A Combinatorial Approach of Alloy Modification and Heat Treatment Strategies, Towards a Tailored Microstructure with Improved Mechanical Properties of Hot Work Tool Steel

A Comparative and Experimental Study on the Effect of Heat Treatment Cycles for PBF Ti6Al4V

A Comparative Study on the Microstructure and Texture Evolution of L-PBF and LP-DED 17-4 PH Stainless Steel during Heat Treatment

A Control of Surface Quality in Selective Laser Sintering Additive Manufacturing with Reclaimed Polyamide Materials

A High Throughput Additive Manufacturing and Characterization Approach for Evaluating Structure-property Relationships in Multiphase High Entropy Alloys

Additive Manufacturing of Magneto-active, Shape Programmable Thermoset Composite Laminates via Reactive Extrusion

Additively Manufactured Hastelloy-X: Effect of Post-process Heat Treatment on Microstructure and Mechanical Properties

Additively Manufactured Haynes 230 by Laser Powder Direct Energy Deposition (LP-DED): Effect of Heat Treatments on Microstructure and Tensile Properties

An Initial Evaluation of Process-property Relations for FDM produced 316L Stainless Steel

Analysis of Horizontally Graded Titanium-Tantalum Using Laser Powder Bed Fusion Additive Manufacturing

Analysis of Residual Stress Reduction of in situ Annealed LPBF 316L Stainless Steel

Analysis of Residual Stress Reduction of In Situ-Annealed AM 316L Stainless Steel

Binder-free Additive Manufacturing of Ceramics Using Hydrothermal-assisted Transient Jet Fusion

Ceramic Binder Jetting Additive Manufacturing: Effects of Granulation on Properties of Feedstock Powder and Printed and Sintered Parts

Ceramic On-demand Extrusion (CODE) of Zirconium Diboride

Challenges during laser powder bed fusion of a near-alpha titanium alloy - Ti-6242Si

Characterization of Copper Coupons Made via Laser Powder Bed Fusion

Characterization of n-type Bismuth Telluride Manufactured via Selective Laser Melting

Characterizing Internal Porosity of 3D-printed Fiber Reinforced Materials

Comparison of Component Properties and Economic Efficiency of the Arburg Plastic Freeforming and Fused Deposition Modeling

Creating Conformable Lithium Batteries Using Selective Laser Sintering

Development of Effective Powder Layer Thickness for Different Materials and Process Conditions

Direct-writing SiC with Micro-cold Spray: Particle Agglomeration Dependence on Film Density

Direct 3D Printing of Transparent Spinel Ceramics via One-step Laser Direct Deposition

Directed Energy Deposition Additive Manufacturing of Nickel Aluminum Bronze: Temperature Dependent Properties for Predicting Distortion

Dry Aerosol Deposition of Barium Neodymium Titanate Dielectric Ceramic

Dry Aerosol Deposition of Silicate Coatings on Space Relevant Polymeric Substrates

Effect of Heat Treatment on the Tensile Behavior of 17-4 PH Stainless Steel Additively Manufactured by Metal Binder Jetting

Effect of powder characteristics on tensile properties of additively manufactured 17-4 PH stainless steel

Effect of process parameters on the vibration properties of PLA structure fabricated by additive manufacturing

Effects of Build Orientation and Heat Treatment on Neutron Irradiation Hardening in Inconel 625 Fabricated via Laser Powder Bed Fusion

Effects of Fiber Length Evolution in Carbon Fiber-reinforced Epoxy Composites for Direct Ink Writing

Effects of Heat Treatment and Fast Neutron Irradiation on the Microstructure and Microhardness of Inconel 625 Fabricated via Laser-Powder Bed Fusion

Effects of Powder Reuse and Spatial Location Dependency on the Powder Characteristics and Defect Structure of Additively Manufactured Ti-6Al-4V Parts

Effects of Stripe Width on the Porosity and Mechanical Performance of Additively Manufactured Ti-6Al-4V Parts

Electron Beam Selective Melting of IN738LC Alloy; Defects Control, Microstructural Characterization and Mechanical Properties

Energy Density Effect on the Keyhole and Lack of Fusion Porosity during Laser Powder Bed Fusion Process

Evaluating the Effect of Z-pinning parameters on the Mechanical Strength and Toughness of Printed Polymer Composite Structures

Evaluating the Efficacy of X-ray Computed Tomography for Flaw Detection in Laser Powder Bed Fusion Additive Manufacturing using Automated Optical Serial Sectioning

Evaluation of Early Fatigue Damage Detection in Additively Manufactured AlSi10Mg

Exploring the Structure-property Relationships of WxCoCrFeMnNi Graded High Entropy Alloy

Exploring the Structure-property Relationships of (Ti, TiAl6V4)xCoCrFeMnNi Graded High Entropy Alloy

Fabricating Silicon Nitride Parts Using the Ceramic On-Demand Extrusion ( CODE) Process and Pressureless Sintering Method

Fatigue Properties of 3D Printed Maraging Steel

Feasibility Study on Digital Light Processing of Metamaterials with Nested Structures

Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester

Fracture Behavior of FDM Polymer Materials: Impact of Sample Size, Notch, and Element Layout

Generation and Characterization of Parameter- and Process-induced Defects in Powder Bed Fusion Additive Manufacturing, and Impact of Mechanical Properties Thereof

Geometry Limitations of Indirect Laser Sintering of Alumina

Improving Vat Photopolymerization Part Performance via Thermally Activated Bond Exchange

Increasing Productivity in Laser Powder Bed Fusion Additive Manufacturing of AlSi10Mg

Influence of Process Conditions on the Thermal Conductivity of Selective Laser Melted AlSi10Mg

Inkjet Printing Graphene for Devices: From Contacts to Functional Layers

Investigating Thermally Induced Phase Separation as a Composite Powder Synthesis Technique for Indirect Selective Laser Sintering

Investigation into Laser Sintering of PEEK Using Commercially Available Low Powder Bed Temperature Machine

Investigation of Defects Formation Mechanism and Its Reduction in Selective Laser Melting Fabricated Al7075 Alloy

Investigation of Machinability of Additively Manufactured Metal Alloys

Investigation of Mechanical Properties of Parts Fabricated with Gas- and Water-atomized 304L Stainless Steel Powder in the Laser Powder Bed Fusion Process

Investigation Towards AlSi10Mg Powder Recycling Behavior in the LPBF Process and Its Influences on Mechanical Properties

Laser Powder Bed Fusion Additive Manufacturing of Copper Vapor Chambers

Linear elastic finite element calculations of short cracks initiated from the defects: effect of defect shape and size

Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12

Mapping the Process Window for Reliable Metal Droplet-on-demand Manufacturing

Material Properties of 17-4PH Stainless Steel Fabricated by Atomic Diffusion Additive Manufacturing (ADAM)

Measurements and Predictions of Residual Distortion in AM Ti-6Al-4V Specimens

Mechanical Properties of 304L Stainless Steel Parts Fabricated by Laser Foil Printing

Mechanical Properties of High-performance Plastic Polyether-ether-ketone (PEEK) Printed by Fused Deposition Modeling

Metal Additive Manufacturing with Bessel Beams

Methodology for Determining Design Rules for Helical Channels in Glass Components Produced via Selected Laser Sintering

Methods of Automating the Laser-Foil-Printing Additive Manufacturing Process

Microhardness and Mechanical Properties in Additively Manufactured Inconel 718

Microstructure and Mechanical Properties in Polymer Powder Bed Fusion Processes

New Gold Conductive Ink Formulation with Enhanced Cohesion for Material Jetting

Operando Diffraction of Phase Evolution in Selective Laser Melting of Elemental Blends of Al-Sc and Al-Sc-Zr

Particle-Melt Pool Interactions in Multi-Material Laser Based Directed Energy Deposition

Powder Bed Fusion Additive Manufacturing of Curved-surface AlSi10Mg Parts: Surface Finish, Geometrical Deviation, and Microstructure

Powder Reuse Effects on the Tensile Behavior of Additively Manufactured Inconel 718 Parts

Powder Spreadability Measurements to Predict Performance in SLM Printers

Predict Adhesive Strength of Repair of Thermoplastic Component Based on Polymer Healing Theory

Pressure Control During Bronze Infiltration of Binder-Jet Printed Stainless-Steel to Create Metal Microchannels

Printability Assessment of Cellulose-Based Polymer Structures Using Direct Ink Writing

Process Optimization and Mechanical Properties of Laser Powder Bed Fusion Built Haynes 230

Processing of Soda-lime Glass In Laser-based Powder Bed Fusion

Residual Stress Measurements via X-ray Diffraction Cos-α Method on Various Heat-Treated Inconel 625 Specimens Fabricated via Laser-Powder Bed Fusion

Selective Binder Jetting: Enhancing Part Quality through Fabrication of Shelled Geometries

Selective Laser Flash Sintering: Processing Conditions

Selective Laser Melting of Metal Cooling Devices onto Silicon

Spatial Inhomogeneity of Build Defects Across the Build Plate in Laser Powder Bed Fusion

Strain Energy Approach to Estimating Stress-life and Strain-life Behavior of Additive Manufactured Austenitic Stainless Steels

The Effect of Fused Filament Fabrication Thermal Post-Processing Conditions on the Mechanical Strength and Dimensional Accuracy on ULTEM® 1010

The Effect of Stress Intensity Factor on Fatigue Life of Additive Manufactured Parts Made from Polymer

The Influence of Grain Size Distribution of PA12 on Key Steps of the Polymer Laser Sintering Process

The Laser Powder Bed Fusion Process Development of 17-4 PH Stainless Steels With Pulsed-Wave Lasers

The Material Testing of Nanoparticle Doped 3D Printed ABS to Decrease Resistance and Create a Conductive Pathway

Towards a Defect-based Process Map

Use of Powder with Non-spherical Morphology in a Laser Powder Bed Fusion Additive Manufacturing Process

(LATE REG) Microstructure Pore-stress Interactions and Their Influence on Scatter in AM Fatigue Life Data

Questions about ProgramMaster? Contact programming@programmaster.org