloys

Transcription of Mirror-finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming

Tribological Conditions in Hot Bending of 22MnB5 Tubes

Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population

Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation

Ultrasonic Forming - Alternative to Orbital Riveting for Small Bimetallic Components

Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex-situ Experiments and Full-field Crystal Plasticity Modeling

Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-forming

Using Plasticity for Making High-performance Nanostructured Composites

Vacuum Hot-roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer

Validation of Automatically Generated Forging Sequences Using FE Simulations

Vision 2030: A Vision for America’s Science and Engineering Enterprise & Relevance to Advanced Manufacturing

Welding of Aluminum in Chip Extrusion

Work Hardening and Fracture Strain Measurement of Hardened SKD11 Steel Using Shear Punching Test

"Learning by Seeing": Estimating Metal Plasticity Parameters Using In Situ Observations of Cutting and Indentation

Questions about ProgramMaster? Contact programming@programmaster.org