 3D Bio Printed Biodegradable Composite Material for Pediatric Craniomaxillofacial Implants |
| 3D Metal Nanoparticle-polymer Composites: Strategies for Integrating Metal Nanoparticles with Two-photon Polymerization Process |
| 3D Printed Intelligently Graded Functional Stiffness Foam for Sturdier Multi Stiffness Materials |
| 3D Printing of Complex Wire Geometries for Tailored Resistance Response |
| 3D Printing of Continuous Stainless Steel Fiber Reinforced Polymer Composites |
| 3D Printing of Gel Polymer Electrolytes via Vat Photopolymerization for Lithium-ion Batteries |
| 3D Printing of High-performance Carbon Fiber Composites via Modified Drop-on-demand Method |
| 3D Printing of Passive Microfluidic Flow Mixers using Triply Period Minimal Surface Microlattice Structures |
| A Case Study of Cognitive Workload and Design Knowledge Gaps in Hybrid Manufacturing Teams |
| A Case Study on Lightweight Design of a Robot Leg: Integrating Topology Optimization and Lattice Configuration |
| A Comparison of Mechanical Properties from Natural and Process Induced Interfaces in Filament Extrusion Additive Manufacturing of Polymer Blends |
| A Comparison of Microstructure and Mechanical Performance of Inconel 718 Manufactured via L-PBF, LP-DED, and WAAM Technologies |
| A Comparison of the Mechanical Behavior of AlSi7Mg Alloy Produced Through Additive Manufacturing and Subjected to Different Heat Treatment and Aging Conditions |
| A Data-driven Distortion Compensation Method and the Necessity to Consider Spatial Effects in Binder Jet Parts |
| A Data-driven Reverse Shape Compensation Method to Reduce Large Deformation in Binder Jet Parts |
| A Data-driven Surrogate Model for Time-dependent Scanwise Thermal Simulations of Laser Powder Bed Fusion Parts |
| A Data Driven-based Geometric Compensation Method for Laser Powder Bed Fusion |
| A Data Driven-based Geometric Compensation Method for Laser Powder Bed Fusion |
| A Framework for Physics-guided Machine Learning to Extract and Transfer Process-structure-property Knowledge in Additive Manufacturing |
| A Hybrid Aerosol Jet Printing and Electrochemical Deposition Process for Manufacturing Multi-layer Inductors and Transformers |
| A Local Preheat Temperature Dependent Stochastic Finite Element Heat Source Model for Inconel 718 Laser Powder Bed Fusion |
| A Machine Learning Approach to Part Scale Microstructure Predictions in LPBF |
| A Novel 4D Printing Approach for Freeform Electronics |
| A Novel Coating Method Used to Enable Multilayer Structures with Microscale Selective Laser Sintering |
| A Novel Metric for Geometric Accuracy Quantification using Point Clouds in Additive Manufacutring |
| A Physics-guided Data-driven Model for Enhanced Temperature Prediction and Control of LPBF Additive Manufacturing |
| A Pilot Study on Temperature Monitoring and Morphology of the Meltpool in EB-PBF of Copper using Numerical and Analytical Models |
| A Preliminary Understanding of Process-property Effects on the Thermal Response via High-throughput Finite Element Models of Wire Arc Direct Energy Deposition |
| A Review on the Joining Mechanisms of Multiple Materials using Additive Manufacturing |
| A Robust Local Preheat Temperature Dependent Stochastic Finite Element Heat Source Model for Inconel 718 Laser Powder Bed Fusion |
| A Scientific Artificial Intelligence (Sci-AI)-based Concurrent Multiscale Simulation Framework for Accurate Temperature Prediction of Large-scale Metal Additive Manufacturing |
| A Small Volume, Local Shielding Gas Chamber with Low Gas Consumption for Laser Wire Additive Manufacturing of Bigger Titanium Parts |
| A Solid Free Form Fabrication Equipment to Manufacture Axisymmetric Parts with Improved Surface Quality |
| A Spherical Test Artifact to Evaluate Three-dimensional Form Accuracy for Wire Arc Additive Manufacturing |
| A Study of Additively Manufactured Ti-6Al-4V ELI Surface Roughness Coupons with Differing Processing Parameters |
| Absorptivity Behavior of High Reflectivity Aluminum and Copper Alloys During Laser Powder Bed Fusion |
| Accelerating Design and Additive Manufacturing of Polymer Matrix Composites |
| Acoustic Mechanisms of Laser Powder Bed Fusion through an Analogous Whistle Model |
| Adapting a Conventional Design for Additive Manufacturing Workflow to Account for Continuous Carbon Fiber Reinforced Parts |
| Adaptively Sampled Distance Functions: A Unifying Digital Twin Representation for Additive Manufacturing |
| Additive Compliant Mechanisms for Deployable Space Structures |
| Additive Manufacturing and the Moving NDT Target |
| Additive Manufacturing of High Entropy Shape Memory Polymer Blends |
| Additive Manufacturing of Hybrid Sandwich Sheets by Laser Powder Bed Fusion of Metals |
| Additive Manufacturing of Modular Soft Stretchable Elastomers for Adaptive Dissipative Structures |
| Additive Manufacturing of ODS Steels using Powder Feedstock Atomized with Elemental Yttrium |
| Additive Manufacturing of Person Specific Diabetic Foot Insoles with Adjustable Cushioning Properties using TPMS Lattice Structures |
| Additive Manufacturing of Self-healing Polymers as a Pathway for Environmental Stability |
| Additive Manufacturing of Shape-conforming Battery Components from Lunar and Martian Soil |
| Additive Manufacturing of Si-SiC Cermets by Binder Jetting with Si infiltration – Process and Material Properties |
| Additive Manufacturing (AM) Lattice Segmentation and Analysis Enabled through Deep Learning |
| Additively Manufactured Inconel718-Methanol Heat Pipe: Fabrication and Low Temperature Thermal Testing |
| Additively Manufactured LiCoO2-based Photocurable Resin as Positive Electrode for Lithium-ion Batteries |
| Additively Manufactured Lunar Rover Wheel Case Study |
| Additively Manufactured Molds for Large Gyroid Structures Cast from Concrete |
| Advancing Sodium-ion Battery Technology for Both Terrestrial and Extraterrestrial Applications through 3D Printed Electrolytes |
| Advancing the Process Window for Reliable Metal Droplet-on-demand Manufacturing |
| AI-driven In Situ Detection of Keyhole Pore Generation in Laser Powder Bed Fusion |
| AM Process Development of NASA HR1 Alloy using Laser Powder Direct Energy Deposition (LP-DED). |
| Amorphous Magnetic Alloys Printed from Carbonyl Based Metal-organic Decomposition Inks |
| An Adaptive Meshing Framework using Octree Data Structure for Voxel Based Meshes |
| An Effective Method for Predicting the Mechanical Properties of Parts with Site-specific Microstructure |
| An Ensemble Kalman Filter Method for Laser Powder Bed Fusion Temperature Estimation, Augmented with Adaptive Meshing and Joint Estimation of the Absorptivity |
| An Evaluation of a Programmatic Method for the Generation of Finite Element Event Series for Additive Manufacturing Against Machine Print Paths |
| An Experimentally-tuned Finite Element Model for Predicting Sintering Deformation in Binder-jet Additive Manufacturing |
| An Ultrasonic Technique to Determine the Onset of Localized Sintering in Additive Manufactured Ceramics |
| Analysis of Flow Additives in Laser-based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics |
| Analysis of Porosity in LPBF SS316L by X-Ray Computed Tomography |
| Analytical Modeling of Cooling Rates in PBF-LB/M of Bulk Metallic Glasses |
| Anticounterfeiting Signatures for Additively Manufactured Parts via Electromechanical Impedance Measurements |
| Application of In-situ Process Monitoring to Optimise Laser Parameters during the L-PBF Printing of Ti-6Al-4V Parts with Overhang Structures |
| Assembly-free Hybrid Printing of Microfluidic Devices for Biosensing |
| Assessing the Impact of Melt Pool Variability on Fatigue Life in Laser Powder Bed Fusion |
| Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide 613 Composites Made by Laser Sintering |
| Automated Fiber Length Measurement for 3D Printed Polymer Composites, Including Identification and Measurement of Non-trivially Placed Fibers |
| Automated Layer Identification in Large Area Additive Manufacturing (LAAM): A Comparison of Image Thresholding and Edge Detection Techniques |
| Bayesian Data-augmentation of Thermal Models for Design of Nb-Ta-W Alloys |
| Behavior of Additively Manufactured Plate-lattice Structures in Quasi-static, Dynamic, and Ballistic Testing |
| Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled through Fused Granule Fabrication Additive Manufacturing |
| Beyond Throughput-resolution-flexibility Tradeoffs with Mutliplexed Fused Fabrication |
| Binder Evaporation During Powder Sheet Additive Manufacturing |
| Binding and Alloying Properties of a Solid-free Organic Binder in Binder Jetting Additive Manufacturing of Steel |
| Bio-inspired AM Structure using Co-extruded Continuous Carbon Fibre Reinforcement |
| Building Blocks for Understanding Triply Periodic Surfaces: A Visual and Tactile Learning Aid |
| Building Equation-based Lattice Structures using Large Minimum Feature Size AM Processes |
| Calibration Method for Combined Structured Light and Additive Manufacturing Systems |
| Catalog of Triply Periodic Minimal Surfaces, Equation-based Lattice Structures, and Their Homogenized Property Data |
| Challenges in Wire-Arc Additive Manufacture of Nickel Aluminum Bronze |
| Characterization and Validation Experiments for a Binder Jet 3D Printing Modeling Framework |
| Characterization of Thermoset Feedstocks for Laser Powder Bed Fusion |
| Characterizing Thermomechanical Performance of Large-format Printed Composite Polymer Structures |
| CIFEM: Elucidating the Role of Local Preheat Temperature on Multi-track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion |
| Co-design of 3D Printing, Parts and Microstructure in High-temperature and High-pressure Heat Exchangers |
| Coaxial Color Channel Focus Evaluation
to Estimate Standoff Height
in Directed Energy Deposition |
| Coaxial Photodiode Signal Trends and Predictions: Power, Speed, Spot Size, Material and Time |
| Comparative Analysis of Process Stability in PBF-LB/M: (Thermal) Highspeed Imaging vs. Melt Pool Monitoring using Novel Gas Mixtures |
| Comparative Success of EBM and SLM for Fabrication of Lattice Structures in Metal Orthopaedic Implants |
| Comparing the Effects of Different Chemical Treatments on Surface Texture and Fatigue Behavior of U-notched Additive Manufactured AlSi10Mg |
| Comparison of High-resolution Aerosol Jet Printing of Silver Inductors on Rotary and Linear Stages |
| Comparison of Layerwise Preheating and Post Heating Laser Scan on the Microstructure and Mechanical Properties of L-PBF Ti6Al4V |
| Comparison of Process Control Methods for Wire-arc Directed Energy Deposition of Low Carbon Steels with In-situ Temperature Measurement |
| Comparison of Surface Texture from Various Surface Morphology Techniques for Evaluating As-built Ti6Al4V Laser Powder Bed Fusion |
| Comparison of tensile and compressive behavior of triply periodic minimal surface lattices fabricated by laser powder bed fusion |
| Complex Laser Beam Shaping for Improved Process Control in Metal Additive Manufacturing |
| Compositional Variation Effect on the Microstructure and Nanomechanical Properties of Additively Manufactured AlCuFeNiTi High Entropy Alloy |
| Compositionally Graded Transition from Tungsten to Ferritic-martensitic Steels via Directed Energy Deposition |
| Computer Vision for Powder Mass Flow Rate Measurement in Blown Powder Directed Energy Deposition |
| Continuous Fiber Reinforced Composites: Design for Additive Manufacturing |
| Control of Track Morphology in Digital Glass Forming |
| Controlling Chemical Composition Changes in Laser Powder Bed Fusion of AlSi10Mg |
| Convergence Studies of Ensemble Kalman Filter Accuracy at Estimating Powder Bed Fusion Temperatures as a Function of Measurement Resolution |
| Corner Effects on Fatigue for As-printed Surfaces in Alloy 718 |
| Cyber-informed Additively Manufactured Functionally Graded Materials and Structures |
| Data-driven Local Porosity Prediction in Laser Powder Bed Fusion via In-situ Monitoring |
| Data-driven Local Porosity Prediction in Laser Powder Bed Fusion via In-situ Monitoring |
| Data Management for Additive Manufacturing Process Monitoring |
| Data Pipelines for Direct Ink Write Digital Twins |
| Deformation Pattern of Cellular Mechanical Interface in a Bi-material Structure Fabricated by Material Extrusion Additive Manufacturing |
| Demonstrating Paraflow: Interactive Fluid Dynamics Simulation with Real-time Visualization for Augmented Resin 3D Printing |
| Depiction of Support Structures in Technical Drawings |
| Design and Integration of a Multi-modal Machine Safety Architecture for a Novel AM-CM System |
| Design for Internal Lattice Structures with Application in Additive Manufacturing |
| Design For(e!) Additive Manufacturing: In Search of a Comprehensive Design Challenge Suitable Across AM Education |
| Design of Lightweight 3D Printed Structures for the 7th Annual 3D Printed Aircraft Competition |
| Design of Spatially Varying Orientation Lattice Structures using Triply Periodic Minimal Surfaces |
| Design of Three-dimensional Complex Truss Metamaterials with Graph Neural Networks |
| Design Optimization, Multi-axis Additive Manufacturing, and Mechanical Evaluation of Continuous-fiber Composite Structures |
| Designing for Circular Economies: Creating Impact from Local Plastic Waste using Off-grid Containerized 3D Printers & Practice Based Learning |
| Designing for Cleanability: A Topology Optimization Approach for Electron Beam Melted Parts |
| Design, Analysis, Optimization, and Fabrication of
Porous/Heterogeneous Microstructures via Spline-based Volumetric Representations |
| Detecting Failures in Laser Powder Bed Fusion Additive Manufacturing of Complex Lattice Structures using Multi-sensor Data and Machine Learning |
| Detecting the Onset of Flash Event in Selective Laser Flash Sintering |
| Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process |
| Determination of Input Laser Energy for Melting Powder Layers of Various Thicknesses in High-speed PBF-LB/P using Near-infrared Laser and Absorbent |
| Developing Additively Manufactured Iron Powder-filled PLA Composites |
| Development and Analysis of Direct-write Photopolymer, Multi-material Manufacturing Process |
| Development of 3D Printable Part Library for Easy to Manufacture Components for Educational and Competetive Robotics |
| Development of a Testbench for Additive Manufacturing Data Integration, Management, and Analytics |
| Development of Artificially Tuned Microstructure using Interpenetrating Lattices Fabricated by Laser Powder Bed Fusion |
| Development of Dual-head MetalJet System for Drop-on-demand Multi-metal Deposition |
| Development of Flexible Circuits using Epoxy-based Flexible Electrical Conductors |
| Development of High Filled Bio-based Composites for Sustainable, Low-cost Feedstock: Processing Effects on Porosity and Fiber Alignment |
| Development of Joint Manufacturing and In-line Metrology System for the Patterning of 3D Holographic Structures in Roll-to-roll Processes |
| Development of Multimaterial Additive Manufacturing Systems for the Embedded Electronics |
| Development of Soft Gripper Pneumatic Control System Based on Deep Reinforcement Learning |
| Digital Model Generation Strategy for Printing Miniaturized Replica of Historical Cast Iron Objects - A Use Case Study |
| Directed Energy Deposition of Stainless Steel 304L to Inconel 625 Gradients: Print Strategies and Defects |
| Directional Dependence of IN718 Gyroid TPMS Lattices Fabricated by Selective Laser Melting |
| Discovery of Next-generation Battery Electrodes using Topology Optimisation |
| Dissimilar Vacuum Brazing of Additive Manufactured 17-4PH Stainless Steel to Conventional 304 and 17-4 Stainless Steel by BNi-2 Brazing Filler Material |
| Distilling Thermal Signatures from Reduced Order Physics Models for Electron Beam Powder Bed Fusion Processing |
| Distortion and Residual Stress Mitigation of Large Parts for Wire-arc Additive Manufacturing |
| Distortion and Residual Stress Mitigation of Large Parts for Wire-arc Additive Manufacturing |
| Distributed Optical Fiber Testing for Additive Manufacturing |
| Does Finer Powder Get Deposited First in Powder Bed? – A Comparative Study using Simulation and Experimental Techniques |
| Double-pulse Femtosecond Laser Sintering of Metal Nanoparticles on Flexible Substrate |
| Dreaming of Data: Examining Data Augmentation for Machine Learning in Additive Manufacturing |
| Dual-curing 3D Formation of Continuous Fiber Thermoset Composites |
| Dynamic Start Point Modification in Closed Contour Toolpaths for A Multi-robot Wire-fed Ded System |
| Effect of Binder Content on Ceramic Paste for Additively Manufactured Parts via Ceramic On-demand Extrusion |
| Effect of Heat Treatment on High-cycle Fatigue of Additively Manufactured 17% Chromium 4% Nickel Precipitation Hardened Stainless Steel |
| Effect of Heat Treatment on the Microstructure and Mechanical Properties of Monel K500 Alloy Fabricated via L-PBF and LP-DED |
| Effect of Heat Treatments on the Tensile Properties of Additively Manufactured 15-5 PH Stainless Steel |
| Effect of Initial Carbon Content on Tailoring the Mechanical Properties of Additively Manufactured Martensitic Ultra High-strength Steels |
| Effect Of Inter-Layer Dwell Time on Residual Stresses in Directed Energy Deposition of High Strength Steel Alloy |
| Effect of Post Thermal Processing Conditions on Physical and Mechanical Properties of LPBF Processed Inconel 718 |
| Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF) |
| Effect of Process Parameters on Microstructure and Properties for the Application of 316L Additively Manufactured Medical Device Components |
| Effect of Solidification Conditions on the Evolution of Dispersoids in a Ni-20Cr + 1 wt% Y2O3 ODS Alloy Fabricated with Laser Powder Bed Fusion |
| Effect of Surface State and Material on Surface Quality Enhancement by Dual Laser Powder Bed Fusion |
| Effect of Temperature on the Cohesiveness of Polymeric Powders: Implications on Spreadability |
| Effect of the Print Bed Temperature on Void Distribution and Fiber Orientation within the Microstructure of Short Carbon Fiber Reinforced/ABS Manufactured via Large Area Additive Manufacturing |
| Effectiveness of Ex-situ Heat Treatment of L-PBF AM 17-4PH Stainless Steel Specimens Intentionally Exposed to Different As-built Thermal Histories |
| Effects of Build Orientation and Heat Treatment on the Porosity Distribution and Morphology within Inconel 625 Fabricated via Laser Powder Bed Fusion |
| Effects of Double-pulse Waveform on Piezoelectric Inkjet Printing Speed |
| Effects of Fiber Alignment on the Thermomechnical Properties of Large-format Printed Composite Polymer Structures |
| Effects of Preheating and Multi-laser Melting of Refractory Alloys in Laser Powder Bed Fusion |
| Effects of Surface Roughness, Process Parameters, and Heat Treatments on the Fatigue Properties of Laser Powder Bed Fusion of 316L Stainless Steel |
| Efficient Thermomechanical Simulation for WAAM using Automated GPU-based Modeling |
| Efficient Thermomechanical Simulation for WAAM using Automated GPU-based Modeling |
| Electrochemical Stability of 3D Printed Separators and Gaskets for Shape-conformable Lithium-ion Batteries |
| Electroslag Strip Cladding for Additive Manufacturing |
| Elucidating Size and Location Effects on Green Density of Binder Jet Additive Manufactured Parts |
| Elucidating the Role of Local Preheat Temperature on Multi-track Melt Pool Morphology Variation for Inconel 718 Laser Powder Bed Fusion via CIFEM |
| Embedding Fiber Optic Sensors in Metal Components via Direct Energy Deposition |
| Embedding of Luminescent Pigments within 316L Stainless Steel Matrix by Laser Powder Bed Fusion for Optical Functionalities |
| Embedding Temperature Sensors with the Use of Laser-Foil-Printing Additive Manufacturing |
| Enabling Advances in Laser Powder Bed Fusion with In Situ Monitoring |
| Enabling Multi-material LPBF Printing via Electrostatic Powder Spreading of Patterned Powder Beds |
| Enabling Part-scale Melt Pool Prediction in Laser Powder Bed Fusion via a Global-local Thermal Process Simulation Model |
| Enabling Part-scale Melt Pool Prediction in Laser Powder Bed Fusion via a Global-local Thermal Process Simulation Model |
| End-to-end AI Models for Error Detection and Correction in Extrusion AM |
| Energy Flow (Bond Graph) Dynamic Modelling of Cartesian-frame FFF 3-D Printer Gantry |
| Engineering Hydrophobic Stainless Steel Nanocomposites |
| Enhancement of Profile Data for Repetitive Process Control Measurements in DED Additive Manufacturing |
| Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant Incorporation |
| Equalization of Metal Powder for Binder Jet Printing |
| Estimating Effective Stiffness of FFF Components based on Layer-by-Layer Raster Orientation obtained from Ultrasonic Waveform Analysis |
| Evaluating Residual Heat-driven Melt Pool Variation through GPU-based Thermal Process Simulation |
| Evaluating the Compressive Strength of AM Risers for Green Sand Metalcasting |
| Evaluation of the Performance of 3D Printed Cutting Guides for Canine Caudal Maxillectomy |
| Evolution of Creep Damage of 316L Produced by Laser Powder Bed Fusion |
| Experimental and Computational Study of Area Printing™ Additive Manufacturing: Inconel 718 and M300 Maraging Steel Density Improvement |
| Experimental and Finite Element Comparison of 3-axis and 5-axis Wire Arc Directed Energy Deposition |
| Experimental and Numerical Investigations on Dynamic Mechanical Properties of TPMS Structures |
| Experimental Characterization of Enhanced Fused Filament Fabricated Tall Thin-walled Structures Using Polylactic Acid (PLA) |
| Experimental Characterization of the Mechanical Properties of 3D Printed Bézier-based Lattice Beams |
| Experimental Evaluation of Hierarchical Functionally Graded Lattices Using Digital Image Correlation and Micro-CT |
| Experimental Investigations of Inhomogeneous Component Properties in Laser-based Additive Manufacturing of AlSi10Mg |
| Experimental Study of Cryogenic Directed Energy Deposition Conducted at -20°C |
| Experimental Validations of an Ensemble Kalman Filter Method for Powder Bed Fusion Temperature Estimation |
| Exploratory Study of In-space Wire Arc Additive Manufacturing with Modeling Approach |
| Exploring a Supervisory Control System Using ROS2 and IoT Sensors |
| Exploring Additively Manufactured Heterostructures of Functional Materials: Focus on Interfaces |
| Exploring Capillary Suspension Technique to Develop 3D Printable Oxide Based Lithium Electrolytes for All Solid-state Batteries by Direct Ink Writing |
| Exploring IN718 Alloy Production with Bidirectional Raster and Stochastic Spot Melting Techniques using an Open-source Electron Beam Melting System |
| Exploring the Effects of Oscillatory Deposition Paths on Wire Arc Additive Manufacturing (WAAM) of Al5Mg |
| Fabrication of 3-Dimensional Flexible Tactile Sensor using Pressure Sensitive Material |
| Fabrication of Crack-free Aluminum Alloy 6061 Parts using Laser Foil Printing Additive Manufacturing Process |
| Fabrication of Solid-state Electrolytes Using 3D Printing for Lithium Metal Batteries |
| Fabrication of Superhydrophobic Surfaces using Waste PET |
| Fabrication of Supportless Lattice Structures Using Burst Mode Drop-on-Demand Liquid Metal Jetting |
| Fabrication of Thick Vascularized Tissues using Sacrificial Ink-assisted Embedded 3D Bioprinting |
| Failure Mechanisms in Grading Inconel 625-GRCop 42 via Hybrid Wire-powder Directed Energy Deposition |
| Fatigue Endurance Investigation of Post-processed Surfaces of L-PBF Ti-6Al-4V under Flexural Stress |
| Fatigue Life Prediction of Functionally Graded TPU and PLA Components Produced by Material Extrusion |
| FE Predictions of Residual Stresses in L-PBF Generated Ti-6Al-4V NIST Bridges |
| Feasibility of Non-destructive Measurement of Powder Bed Density and Thermal Properties Using Flash Thermography |
| Fiber-Reinforcement of Binder-Jetted Casting Molds for Multiple Usage |
| Formation of Easy-to-Remove Support Structures in Metal LPBF with En-situ Powder Bed Doping. |
| Framework Development for Optimization of DED Parameters using Nickel-Aluminum Bronze Feedstock and Arc Wire Directed Energy Deposition |
| Fundamentals of Polymer Crystallization in Laser Powder Bed Fusion for New Material Screening |
| Further Developments of a Novel Low Cost Material Jetting platform for 3D Printing |
| Fused Filament Fabrication of Polymer Blends with In Situ Layerwise Chemical Modifications |
| G-Wing: A Novel Software Tool for Toolpath-Centric Design of Wings for Material Extrusion |
| Gas Flow and Delivered Laser Power Effects on Mechanical Properties |
| Generation and Simulation of Layer Wait Time to Prevent Overheating |
| Generative Design of 2D Cellular Structures through Stochastic Modification of 2-Honeycombs |
| GKN Aerospace Deposition of a Laser Wire DED 2.5m Titanium Aerostructure Demonstrator |
| Guided Manual Design for Additive Manufacturing of Topologically Optimized Legacy Tooling Parts |
| Halogen-free Flame-retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis |
| High-precision Measurement of Melt Pool Properties during Laser-based Powder Bed Fusion of Metals by High-speed Imaging |
| High-speed Observations and Quantification of Spatter Counts and Trajectories in
Laser Powder Bed Fusion
|
| High Fidelity Model of Directed Energy Deposition: Laser-Powder-Melt Pool Interaction and Effect of Laser Beam Profile on Solidification Microstructure |
| High Frequency Ultrasonic Detection of Security Markers in Additive Manufacturing Components |
| High Speed Video Imaging of overhang surfaces in Beam Shaped Laser Powder Bed Fusion of 316L stainless steel |
| How Good is Good Enough? The Economics of In-process Monitoring in AM |
| Hybrid Electromagnetics: Printed RF Sensitive Structures, Circuits, and Sensors Integrated with Non-traditional Electromagnetic Substrates |
| Hybrid Geometry/Property Autoencoders for Multi-Lattice Transitions |
| Hybrid Manufacturing: How Interleaving Processes Enables Local Control of Material Performance |
| Hybrid Metal Manufacturing of Large Freeform Geometries |
| Hybrid Metalized Polymer Core (HMPC) Initial Results of Prototype Mass Optimized Pulsed Power Hardware |
| Hybrid Metalized Polymer Core (HMPC), Initial Concept and Design of Lightweight Additively Manufactured Hardware |
| Identification of Nanoparticles Dispersion Mechanism in 316L Matrix Additively Manufactured By
hybrid Process of Ink Jetting and Laser Powder Bed Fusion
|
| Impact of Powder Deposition Parameters on Powder Catchment Efficiency in Laser Directed Energy Deposition |
| Implementing In-situ Process Monitoring in Additive Manufacturing to Accelerate Qualification |
| Improving Fatigue Performance of PBF Metals using Self-terminating Etching Processes |
| Improving Food 3D Printing Through Texture Modification of Designed Food Inks |
| Improving the Mechanical Response of the IWP Exo-skeletal Lattice Through Shape Optimization |
| In- and Ex-situ Neutron Characterization of Metal Additive Processes and Microstructures |
| In-situ Defect Detection for Laser Powder Bed Fusion with Active Laser Thermography |
| In-situ Electrical Resistance Measurements for Soldering Studies in Hybrid AM |
| In-situ Geometric Characterization via Embedded 3D Scanning and Implicit Modeling |
| In-situ Interferometric Monitoring of Dual-wavelength Vat Photopolymerization |
| In-situ Monitoring of Wire Arc Additive Manufacturing for Machine Learning Based Prediction of Shape Irregularites and Mechanical Defects |
| In-situ Process Monitoring System for Large Format Thermoplastic Additive Manufacturing |
| In-situ Reinforcement Processing for Laser Powder Bed Fused Ti64 Parts |
| Increasing Precision Towards NiTi Lattice Structure using PBF-EB |
| Inexpensive Mechanistic-Knowledge-Agnostic Machine Learning in Additive Manufacturing |
| Influence of In-process Layer-wise Surface Property on the Mechanical Properties of Laser Powder Bed Fusion Products |
| Influence of Silane-doped Argon Processing Atmosphere on Powder Recycling and Part Properties in L-PBF of Ti-6Al-4V |
 Influence of steel alloy composition on the process robustness of as-built hardness in laser-directed energy deposition |
| [Replication or Save Conflict] |
| Influence of Substrate Temperature on the Formation of Individual Weld Paths during Laser Cladding (LMD) when Processing 316L. |
| Influence of TiC-Nanoparticles on the Material Properties of AlSi10Mg Manufactured by Laser Powder Bed Fusion |
| Infrared Camera (IR) Feature Extraction for Defect Detection in Laser Powder Bed Fusion |
| Insights from High-speed Synchrotron X-ray Imaging of Binder-powder Interaction in Binder Jet Printing |
| Inter-pass Temperature Impact in Wire-Arc Additive Manufacturing |
| Investigating Correlation Between Melt Pool and Overhang Surface |
| Investigating the Effect of Generalized Newtonian Fluid on the Micro-void Development within Large Scale Polymer Composite Deposition Beads |
| Investigating the Effects of Thermal Post-processing Parameters on Interfacial Delamination of Bimetallic 3D Printed Parts |
| Investigation of Crack Formation Process during Low Temperature Laser Sintering of PEEK by Observing Melt and Solidification Behavior |
| Investigation of Electrical Properties in TPU/CNT Conductive Composites |
| Investigation of Instrumenting Robocasting Printer for Ceramic Slurries |
| Investigation of Multi-Material Liquid Metal Jetting with Copper Materials |
| Investigation of the Influence of Process Parameters to Increase Productivity in the LPBF Process for the Material Inconel 718 |
| Investigation of the Processability of Polyether Block Amide in High Speed Sintering |
| Johnson-Cook Failure Model for Additively Manufactured 304L Stainless Steel Parts |
| Laser beam shape optimization: Exploring alternative profiles to Gaussian-shaped laser beams in powder bed fusion of metals |
| Laser Induced Breakdown Spectroscopy for In-situ Monitoring of Laser Powder Bed Fusion Processing |
| Laser Synthesized Molybdenum Trioxide (MoO3) Nanoparticles for Energy Storage Applications |
| Layer-wise Control Charts in Laser Powder Bed Fusion Metal Additive Manufacturing |
| Layer-wise In-process Monitoring-and-Feedback System Based on Surface Characteristics Evaluated by Machine-Learning-Generated Criteria |
| Layer-wise Prediction of Microstructural Evolution in Laser Powder Bed Fusion Additive Manufacturing using Physics-based Machine Learning |
| Layer-wise Prediction of Microstructure Evolution in Laser Powder Bed Fusion Additive Manufacturing using Physics-based Machine Learning |
| Level Set Grids for Hybrid Manufacturing |
| Liquid Metal Jet-on-Demand Printing of Al-6061 |
| Liquid Metal Jetting of Aluminum Parts with Salt Support Structures |
| Localized Porosity Prediction in Laser Powder Bed Fusion via Deep Learning of Multi-modal Melt Pool Signatures |
| Localized Shielding Gas Lens and Inert Enclosure Effects on Titanium GMAW for Wire-Arc Additive Manufacturing |
| Lost-PLA Casting Process Development Using Material Extrusion with Low-density PLA |
| Machinability of Additively Made Alloys: A Case Study of Ti64 and A205 Alloys |
| Machine-Learning-Driven Digital Twin Construction for Additive Manufacturing: A Review |
| Machine Learning-Assisted Prediction of Fatigue Behaviour in Fiber-Reinforced Composites Manufactured via Material Extrusion |
| Machine Learning Applied to
Process Monitoring for Laser Hot Wire Additive
Directed Energy Deposition
|
| Machine Learning Assisted Mechanical Metamaterial Design for Additive Manufacturing |
| Magnetic Characterization of 3D Printed High-performance Polyamide Magnetic Composite |
| Manufacturability of Custom Shape-conforming Battery Components using VPP |
| Manufacturing of Foam Dampening Structures for Machining Applications |
| Material Jetting of Suspension System Components |
| Materials Screening Methodology for Additive Manufacturing in Bioreactor Technology |
| Mechanical and Corrosion Response of Minor and Trace Elements in CoCrMo Alloy Powders on Additively Manufactured Dental Crowns and Bridges |
| Mechanical and Dimensional Characterization of Polymer Powder Bed Fusion Parts for Non-assembly Mechanisms |
| Mechanical Performance of LPBF Manufactured Haynes 282 |
| Mechanical Properties of Polymer-bonded Magnets Fabricated using Magnetic Field Assisted Additive Manufacturing (MFAAM) |
| Mechanical Surface Treatment of Polymer Parts Produced by FFF |
| Mechanical Test Plan of Niobium Alloy C103 for Laser Powder - Direct Energy Deposition |
| Mechanically Bonding and Thermally Releasing Print Surface for Big Area Additive Manufacturing |
| Metal Additive Manufacturing of A36 Steel to Improve Techno-economic Performance of Marine Renewable Energy Technology |
| Metal Additive Manufacturing of Rollers for Railroad Bearings: Rolling Contact Fatigue Performance |
| Method to Balance Thermals for Multi-functional 3D MJF Printing |
| Methodical Approach to Reducing Design Time by using Neural Networks in Early Stages of Concept Development |
| Microstructural and Microhardness Variations of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 Due to Machine Variability and Thickness for Aerospace Applications |
| Microstructural Investigations on SS316L-Cu Graded Deposition Prepared using Wire Arc Additive Manufacturing |
| Microstructure and Mechanical Properties of Additively Manufactured Haynes 282: A Comparative Analysis between L-PBF and LP-DED Technologies |
| Microstructure and Tensile Properties of Aluminum Alloy 4008 (A356) Processed via Liquid Metal Jetting |
| Microstructures, Mechanical and Thermal Property Evaluation of Binder Jet Printed High Conductivity Copper Parts. |
| Microtensile Analysis of Additively Manufactured Ti–6Al–4V with Process Parameter Induced Defects |
| Mining Complex Feedstock-Geometry-Process-Quality Relationships for Powder Bed Fusion Thin Features using Graphical Model |
| Modeling and Correcting Illumination Inhomogeneity over Multiple DLP Illumination Intensities for Better Fabrication Accuracy |
| Modeling and Simulation of Vat Photopolymerization Additive Manufacturing: A Review
|
| Modeling Carbon Fiber Suspension Dynamics for Additive Manufacturing Polymer Melt Flows |
| Modeling Morphological Development of Ti-6Al-4V for Cyclic Thermal Histories in Laser Powder-bed Fusion |
| Modifying Glass Surface Morphology via Temperature-controlled Laser Melting |
| Molybdenum Trioxide (MoO3) Nanosheets Imbedded Carbon Nanofibers for Lithium-ion
Batteries |
| Monitoring of Process Stability in Laser Wire Directed Energy Deposition using Machine Vision |
| Monitoring of Process Stability in Laser Wire Directed Energy Deposition using Machine Vision |
| Monitoring of Single-track Quality in Laser Powder Bed Fusion using In-situ Thermionic Sensing |
| Monitoring of Single-track Quality in Laser Powder Bed Fusion using In-situ Thermionic Sensing |
| Multi-bead and Multilayer Printing Geometric Defect Identification Using Single Bead Trained Models |
| Multi-laser Diode Area Melting of Ti6Al4V: A Novel Alternative Approach to Traditional Laser Powder Bed Fusion |
| Multi-load Support Optimization for Minimizing Part Deformation in LPBF |
| Multi-material Design in Metal Additive Manufacturing |
| Multi-physics Modeling of Low-temperature Directed Energy Deposition of Stainless Steel 316L |
| Multimodal Process Monitoring to Predict Outcomes during Laser Powder Bed Fusion |
| Nanoparticle-modification of NiCu-based Alloy 400 for Laser Powder Bed Fusion |
| NASA Technology Maturation Plan for In-space Manufacturing of Metals |
| Non-linear Dynamic Modelling of Cartesian-frame FFF 3-D Printer Gantry for Predictive Control |
| Novel Concepts to Integrate Dense and Sparse Infill Regions in Material Extrusion AM Parts |
| Novel Welding Strategies in High Deposition Rate Laser-Assisted Double-Wire Welding Process with Nontransferred Arc |
| NSF Advanced Manufacturing Program and Funding Opportunities |
| Numerical and Experimental Investigations on Manufacturability of Al-Si-10Mg Thin Wall Structures Made by LB-PBF |
| Numerical Investigation of the Spreading and Dynamic Flow Behavior of Poorly Sorted Sand Particles during Binder Jet Additive Manufacturing |
| Off the Grid: Re-defining Design Resolution in Inkjet 3D-printing for Sub-droplet Position Control and Facile Geometry Improvement |
| On Process Stability In WAAM-CMT of Aluminum Alloys |
| On the Effect of Recoater Damage on Spreading Behavior |
| Open Architecture Control Software for Laser Powder Bed Fusion Machines |
| Open Loop Control of Selective Laser Flash Sintering of Ceramics |
| OpenVCAD: An Open Source Volumetric Multi-material Geometry Compiler |
| Optical Metrology for Laser-matter Interaction in LPBF: Challenges and Opportunities |
| Optimal Planning and Control for Microhardness Demonstrated in Thin-walled Steel Parts Made via Wire Arc Additive Manufacturing |
| Optimization of Computational Time for Digital Twin Database in Directed Energy Depostion for Residual Stresses |
| Optimizing the Surface Texture and Chemistry of Laser Powder Bed Fusion (LPBF) Haynes
282 for Increased Solar Absorptance |
| Origami Robocasting of High-density Ceramic Structures with Slurry-based Inks |
| Out-of-plane Mechanical Properties of Additively Manufactured Fractal Reinforced Structures |
| Oxide Dispersion Strengthened (ODS) SS316L Prepared by Laser Powder Bed Fusion: Analysis of Microstructure and Hardness Properties |
| Parametric Analyses of Impact of Deposition Pressure on Multi-axis Free-form Fabrication. |
| Parametric Study of Processing of Ti6Al4V with Multiple 450 nm Diode Lasers |
| Part Scale Simulation of Heat Affected Zones for Parameter Optimization in a Microscale Selective Laser Sintering System |
| Path Planning for Non-Planar Robotic Additive Manufacturing |
| PEEK Parameter Optimization for Fused Deposition Modeling |
| Photoinhibition Aided Vat Photopolymerization (PinVPP) Additive Manufacturing |
| Photothermal Bleaching of Nickel Dithiolene for Bright Multi-colored 3D Printed Parts
|
| Physical Validation of Job Placement Optimization in Cooperative 3D Printing |
| Powder Bed Fusion of Polypropylene-ethylene Co-polymers |
| Powder Bed Fusion of Ultra-high Molecular Weight Polyethylene via Novel Scan Strategy and Post-process |
| Powder Bed Fusion Surrogate Models via Convolutional Neural Networks |
| Predicting Temperature Field for Metal Additive Manufacturing using PINN |
| Predicting the Printable Parameter Space for Laser Directed Energy Deposition Using a Data Augmented Thermal Model |
| Prediction of Inter-pass Temperature for Large-scale Double Sided Component Fabricated Electron Beam Wire Additive Manufacturing |
| Printing Parameter Optimization of Extruded Metal Paste by Response Surface Technique |
| PRISM: Process Parameter Optimization for Selective Manufacturing |
| Probing Temperature and Degree-of-conversion States via Tomographic Fluorescence Imaging |
| Process-integrated Alloy Adjustment in Laser Deposition Welding with Two Wires |
| Process and Design Strategies for Fluid Wicking in Additively Manufactured Inconel 718 for Monolithic Heat Pipes |
| Process and Material Optimisations for Integration of Chopped Glass Fibres in Laser Sintered Polymer Parts |
| Process Modeling for Fluid-Interface Supported Resin Printing |
| Process Modeling of Multi-Material Laser Powder Bed Fusion |
| Process Parameter Optimization Using Photodiode Intensity in Laser Powder Bed Fusion |
| Process Parameters and Interpass Temperature Effects on WAAM Inconel 718 |
| Process Strategy and Geometrical Distortion of Heat-treated 17-4PH Stainless Steel Produced by Interleaved Machining and Blown-powder DED |
| Process Structure Relationships of Carbide Containing Molybdenum Alloys Produced via Electron Beam Powder Bed Fusion |
| Providing Anti-counterfeiting Security in Binder Jetting through Tailored Porosity Signatures |
| Pushing Boundaries: Machine Learning Applied to Selective Laser Melting |
| Qualification of Low-criticality AM Components in an Expeditionary Environment |
| Quantification of Residual Stress in Directed Energy Deposition Additive Manufacturing via Bridge Method |
| Quasistatic Energy Absorption in Aperiodic Cellular Materials |
| Rapid Foam Foundry: The Future of Foam Foundry |
| Real-time Image-based Quality Control for Bio-additive Manufacturing through Layer-by-layer Analysis |
| Real-time Melt Pool Characterization in Laser Powder Bed Fusion Using Acoustic and Photodiode Monitoring |
| Real-time Monitoring of Directed Energy Deposition Additive Manufacturing Process Using Multiple Sensors and Machine Learning |
| Real Time Quantification of Shear-induced Molecular Ordering in Direct Write Printing of Bottlebrush Based Polymer Networks |
| Residual Stress Analysis of Laser Powder Blown Inconel 718 Across Different Overhang Angles and Laser Outputs |
| Residual Stress Estimation in a Complex Additively Manufactured Component with an Internal State Variable Material Model |
| Resource Efficiency of the Robot-based Hybrid Additive Manufacturing Chain |
| Revealing and Controlling Process Instabilities for Defect Lean Metal Additive Manufacturing |
| Robot-aided selective embedding of a spatially steered fiber in polymer composite parts made using vat photopolymerization |
| Robotic Automation for Depowdering in Binder Jet Additive Manufacturing |
| Robotic Wire-fed Additive Manufacturing for Forging Industry. |
| Role of In-situ Monitoring Technique for Digital Twin Development using Direct Energy Deposition: Melt Pool Dynamics and Thermal Distribution |
| Self-heating Tooling on BAAM using Co-extruded Heating Wires |
| Self-repair of Defects: The Achilles Heel for In-process Detection of Small Pores? |
| Side on Plasma Emission Spectroscopy of TiAl6V4 During Laser Scanning |
| Simulation Based Optimization for High Frequency Piezo-actuated Molten Metal Droplet Jetting |
| Simulation of Anisotropic Mechanical Behavior of Additively Manufactured Ti-6Al-4V Wall Structures using VPSC |
| Single Path Generation for Closed Contours via Graph Theory and Topological Hierarchy |
| Slurry-based Binder Jetting of Ceramic Casting Cores |
| SmartScan Extension: Enhancing Temperature Uniformity in 3D Laser Powder Bed Fusion Additive Manufacturing for Reduced Part Defects and Distortions |
| Solid-state Production of Uniform Metal Powders for Additive Manufacturing by Ultrasonic Vibration Machining |
| Solidification Behavior, Texture Evolution, and Mechanical Behavior of Large Scale Fusion Additively Manufactured Steels: Interplay Between Chemistry and Unique Processing Conditions |
| Spreading and Packing of Ceramic Powder Using a Displacement-controlled Roller in SLFS |
| State-of-the-art Cyber-enabled Physical and Digital Systems Deployed in Distributed Digital Factory Using Additive and Subtractive Manufacturing Systems: Open, Scalable, and Secure Framework |
| Static Mixing Nozzles for Long and Short Fiber Additive Extrusion Processes |
| Stimuli Driven Morphing of Printed Liquid Crystal Elastomers |
| Streaming in Additive Manufacturing: Analyzing the Impact on the Powder Bed Fusion of Metals Process Chain |
| Strength Enhancement of cellular structures through selective reinforcement of elements based on analytical modeling |
| Strengthening FFF Parts via Annealing with Structured Dual Material Filaments and Dissolvable High-temperature Shells |
| Structural Analysis and Design of Mantis Shrimp-inspired Composites for Enhanced Impact Resistance |
| Structural Stability During Thermal Post-curing of Direct Ink Write Thermoset Composites |
| Surface Roughness Formation and Measurement for Metals Built with Laser Powder Bed Fusion |
| System Identification of Fused Filament Fabrication Additive Manufacturing Extrusion and Spreading Dynamics |
| Tailoring Anisotropic Material Properties of Hierarchical Lattice Structures through Strut Diameter and Orientation Variations: Implications for 3D-printed Ti6Al4V Lattices |
| Tailoring Mechanical Behaviors through Programmable Lattice Structures |
| Test Submission for Proceedings |
| Testing Protocol Development for Fracture Toughness of Parts Built with Big Area Additive Manufacturing |
| The Detection of Defects Caused by Reduced or Interrupted Shield Gas Flow in Laser Powder Bed Fusion |
| The Development of a Directed Energy Deposition (DED) Printability Framework for Improving Part Density and Performance in High Strength Martensitic Steels |
| The Effect of LaserSscan Strategy on Residual Stress of Titanium Alloys Using Laser Foil Printing Additive Manufacturing Processes |
| The Effect of Near-surface Pores on Fatigue Life of Ti-6Al-4V Components |
| The Effect of Thermal Conditions on Process Defects in Electron Beam Directed Energy Deposition |
| The Influence of Heat Treatments on the Microstructure and Tensile Properties of Additively Manufactured Inconel 939 |
| The Use of Laser Preheating for Microstructural Customization of Ti6Al4V Processed Using Diode Point Melting System |
| The Variation of Mechanical Properties of M300 Maraging Steel Manufactured with Varying Process Parameters in Laser Powder Bed Fusion |
| The WAAM Number: A Dimensionless Number for Predicting Wire Arc Additive Manufacturing Bead Geometry |
| Thermal Imaging for Wire Arc Additive Manufacturing Using an Off-the-shelf Color Camera |
| Thermal Monitoring and Cure Process Modelling of Dual-wavelength VPP Printing |
| Thermal Simulation of the Material Extrusion Process with Different Print Bed Boundary Conditions |
| Thermal Stress Prediction in in Laser Powder Bed Fusion |
| Thermomechanical Modeling and Fabrication of Tungsten Carbide-nickel Geometries Through Laser Powder Bed Fusion |
| Thin Strand Printing of Silicone Ink with Direct Ink Write Process |
| Thin Wall Manufacturing in Laser Powder Bed Fusion for Heat Exchanger Applications |
| Time-optimal Path Planning for Heterogeneous Robots in Swarm Manufacturing |
| Time-resolved Optical Spectroscopy in Metal Powder Bed Fusion |
| Toolpath Planning Approach for Parts with Multiple Revolving Features for Wire Arc Additive Manufacturing. |
| Topology Optimization of Continuous Fiber-reinforced Composites Considering Manufacturing Constraints |
| Toward Post-superficial Temperature Monitoring During Additive Manufacturing through Data-driven Inpainting |
| Toward Voxel Level Control for Laser Powder Bed Fusion Additive Manufacturing Process |
| Towards a FAIR Knowledge Management System for Additive Manufacturing |
| Towards a Generic Deposition Model in Wire-arc Directed Energy Deposition: A Deep Learning-based Wetted Area Prediction Model |
| Towards Experimental Process Parameter Development for Ti-6Al-4V TPMS Lattice Structures with Application to Small Scale Dental Implants using Micrographs |
| Towards Functionally Graded Materials Using Wire-arc Technology |
| Towards High-throughput Assessment
of Printability in Refractory Alloys Systems for Laser-powder Bed Fusion |
| Towards Large-scale Grain Growth Modeling in Powder Bed Fusion |
| Towards Large-scale Grain Growth Modeling in Powder Bed Fusion |
| Towards the Limits in Copper Lattice Production via Fiber Laser Powder Bed Fusion |
| Transmitting G-Code with Geometry Commands for Extrusion Additive Manufacturing |
| Two-color Thermal Imaging of WC-Ni Cermet Melt Pools in Laser Powder Bed Fusion |
| Ultrasonic Non-destructive Characterization of Anisotropic Additively Manufactured Polymers |
| Uncovering Fundamental Process Deficiencies in Wire-laser Directed Energy Deposition using In-situ High Speed Imaging |
| Understand Powder Deposition Behaviors of a Novel Electrostatic Powder Spreading Technique Using Particle Dynamics Simulation |
| Uniaxial Fatigue Behavior and Life Prediction of Additively Manufactured Inconel 718 with Different Grain Morphology |
| Unveiling Melt Pool Defect Signatures with Interpretable Machine Learning |
| Unweaving the Macrostructure of the Venus Flower Basket: From Bio-morphism to Biological Insight |
| Usage of Unconventional Data Sources for Market Intelligence (MI) in the Field of Additive Manufacturing (AM) - Expert Networks, Technology Territories and Trends |
| Use of a Vibrating Build Platform during Powder-bed Fusion of Metals Using a Laser Beam |
| Using In-situ Two-color Thermal Imaging to Validate Multi-physics CFD Melt Pool Models for LPBF |
| Variational Autoencoders for Comprehensive Feature Identification in Fatigue Analysis
|
| Virtual Inspection of Advanced Manufacturing via Digital Twins |
| Volumetric Additive Manufacturing of Glass |
| Voxel-free Radon Transform for Improving Surface Quality in Computed Axial Lithography |
| Wide-field Low-coherence Interferometry for Keyhole Depth Measurements in Laser Powder Bed Fusion |
| Wire Arc Additive Manufacturing in Steel Foundries |
| Wire + Arc Additive Manufacturing of Cryogenic Liquid Hydrogen Storage Tank Demonstrator |
| X-ray Computed Tomographic Study of Density Gradients within Binder Jet Printed H-13 Components |
| X-Ray Computed Tomography: A Game-Changer for Parameter Control in Additive Manufacturing |
| You Must Unlearn What You Have Learned: Establishing a DfAM Mindset in the Face of Centuries of Traditional Manufacturing |